Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Visual evaluation at scale of threshold to suprathreshold color difference

Visual evaluation experiments of color discrimination threshold and suprathreshold color‐difference comparison were carried out using CRT colors based on the psychophysical methods of interleaved staircase and constant stimuli, respectively. A large set of experimental data was generated ranged from threshold to large suprathreshold color difference at the five CIE color centers. The visual data were analyzed in detail for every observer at each visual scale to show the effect of color‐difference magnitude on the observer precision. The chromaticity ellipses from this study were compared with four previous published data, of CRT colors by Cui and Luo, and of surface colors by RIT‐DuPont, Cheung and Rigg, and Guan and Luo, to report the reproducibility of this kind of experiment using CRT colors and the variations between CRT and surface data, respectively. The present threshold data were also compared against the different suprathreshold data to show the effect of color‐difference scales. The visual results were further used to test the three advance color‐difference formulae, CMC, CIE94, and CIEDE2000, together with the basic CIELAB equation. In their original forms or with optimized K_L values, the CIEDE2000 outperformed others, followed by CMC, and with the CIELAB and CIE94 the poorest for predicting the combined dataset of all color centers in the present study. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 198–208, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20106     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

Hydrothermal Formation of Hydroxyapatite Layers on the Surface of Type-A Zeolite

Type-A zeolite evenly covered with hydroxyapatite thin layers was prepared using hydrothermal treatment at 120°C for 8 h under autogenous pressure. The hydroxyapatite needlelike nanocrystals, 100–200 nm in diameter and 30 nm in thickness, were grown under the reaction between discharged Ca²⁺ ions from type-A zeolite and PO₄³⁻ ions in (NH₄)₃PO₄ solution. The preferential orientations of the c -axis of hydroxyapatite crystals perpendicular to a zeolite surface were observed using transmission electron microscopy. The crystal structure of type-A zeolite was not destroyed under the reaction, but the surface morphology was changed only with complete covering of scaly hydroxyapatite particles.     

Ion-beam processing of single crystal diamond using SOG mask

Various ion-beam etching characteristics of diamond and selectivity between diamond and spin-on-glass (SOG) were examined. The maximum selectivity of diamond and SOG was 12.7 in oxygen reactive ion-beam etching process at 100 V acceleration voltage. Using this etching condition and dot-shaped SOG mask, conical diamond field electron emitter arrays with 30 nm curvature radius, 2.58 μm base radius and 5.86 μm height were fabricated.     

Comparison of isolation methods using commercially available kits for obtaining extracellular vesicles from cow milk

Extracellular vesicles (EV) are important for delivering biologically active substances to facilitate cell-to-cell communication. Milk-derived EV are widely known because of their potential for immune enhancement. However, procedures for isolating milk-derived EV have not been fully established. To obtain pure milk-derived EV and accurately reveal their function, such procedures must be established. The aim of the present study was to compare methods using commercially available kits for isolating milk-derived EV. Initially, we investigated procedures to remove casein, which is the major obstacle in determining milk-derived EV purity. We separated whey using centrifugation only, acetic acid precipitation, and EDTA precipitation. Then, we isolated milk-derived EV by ultracentrifugation, membrane affinity column, size exclusion chromatography (SEC), polymer-based isolation, or phosphatidylserine-affinity isolation. Using EV count per milligram of protein, which is a good indicator of purity, we determined that acetic acid precipitation was the best method for removing casein. Using nanoparticle tracking analysis, protein quantity analysis, and RNA quantity analysis, we comprehensively compared each isolation method for its purity and yield. We found that SEC-based qEV column (Izon Science) could collect purer milk-derived EV at higher quantities. Thus, a combination of acetic acid precipitation and qEV can effectively isolate high amounts of pure extracellular vesicles from bovine milk.     

Optimal charging strategy for a residential PEV battery considering bidirectional trade and frequency regulation

International Journal of Control, Automation and Systems - A practical charging strategy for an individual plug-in electric vehicle (PEV) is proposed. A cost function is constructed to reflect...     

Conductive and flexible multi-walled carbon nanotube/polydimethylsiloxane composites made with naphthalene/toluene mixture

Conventional conductive materials face challenges when utilizing them for flexible and wearable electronics and soft robotics. Carbon nanotube/polydimethylsiloxane (CNT/PDMS) composites are a promising alternative to the conventional hard conductors because they are light and can realize large deformation. To date, well dispersion of CNTs into PDMS to increase conductivity while maintaining flexibility remains challenging. We aimed at developing highly electrically conductive and flexible multi-walled carbon nanotube/PDMS (MWCNT/PDMS) composites. To this end, we proposed a method to enhance the dispersion of MWCNTs into PDMS using naphthalene and toluene. Our results showed that the addition of naphthalene and toluene into the composites improved dispersion of the MWCNTs and increased the direct current (DC) electrical conductivity. We also found that the morphology of primary aggregates of the MWCNTs influenced the DC electrical conductivity of the composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48167.     

Development of an image evaluation method for skin color distribution in facial images and its application: Aging effects and seasonal changes of facial color distribution

In this article, we present an evaluation method for the skin color distribution in the face area. Unlike previous methods that extract a specific area, our method subdivides the entire face into small regions and analyzes detailed, per-frame textures. Our evaluation method for skin color distribution is based on facial feature points and includes segmentation that takes into account the facial skeleton and muscle orientation. The use of facial feature points enables a comparison at relatively equal positions on the face without depending on the shape or size of the individual's face. Our evaluation method is versatile, and as an application, we clarified age-specific features and seasonal variations of facial color distribution. As a result of applying this evaluation method to the facial images of women aged 20 to 78 years, we confirmed that the lightness of the face decreased as age increased. In particular, the decrease in lightness was remarkable in the region along the cheekbone, from the temple to the center of the cheek. Furthermore, we analyzed the seasonal changes of melanin distribution in the face area. This showed that the melanin index increased particularly in the cheekbone area in the summer when the influence of ultraviolet rays became large. Our novel methodology and the data presented in this article will be useful in various fields, such as dermatology, cosmetics, and computer vision.     

Detection of relative and uniform motion

We measured the lowest velocity (velocity threshold) for discriminating motion direction in relative and uniform motion stimuli, varying the contrast and the spatial frequency of the stimulus gratings. The results showed significant differences in the effects of contrast and spatial frequency on the threshold, as well as on the absolute threshold level between the two motion conditions, except when the contrast was 1% or lower. Little effect of spatial frequency was found for uniform motion, whereas a bandpass property with a peak at approximately 5 cycles per degree was found for relative motion. It was also found that contrast had little effect on uniform motion, whereas the threshold decreased with increases in contrast up to 85% for relative motion. These differences cannot be attributed to possible differences in eye movements between the relative and the uniform motion conditions, because the spatial-frequency characteristics differed in the two conditions even when the presentation duration was short enough to prevent eye movements. The differences also cannot be attributed to detecting positional changes, because the velocity threshold was not determined by the total distance of the stimulus movements. These results suggest that there are two different motion pathways: one that specializes in relative motion and one that specializes in uniform or global motion. A simulation showed that the difference in the response functions of the two possible pathways accounts for the differences in the spatial-frequency and contrast dependency of the velocity threshold.