Surface modification of commercial carbon black by silane coupling agents for improving dispersibility in rubber compounds

The dispersion of a filler in a rubber matrix is a crucial parameter affecting the mechanical and dynamical properties of a rubber compound. It is the current issue of the rubber compounding industry because, most fillers are categorized as a mineral, while the rubber is an organic material. The surface modification of the filler has been accepted as an effective technique for the improvement of the abovementioned parameter. First, the surface premodification of commercial carbon black with a grade of N660 (CB) was implemented by four different oxidation methods. After that, among of used methods, the oxidation method using citric acid was selected to produce modified carbon black (CB-Oxi) for further treatment. Subsequently, the coupling agent, Bis[3-(triethoxysilyl)propyl] tetrasulfide (TESPT) was functionalized on the surface of CB-Oxi to produce modified-CB-Oxi. Also, for comparison purposes, the TESPT functionalization was accomplished on untreated CB to form modified-CB. The FTIR spectra of CB-Oxi showed using the premodification method introduced the hydroxyl and carboxyl groups on the surface of CB. The correspondent spectra for modified-CB-Oxi confirmed the existence of silane groups on the surface of the carbon black. However, the mentioned silane groups were not observed on the surface of modified-CB. The findings were strengthened by several characteristic techniques including, FESEM, XRD, EDS, CHNS elemental analysis, and RAMAN spectra. The FESEM graphs and elemental mapping showed homogeneous dispersion and uniform distribution of sulfur and silicon elements on the modified-CB-Oxi surface. According to RAMAN spectra, the disturbance in the structure of carbon black graphite was reduced after surface modification. modified-CB-Oxi is proposed as a potential substitute filler for current commercial carbon black in rubber compounding.     

Determination of performance of non-ideal aluminized explosives

Non-ideal explosives can have Chapman-Jouguet (C-J) detonation pressure significantly different from those expected from existing thermodynamic computer codes, which usually allows finding the parameters of ideal detonation of individual high explosives with good accuracy. A simple method is introduced by which detonation pressure of non-ideal aluminized explosives with general formula C(a)H(b)N(c)O(d)Al(e) can be predicted only from a, b, c, d and e at any loading density without using any assumed detonation products and experimental data. Calculated detonation pressures show good agreement with experimental values with respect to computed results obtained by complicated computer code. It is shown here how loading density and atomic composition can be integrated into an empirical formula for predicting detonation pressure of proposed aluminized explosives.     

Development of a stakeholder identification and analysis method for human factors integration in work system design interventions – Change Agent Infrastructure

In any work system design intervention—for example, a physical workplace re-design, a work process change, or an equipment upgrade—it is often emphasized how important it is to involve stakeholders in the process of analysis and design, to gain their perspectives as input to the development, and ensure their future acceptance of the solution. While the users of an artifact or workplace are most often regarded as being the most important stakeholders in a design intervention, in a work-system context there may be additional influential stakeholders who influence and negotiate the design intervention's outcomes, resource allocation, requirements, and implementation. Literature shows that it is uncommon for empirical ergonomics and human factors (EHF) research to apply and report the use of any structured stakeholder identification method at all, leading to ad-hoc selections of whom to consider important. Conversely, other research fields offer a plethora of stakeholder identification and analysis methods, few of which seem to have been adopted in the EHF context. This article presents the development of a structured method for identification, classification, and qualitative analysis of stakeholders in EHF-related work system design intervention. It describes the method's EHF-related theoretical underpinnings, lessons learned from four use cases, and the incremental development of the method that has resulted in the current method procedure and visualization aids. The method, called Change Agent Infrastructure (abbreviated CHAI), has a mainly macroergonomic purpose, set on increasing the understanding of sociotechnical interactions that create the conditions for work system design intervention, and facilitating participative efforts.     

Preparation of Electrospun Electroactive Nanofibers of Four Arm Star-Shaped Poly(ε-Caprolactone)-b-Poly(2-Hydroxyethyl Methacrylate) and Its Blends with Polyaniline

A combination of ring-opening polymerization and atom-transfer radical polymerization was used to synthesize a four-arm star-shaped poly(ε-caprolactone)-b-poly(2-hydroxyethyl methacrylate). The structure of obtained copolymer was determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopies. The uniform electroactive nanofibers consisting blend of four-arm star-shaped poly(ε-caprolactone)-b-poly(2-hydroxyethyl methacrylate) copolymer and polyaniline were produced using electrospinning technique. The electroactivity of prepared nanofibers was investigated using cyclic voltammetry measurement. The morphologies of electrospun nanofibers produced from four-arm star-shaped poly(ε-caprolactone)-b-poly(2-hydroxyethyl methacrylate) and their blends with polyaniline were investigated by the scanning electron microscopy. The presence of polyaniline resulted in significant decrease of sticking fibers.     

