Catalytic reduction of 2,4‐dinitrophenylhydrazine by cuttlebone supported Pd NPs prepared using Conium maculatum leaf extract

A facile and green process to synthesise cuttlebone supported palladium nanoparticles (Pd NPs/cuttlebone) is reported using Conium maculatum leaf extract and in the absence of chemical solvents and hazardous materials. The antioxidant content of the C. maculatum leaf extract played a significant role in converting Pd²⁺ ions to Pd NPs. Various techniques were used for the characterisation of the Pd NPs/cuttlebone such as field‐emission scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, Fourier transform infrared and ultraviolet–visible spectroscopy. This Pd NPs/cuttlebone showed excellent catalytic activity in the reduction of 2,4‐dinitrophenylhydrazine to 2,4‐diaminophenylhydrazine by sodium borohydride as the source of hydrogen at ambient condition. The catalyst could be separated and recycled up to five cycles with no loss of its activity.Inspec keywords: catalysis, catalysts, chemical engineering, palladium, nanoparticles, field emission electron microscopy, scanning electron microscopy, X‐ray diffraction, X‐ray chemical analysis, sodium compounds, ultraviolet spectroscopy, visible spectroscopyOther keywords: catalytic reduction, 2,4‐dinitrophenylhydrazine, cuttlebone, Conium maculatum leaf extract, green process, palladium nanoparticles, antioxidant content, field‐emission scanning electron microscopy, X‐ray diffraction, energy dispersive X‐ray spectroscopy, Fourier transform infrared, ultraviolet–visible spectroscopy, 2,4‐diaminophenylhydrazine, sodium borohydride     

Analytical layerwise free vibration analysis of circular/annular composite sandwich plates with auxetic cores

In the present research, free vibration of circular and annular sandwich plates with auxetic (negative Poisson’s ratio) cores and isotropic/orthotropic face sheets is investigated for different combinations of the boundary conditions. To ensure that the results are accurate and reliable, a global–local layerwise plate theory is employed instead of the traditional equivalent single-layer theories. The governing equations are derived based on Hamilton’s principle and solved using a Taylor transform whose center is located at the outer radius of the plate. Due to this hint, the resulting semi-analytical solution can be employed for both circular and annular sandwich plates. After investigation of vibration behavior of a single-layer annular auxetic plate, a comprehensive parametric study including evaluation of effects of the auxeticity for sandwich plates with isotropic and orthotropic face sheets, symmetric and asymmetric layups, different core to sheet thickness, radius to thickness, and inner to outer radius ratios, and various boundary conditions, is carried out. Results show that unlike the single-layer auxetic plates that exhibit a transition state, the auxeticity may considerably increase the natural frequencies and rigidities of the circular/annular sandwich plates, especially when the boundary conditions induce higher rigidity in the plate or when the fibers are along the radial direction. Accuracy of results of the employed layerwise theory and the proposed semi-analytical solution is verified by comparing the results with those of the three-dimensional theory of elasticity extracted from the ABAQUS software.     

Residual generation with unknown input observer for linear systems in the presence of unmatched uncertainties

Journal of Mechanical Science and Technology - In this paper, we deal with residual vector generation for fault detection problems in linear systems via unknown input observer (UIO) when the...     

Hydrothermal synthesis of Co3O4 nanosheets and its application in photoelectrochemical water splitting

In this study, Co₃O₄ nanosheets were synthesized through hydrothermal method using cobalt nitrate hexahydrate. X-ray diffraction, diffuse reflectance spectra, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and field emission scanning electron microscopy were applied to investigate the properties of as-synthesized samples. Ultimately, the electrochemical and photoelectrochemical properties were evaluated by Mott–Schottky analysis and measuring photoconversion efficiency of Co₃O₄ nanosheets. The results indicated that Co₃O₄ nanosheets exhibited a maximum efficiency of 0.92% for water electrolysis under simulated 1.5 global sunlight air mass, which further suggests the excellent potential of Co₃O₄ nanosheets for application in hydrogen generation through photocatalytic water splitting.     

Numerical analysis of the nonlinear performance of concentrically braced frames under cyclic loading

Concentrically braced frames (CBFs) are widely used as lateral-load resisting system in steel structures. This study examines the effects of different parameters especially those associated with connections, on the behavior of CBFs. A single bay, singlestory frame is used to evaluate the interaction between structural members. Nonlinear analyses using a detailed inelastic finiteelement model (FEM) are carried out to study the behavior of frames subjected to cyclic loading. Models are designed based on seismic codes and analyzed to evaluate the performance of both SCBFs and OCBFs. The equivalent plastic strain concept is used to determine the ductility capacity and to predict fracture and failure in these models. Results show that the seismic performance of CBFs, which are designed according to current provisions can be improved by configuring the details of gusset plate connections in a way that inelastic demands are balanced in middle of brace and gusset plate corners.     

