NaxSr1-2xMoO4∶Eux^3＋的制备及其发光性能的研究

采用高温固相法结合电荷补偿方式2Sr2＋→Eu3＋＋Na＋,合成了适合白光LED的红色荧光材料NaxSr1-2xMoO4∶Eux^3＋（x=0.1、0.15、0.2,0.25、0.3）系列样品.对样品分别进行了X射线衍射（XRD）分析和荧光光谱的测定.测试结果表明,NaxSr1-2xMoO4∶Eu3x＋荧光粉可以被近紫外光（UV）（393 nm）和蓝光（463 nm）有效激发.通过探讨Na＋和Eu3＋的掺杂浓度对发光强度的影响,得出NaxSr1-2xMoO4∶Eux3＋系列样品的发光强度比SrMoO4：Eu3＋明显增加,且当掺杂量x=0.2时,NaxSr1-2xMoO4∶Eux3＋系列样品在616 nm处的发光强度最大.分析了NaxSr1-2xMoO4∶Eux3＋系列样品在380 nm紫外光激发下的色坐标,当Na＋和Eu3＋的掺杂量x=0.15时,样品的红色显色最强.     

Luminescence properties of Eu3＋ and Ho3＋ in SreTiO4

Eu3+ and Ho3+ doped Sr2TiO4 were synthesized by using solid-state reactions. Samples sintered at 1300 oC for 6 h could be indexed to Sr2TiO4 with a single phase. Eu3+ in Sr2TiO4 emitted orange light under the excitation at 365 nm in a broad band which was coupled well with the strongest emission of high pressure mercury vapor lamps. Ho3+ in Sr2TiO4 emitted yellow light under blue excitation from 450 to 460 nm which agreed well with the emission of blue InGaN-based light-emitting diodes. The present results indicated that Sr2TiO4 was a promising host for high pressure mercury vapor lamps or white light-emitting diodes.     

表面态型半导体可饱和吸收镜实现Yb∶YAG激光器被动锁模

制作了一种新型的半导体可饱和吸收镜:表面态型半导体可饱和吸收镜.用表面态型半导体可饱和吸收镜作为被动锁模吸收体,实现了半导体端面泵浦Yb∶YAG激光器被动连续锁模.在泵浦功率为1 0 W时,获得了连续锁模脉冲序列,重复频率2 0 0 MHz,锁模脉冲平均输出功率为70 m W.在未加任何色散补偿的情况下,脉冲宽度为4 .35 ps     

“激光原理”实验教学改革的探索与实践

文章针对“激光原理”课程的特点，对激光原理实验的教学方法、实验设置、以及实验内容等进行了探索，并在实际教学中进行了实践。     

表面态型半导体可饱和吸收镜实现Yb:YAG激光器被动锁模

制作了一种新型的半导体可饱和吸收镜:表面态型半导体可饱和吸收镜.用表面态型半导体可饱和吸收镜作为被动锁模吸收体,实现了半导体端面泵浦Yb:YAG激光器被动连续锁模.在泵浦功率为10W时,获得了连续锁模脉冲序列,重复频率200MHz,锁模脉冲平均输出功率为70mW.在未加任何色散补偿的情况下,脉冲宽度为4.35ps.     

表面态型半导体可饱和吸收镜实现Yb:YAG激光器被动锁模

制作了一种新型的半导体可饱和吸收镜:表面态型半导体可饱和吸收镜.用表面态型半导体可饱和吸收镜作为被动锁模吸收体,实现了半导体端面泵浦Yb:YAG激光器被动连续锁模.在泵浦功率为10W时,获得了连续锁模脉冲序列,重复频率200MHz,锁模脉冲平均输出功率为70mW.在未加任何色散补偿的情况下,脉冲宽度为4.35ps.     

NaxSr1-2xMoO4:Eu3+x的制备及其发光性能的研究

采用高温固相法结合电荷补偿方式2Sr2+→Eu3+ +Na+,合成了适合白光LED的红色荧光材料NaxSr1-2x MoO4:Eu3+x(x=0.1、0.15、0.2,0.25、0.3)系列样品.对样品分别进行了X射线衍射(XRD)分析和荧光光谱的测定.测试结果表明,NaxSr1-2xMoO4:Eu3+x荧光粉可以被近紫外光(UV)(393 nm)和蓝光(463 nm)有效激发.通过探讨Na+和Eu3+的掺杂浓度对发光强度的影响,得出NaxSr1-2xMoO4:Eu3+x系列样品的发光强度比SrMoO4:Eu3+明显增加,且当掺杂量x=0.2时,NaxSr1-2xMoo4:Eu3+x系列样品在616 nm处的发光强度最大.分析了NaxSr1-2xMoO4:Eu3+x系列样品在380 nm紫外光激发下的色坐标,当Na+和Eu3+的掺杂量x=0.15时,样品的红色显色最强.     

LD泵浦的新型全固态Yb:YAB激光器光学特性的计算

对一种新型自倍频激光晶体Yb：YAB的能级结构和光谱特性作了分析,利用准三能级的耦合速率方程,得出了LD端面泵浦条件下激光输出的解析表达式。讨论了晶体温度,晶体的有效光学长度,以及输出镜的反射率等因素对激光输出强度和发光阈值的影响。从理论上对LD端面泵浦的新型全固态Yb：YAB激光器的光学特性进行了系统的计算和分析。     

Luminescence investigation of Eu~(3+)-Bi~(3+) co-doped CaMoO_4 phosphor

A series of Eu3+-Bi3+ co-doped CaMoO4 red phosphors were synthesized via the solid-sate reaction method. The crystal structures of the obtained samples were identified by X-ray powder diffraction (XRD). The photoluminescence property was investigated, and the results showed that the intensity of excitation spectra and emission spectra could be changed with different doping ratios of Bi3+/Eu3+. The proposed explanation of these changes was from the energy transfer between Bi3+ and Eu3+ and the unbalanced cha...     

Luminescence investigation of Eu~（3＋）-Bi~（3＋） co-doped CaMoO_4 phosphor

A series of Eu³⁺-Bi³⁺ co-doped CaMoO₄ red phosphors were synthesized via the solid-sate reaction method. The crystal structures of the obtained samples were identified by X-ray powder diffraction (XRD). The photoluminescence property was investigated, and the results showed that the intensity of excitation spectra and emission spectra could be changed with different doping ratios of Bi³⁺/Eu³⁺. The proposed explanation of these changes was from the energy transfer between Bi³⁺ and Eu³⁺ and the unbalanced charge from the substitution of Eu³⁺ and Bi³⁺ for Ca²⁺ in CaMoO₄. The obtained samples are a promising red light emitting phosphor for the needs of different excitation sources with near-UV and blue GaN-based chips.