Efficient Design of Bi-circular Patch Antenna for 5G Communication with Mathematical Calculations for Resonant Frequencies

Wireless Personal Communications - In this paper the conventional circular patch has been reshaped by two circular arcs with the FR4 Epoxy material for substrate. This is supported by the...     

Sintering studies of nano-crystalline zinc oxide

Sintering and grain growth of nano-crystalline undoped ZnO has been studied in detail over a wide range of temperature and holding time. Below 800 °C, sintering of over 70% theoretical density is not observed, irrespective of particle size. At 900 °C for 6 h, the nano-crystalline sample sinters to 99% of theoretical density whereas the density for as received sample is 93% of theoretical density. However, at 1300 °C or higher, the densification is found to be much faster and after a few hours becomes independent of holding time. Grain growth studies reveal a similar feature of attaining saturation over holding time. The average saturated grain size is found to be ∼1.5 and ∼2.2 μm at 800 and 900 °C, respectively, while at 1300 °C or higher, it is in between 12 and 13 μm.     

Bayes estimators for reliability measures in geometric distribution model using masked system life test data

This paper presents Bayes estimators for the reliability measures of the individual components in a multi-component systems in the presence of masked system life test data. The life time distributions of the system components are assumed to be geometric with different parameters. Two-sided Bayesian probability intervals of the parameters are also derived. Numerical simulation study is given in order to: (i) explain how one can apply the theoretical results obtained, (ii) study the influence of the sample size and masking level on the accuracy of point estimates.     

Characterization of Nanocrystalline Bismuth Telluride (Bi2Te3) Synthesized by a Novel Approach Through Aqueous Precursor Method

Bi₂Te₃-based alloys are currently best-known, technologically important thermoelectric materials near room temperature. In this paper, nanocrystalline Bi₂Te₃ was synthesized by an aqueous solution technique based on the reaction between the aqueous solution of Bi-ethylenediamine tetraaceticacid (EDTA), TeO-EDTA, and NaBH₄ at room temperature. NaBH₄ was used as a reducing agent. TeO-EDTA was prepared from TeO₂ after satisfactory purification. The sample purity was examined by selected area energy dispersive X-ray analysis. The products were characterized by X-ray diffraction and high-resolution transmission electron microscopy by which the particle morphologies and size were studied. The particle size ranges from 60 to 90 nm.     

A parametric study of strength reduction factors for elasto-plastic oscillators

Strength reduction factors (SRFs) continue to play a key role in obtaining design forces from elastic design spectra (via response modification factors) in ductility-based earthquake-resistant design. Despite several years of sustained research efforts, it has not been conclusively shown how SRF for a given singledegree-of-freedom structural system depends on various source and site parameters. A parametric study is carried out here for the explicit dependence of SRF spectrum (describing variation of SRF with system period for a given ductility demand) on strong motion duration, earthquake magnitude, geological site conditions, and epicentral distance in case of (non-degrading) elasto-plastic oscillators. For this, scaled response spectra are considered for different combinations of earthquake magnitude, site conditions and epicentral distance, and SRF spectra are generated from 1274 accelerograms recorded in western USA after making those compatible with each of these spectra. It is shown that there is no clear and significant dependence of SRF spectrum on strong motion duration. Further, the parametric dependence on earthquake magnitude, site conditions, and epicentral distance broadly conforms to the trends reported by earlier investigations. In particular, this study confirms that the dependence of SRF spectra on earthquake magnitude should not be ignored. This paper has been contributed in honour of Professor R N Iyengar, Indian Institute of Science, on the occasion of his formal retirement.     

Analysing the patterns of spatial contrast discontinuities in natural images for robust edge detection

Pattern Analysis and Applications - The pattern of spatial contrast discontinuities in natural images has been analysed in the present work, and based on it, a new adaptive model of the...     

Prediction and optimization of electroplated Ni-based coating composition and thickness using central composite design and artificial neural network

Journal of Applied Electrochemistry - The choice of the electroplating conditions of Ni-based alloys has always been a serious research question. In this study, an artificial neural network based...     

Bayesian inference and prediction of the inverse Weibull distribution for Type-II censored data

This paper describes the Bayesian inference and prediction of the inverse Weibull distribution for Type-II censored data. First we consider the Bayesian inference of the unknown parameter under a squared error loss function. Although we have discussed mainly the squared error loss function, any other loss function can easily be considered. A Gibbs sampling procedure is used to draw Markov Chain Monte Carlo (MCMC) samples, and they have in turn, been used to compute the Bayes estimates and also to construct the corresponding credible intervals with the help of an importance sampling technique. We have performed a simulation study in order to compare the proposed Bayes estimators with the maximum likelihood estimators. We further consider one-sample and two-sample Bayes prediction problems based on the observed sample and provide appropriate predictive intervals with a given coverage probability. A real life data set is used to illustrate the results derived. Some open problems are indicated for further research.     

Genetic algorithms based robust frequency estimation of sinusoidal signals with stationary errors

In this paper, we consider the fundamental problem of frequency estimation of multiple sinusoidal signals with stationary errors. We propose genetic algorithm and outlier-insensitive criterion function based technique for the frequency estimation problem. In the simulation studies and real life data analysis, it is observed that the proposed genetic algorithm based robust frequency estimators are able to resolve frequencies of the sinusoidal model with high degree of accuracy. Among the proposed methods, the genetic algorithm based least squares estimator, in the no-outlier scenario, provides efficient estimates, in the sense that their mean square errors attain the corresponding Cramér-Rao lower bounds. In the presence of outliers, the proposed robust methods perform quite well and seem to have a fairly high breakdown point with respect to level of outlier contamination. The proposed methods significantly do not depend on the initial guess values required for other iterative frequency estimation methods.     

33.7 MHz heavy-ion radio frequency quadrupole linac at VECC Kolkata

A 33.7 MHz heavy-ion radio frequency quadrupole (RFQ) linear accelerator has been designed, built, and tested. It is a four-rod-type RFQ designed for acceleration of 1.38 keVu, qA> or =116 ions to about 29 keVu. Transmission efficiencies of about 85% and 80% have been measured for the unanalyzed and analyzed beams, respectively, of oxygen ((16)O(2+), (16)O(3+), (16)O(4+)), nitrogen ((14)N(3+), (14)N(4+)), and argon ((40)Ar(4+)). The system design and measurements along with results of beam acceleration test will be presented.