PIG Ion Source with Permanent Magnets: Model Based Anode Current Return Circuit

Ion sources are widely used in fusion technologies. A new high voltage pulsed power supply for use in penning ion gauge ion sources is proposed in this paper. To use discharge current, a diode-capacitor bank is included. The power supply is composed of 3 stages. A fast switching transistor is used as a single switch which is trigged by a pulse generator. A transformer is used to level up the voltage up to 2?kV without power loss. It is also used to isolate input and high voltage output. Also; the proposed high voltage power supply implementation uses a diode-capacitor bank whose capacitors are charged during plasma discharge. This system structure gives compactness and easiness to implement the total system which in combination with inexpensive commercially available components, makes the unit versatile and inexpensive.     

pH sensitivity and swelling behavior of partially hydrolyzed formaldehyde-crosslinked poly(acrylamide) superabsorbent hydrogels

Poly(acrylamide) superabsorbent hydrogel was synthesized through crosslinking method. Formaldehyde was used as a crosslinking agent. To achieve a hydrogel with high swelling capacity, the resulted hydrogels were saponified using NaOH solution at high temperature. During saponification, ammonia gas is produced from hydrolysis reaction of amide groups. The arising of ammonia produces porous structure in hydrogels, which is confirmed using scanning electron microscopy. The conversion of amide groups to carboxylate groups was identified by FTIR spectroscopy. The reaction variables in both crosslinking and hydrolysis reactions that affect the swelling of hydrogels were optimized. The swelling of the hydrogels in various salt solutions with various valencies and radii was studied. Also, the absorbency under load was measured. The hydrogels exhibited pH-sensitivity characteristics. A sharp swelling change was observed in lieu of pH variations in a wide range (1–13). The swelling variations were explained according to the swelling theory based on the hydrogel chemical structure. The pH-reversibility and on–off switching behavior makes the intelligent hydrogels as good candidates for considering as potential drug carries. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Combined-gasification of biomass and municipal solid waste in a fluidized bed gasifier

Due to the environmental problems associated with burning of fossil fuels and population growth, more attention has been paid to develop renewable energies in recent years. Among all options for renewable energy utilization, biomass gasification is more popular because of environmental benefits and economic issues. In the present study, a series of experiments were carried out to study the influence of blending ratio, reaction temperature, equivalence ratio (ER) on co-gasification characteristics of pine sawdust (SD) and municipal solid waste (MSW). By increasing the blending ratio from 100% SD to 100% MSW, CO and CH₄ respectively increased from 16.7 to 18.8 vol% and from 4.1 to 5.1 vol%, while an opposite trend was found for H₂ and CO₂. Over the ranges of the experimental conditions used, the tar content and gas yield varied from 5.4 to 10.1 g/Nm³ and 1.34 to 1.15 Nm³/kg, respectively.     

Low-temperature sol-gel-derived nanosilver-embedded silane coating as biofilm inhibitor

Silver nanocomposite coatings are prepared by the sol-gel method for the prevention of biofilm formation on the surface of medical implanted devices. High-temperature processing of such coatings can lead to diffusion of nanosilver and reduce the amount of available silver particles for long-term effects. Using a low-temperature sol-gel method, we have successfully prepared silane-based matrices, phenyltriethoxysilane (PhTEOS), containing different amounts of Ag nanoparticles. The incorporation of a silver salt into the sol-gel matrix resulted in a desired silver release rate, i.e. high initial release rate followed by a lower sustained release for more than 15 days, as determined by inductively coupled plasma mass spectrometry (ICP-MS). Scanning electron microscopy (SEM) has been employed to investigate the morphology of the film surfaces before and after immersion in a nutrient-rich bacterial suspension of approximately 10? CFU ml?1, which was incubated for up to 30 days at 37?°C. It was found that thin films containing 35 nm particles could prevent the formation of biofilm for over 30 days. The presence of surface silver before and after 3, 9 and 15 days immersion was confirmed by x-ray photoelectron spectroscopy (XPS).