Viscoelastic behavior of epoxy/carbon fiber/Zno nano‐rods hybrid composites

The insufficient viscoelastic resistance of fiber reinforced plastics can be retrofitted by the addition of more rigid nano fillers to the polymer matrix. In this study, carbon fibers plies were grafted with zinc oxide (ZnO) nano‐rods and the hybridized reinforcement was utilized in laminated composites. Flexural creep tests were carried out using dynamic mechanical analysis (DMA) and the time/temperature superposition principle was employed for accelerated testing. To verify the applicability of TTPS, prolonged stress relaxation tests were also carried out in flexural mode. Data from the DMA flexural creep tests revealed that the whiskerization of carbon fibers with ZnO nano rods reduced the creep compliance by 23% at elevated temperatures and prolonged durations. Also, the relaxation data confirmed the applicability of TTPS to these hybrid composites. The stress relaxation modulus improved by 65% in comparison to composites based on neat carbon fibers. POLYM. COMPOS., 36:1967–1972, 2015. © 2014 Society of Plastics Engineer     

Effect of carbon steel microstructures and molecular structure of two new Schiff base compounds on inhibition performance in 1 M HCl solution by EIS

In this investigation, attempts have been made to study the inhibitive effect of N,N′-ortho-phenylen acetyle acetone imine (S1) and 4-[(3-{[1-(2-hydroxy phenyl) methylidene] amino} propyl] ethanemidol]-1,3-benzenediol (S2) in the concentration range of 50–400 ppm for mild steel with two different microstructures resulted from two different heat treatments (annealed (A) and quenched and tempered (Q&T)) in 1 M hydrochloric acid by ac impedance spectroscopy. The tests were conducted in acid solutions in the absence and presence of different concentrations of S1 and S2 Schiff bases for both microstructures. A sole time constant was observed from Bode-phase angle plots in the presence of inhibitors which reveals that the action of inhibitors is through adsorption on the surface. The charge transfer resistance and inhibition efficiency increases with the increase in Schiff bases concentration for both microstructures. The perlite samples in the absence of inhibitors in 1 M hydrochloric acid indicated slightly less corrosion than martensite ones, which was because of more protective oxide layers. Furthermore in the presence of S1 and S2, these samples showed better adsorption than martensite one. Schiff base S1 showed a better inhibition against corrosion in comparison with S2. Both S1 and S2 adsorbed on steel surface according to a Langmuir adsorption isotherm model. The associated Gibbs free energies for S1 on both microstructures are more than S2.     

Albumin adsorption on Cibacron Blue F3G-A immobilized onto oligo(ethylene glycol)-terminated self-assembled monolayers

Self-assembled monolayers can be tailored with specific ligands to a certain protein and at the same time prevent the non-specific adsorption of other proteins. Cibacron Blue F3G-A (CB-thiol) was successfully immobilized onto tetra(ethylene glycol)-terminated alkanethiol (CB-thiol). The affinity of human serum albumin (HSA) to immobilized Cibacron Blue F3G-A was studied using mixed thiolate self-assembled monolayers on gold with different n-alkyl chain lengths and functional terminal groups (CH₃-; OH- and tetra(ethylene glycol)). Surfaces were characterized using X-ray photoelectron spectroscopy and water contact angle measurements. Albumin adsorption and exchangeability of the adsorbed albumin molecules with other albumin molecules in solution were evaluated using ¹²⁵I-radiolabeled HSA. Competitive adsorption between albumin and fibrinogen to the different self-assembled monolayers (SAMs) was also investigated. Results showed that the incorporation of CB-thiol on the monolayers does not increase the HSA adsorption and reversibility on the SAMs. However, although specific adsorption of HSA to the immobilized Cibacron Blue F3G-A was not demonstrated, the presence of CB-thiol decreases the affinity of fibrinogen to the OH-terminated SAMs.     

Lake Urmia restoration success story: A natural trend or a planned remedy?

Lake Urmia is the second-largest hypersaline lake in the world. There has been a drastic water level drop of 7.2 m from 1995 to 2016. Beginning in October 2013, the Lake Urmia Restoration Plan (LURP) launched a 10-year program. An increase in water level and a relative improvement in Lake Urmia condition has been observed since 2017. It is an undecided and controversial issue whether the recent positive trend of Lake Urmia has been due to the LURP activities or it is a natural contribution of climate factors variations. To shed some light on this issue, we examine three other lakes, adjacent to the Lake Urmia basin, with similar rainfall variability to investigate their status during the same period. Van (Turkey), Mosul, and Tharthar (both in Iraq), are evaluated as well as Lake Urmia. Three decades of remotely sensed data including precipitation ($P$), water level ($\mathit{WL}$), and lake extent ($A$) were considered for the mentioned lakes. A significant correlation was observed between standardized $\mathit{WL}-P$, and $A-P$ over the long-term period, especially for the recent three years ($R$² = 0.63–0.87). We show that the cumulative precipitation in the antecedent months played a major role in the improvement of these lakes' situation but with different time lags (up to 6 months for Van and Mosul lakes and up to 36 months for Lake Urmia and Tharthar lake). These findings could inform the planners of LURP to adopt strategies for achieving a sustainable state of Lake Urmia based on a more realistic outlook.