Psychological potential field and human eye fixation on binary line-drawing images: A comparative experimental study

Computational Visual Media - Quantitatively evaluating the psychological and perceptual effects of objects is an important issue, but is difficult. In cognitive studies, the psychological potential...     

Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Spray-dry synthesis of β-Cu1.8Zn0.2V2O7 ceramic fine particles showing giant negative thermal expansion

We used spray-dry method to synthesize fine powder of β-Cu_1.8Zn_0.2V₂O₇ showing large negative thermal expansion (NTE) linearly to temperature over a wide temperature range. The NTE of β-Cu_1.8Zn_0.2V₂O₇ is produced by microstructures consisting of voids and anisotropic thermal deformation of crystal grains in ceramics. By reducing the size of the microstructures that produce NTE, large NTE equivalent to that of bulk was realized, even for ceramic particles of about 2 μm size. Comparison with particles produced using a conventional method demonstrates that the particle size distribution is narrow and that the particles are nearly spherical. This achievement is expected to pave the way to use of NTE materials in micrometer-scale control of thermal expansion.     

Development of an image evaluation method for skin color distribution in facial images and its application: Aging effects and seasonal changes of facial color distribution

In this article, we present an evaluation method for the skin color distribution in the face area. Unlike previous methods that extract a specific area, our method subdivides the entire face into small regions and analyzes detailed, per-frame textures. Our evaluation method for skin color distribution is based on facial feature points and includes segmentation that takes into account the facial skeleton and muscle orientation. The use of facial feature points enables a comparison at relatively equal positions on the face without depending on the shape or size of the individual's face. Our evaluation method is versatile, and as an application, we clarified age-specific features and seasonal variations of facial color distribution. As a result of applying this evaluation method to the facial images of women aged 20 to 78 years, we confirmed that the lightness of the face decreased as age increased. In particular, the decrease in lightness was remarkable in the region along the cheekbone, from the temple to the center of the cheek. Furthermore, we analyzed the seasonal changes of melanin distribution in the face area. This showed that the melanin index increased particularly in the cheekbone area in the summer when the influence of ultraviolet rays became large. Our novel methodology and the data presented in this article will be useful in various fields, such as dermatology, cosmetics, and computer vision.     

Microstructures of InN film on 4H-SiC (0001) substrate grown by RF-MBE

InN film was grown on 4H-SiC (0001) substrate by RF plasma-assisted molecular beam epitaxy (RF-MBE). Prior to the growth of InN film, an InN buffer layer with a thickness of ~ 5.5 nm was grown on the substrate. Surface morphology, microstructure and structural quality of InN film were investigated. Micro-structural defects, such as stacking faults and anti-phase domain in InN film were carefully investigated using transmission electron microscopy (TEM). The results show that a high density of line contrasts, parallel to the growth direction (c-axis), was clearly observed in the grown InN film. Dark field TEM images recorded with diffraction vectors g = 1120 and g = 0002 revealed that such line contrasts evolved from a coalescence of the adjacent misoriented islands during the initial stage of the InN nucleation on the substrate surface. This InN nucleation also led to a generation of anti-phase domains.     

Characteristics of fluoride adsorption onto aluminium(III) and iron(III) hydroxide flocs

The fluoride adsorption onto the hydroxide flocs of Al(III), Fe(III), or a mixture of the two was studied. The optimum pH was influenced by the flocs’ solubility and surface charge. Although the Al(III) hydroxide flocs had a maximum adsorption capacity at the equilibrium concentration of 8 mg-F/L, the two-stage adsorption process revealed that the mixture of the Al(III) and Fe(III) hydroxide flocs required the smallest adsorbent dose as the concentration changed from 40 to 8 mg-F/L. Thus, the simultaneous dosing of Al(III) and Fe(III) combined with a two-stage adsorption process appears to be an effective option for fluoride removal.     

Development of function-graded proton exchange membrane for PEFC using heavy ion beam irradiation

The graded energy deposition of heavy ion beam irradiation to polymeric materials was utilized to synthesize a novel proton exchange membrane (PEM) with the graded density of sulfonic acid groups toward the thickness direction. Stacked Poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) films were irradiated by Xe⁵⁴⁺ ion beam with the energy of 6 MeV/u under a vacuum condition. The induced trapped radicals by the irradiation were measured by electron spin resonance (ESR) spectroscopy. Irradiated films were grafted with styrene monomer and then sulfonated. X-ray photo-electron spectroscopy (XPS) spectra showed that the densities of sulfonic acid groups were controlled for injection “Surface” and transmit “Back” sides of the fabricated PEM. The membrane electrode assembly (MEA) fabricated by the function-graded PEM showed improved fuel cell performance in terms of voltage stability. It was expected that the function-graded PEM could control the graded concentration of sulfonic acid groups in PEM.     

Effects of Ozone-Gas Bubble Size and pH on Ozone/UV Treatment

A series of ozone/UV treatment under injection of ozone with different ozone-gas bubble sizes was performed at pH 1.7 and 7.4. The increase in the bubble size and the decrease in pH enhanced the ozone utilization efficiency. The enhancement of ozone utilization efficiency was caused by the shift of the production pathway of hydroxyl radical (OH) from the OH production via O₃ ^– to the UV photolysis of H₂O₂. The lower pH caused this shift through the chemical equilibrium of H₂O₂ and HO₂ ^–, and the large bubbles caused this shift through the augmentation of H₂O₂ transport from the bubble surface to the bulk solution.     

Nickel‐Catalyzed Suzuki–Miyaura Coupling of a Tertiary Iodocyclopropane with Wide Boronic Acid Substrate Scope: Coupling Reaction Outcome Depends on Radical Species Stability

We describe a nickel‐catalyzed Suzuki–Miyaura arylation of a tertiary iodocyclopropane with arylboronic acids; this is an efficient and convergent strategy for providing various enantioenriched arylcyclopropanes with a quaternary stereogenic center. This is the first metal‐catalyzed coupling between a tertiary alkyl electrophile and a wide range of aromatics, including heteroaromatics. We found that the outcome of the Ni‐catalyzed coupling with halides as electrophiles was dependent on the stability of the radical species formed during the reaction. The use of tert‐butyl alcohol (t‐BuOH) as the reaction solvent was very effective, because of its stability under the radical‐generating reaction conditions.