Breast cancer and benign breast disease patients evaluated in relation to oxidative stress

The 'WHO Analgesic Ladder' is a well validated approach for the selection of appropriate analgesic therapy for cancer pain as well as pain in AIDS. The mainstay of analgesic intervention for cancer and AIDS pain of moderate to severe intensity continues to be the appropriate use of opioid analgesics. There is, however, a growing appreciation for the role of adjuvant analgesics, such as antidepressants and other psychotropic medications, at each step of the WHO Analgesic Ladder, particularly in the treatment of neuropathic pain. Knowledge of the indications and usefulness of psychotropic analgesic drugs in cancer and AIDS pain populations will be most important to clinicians practicing in psycho-oncology/AIDS settings, particularly since these drugs are useful not only in the treatment of psychiatric complications of cancer and AIDS, but also as adjuvant analgesic agents in the management of pain. This paper reviews the literature on the use of antidepressants, psychostimulants, neuroleptics, anticonvulsants and other psychotropic analgesics in the management of cancer and AIDS pain. Mechanisms of analgesia, drug selection, and recommendations for clinical usage are discussed. The appropriate and timely use of psychotropic adjuvant analgesic drugs represents an opportunity for active psychiatric contribution to the multidisciplinary management of cancer and AIDS pain.     

Use of ultrasonic energy in reactive dyeing of cellulosic fabrics

The use of ultrasonic energy in dyeing cotton fabrics with monochlorotriazine and vinylsulphone reactive dyes has been studied spectrophotometrically. The dyeings carried out conventionally and by the use of ultrasonic techniques were compared in terms of percentage exhaustion, total amount of dye transferred to the washing bath after dyeing, fastness properties and colour values of the dyed materials. Overall results have shown that the use of ultrasound in reactive dyeing of cellulosic fabrics can result in energy savings, less water consumption, increased depth of colour and better process conditions.     

Turbulence damping above the cloud height in suspensions of concentrated slurries in stirred tanks

Poor mixing in the clear liquid layer above the cloud height has been reported by several authors. This study uses LDV measurements to quantify turbulence above the cloud using a liquid level of 1.5 T to remove the barrier of a free surface at H = T. A D = T/3, down-pumping PBT was used at an off-bottom clearance of C = T/3. Three slurries were tested at impeller speeds 0.8, 1, and 1.2N_js. The change in turbulence was quantified using the normalized root mean square (RMS) of the fluctuating velocity summed and averaged over each radial traverse. A significant difference between the fluctuating values of the cloud height—minimum, average, and maximum—was observed. The turbulence decays until the maximum cloud height. Beyond that, it remains constant and near zero. The effects of both particle size and solids concentration prove to be important.     

Robust estimation in flat fading channels under bounded channel uncertainties

We investigate channel equalization problem for time-varying flat fading channels under bounded channel uncertainties. We analyze three robust methods to estimate an unknown signal transmitted through a time-varying flat fading channel. These methods are based on minimizing certain mean-square error criteria that incorporate the channel uncertainties into their problem formulations instead of directly using the inaccurate channel information that is available. We present closed-form solutions to the channel equalization problems for each method and for both zero mean and nonzero mean signals. We illustrate the performances of the equalization methods through simulations.     

Multi-sink load balanced forwarding with a multi-criteria fuzzy sink selection for video sensor networks

Congestion is a challenging problem in wireless sensor networks, which exacerbates with the high volume of data traffic imposed by video applications such as video surveillance and target tracking. Deployment of multiple sinks is a candidate solution for congestion and is also promising in terms of reliability and energy-efficiency. In order to gain the maximum benefit from multiple sinks, it is essential to distribute the load among them evenly. In this paper, we propose a cross layer geographic forwarding scheme MLBRF (Multi-Sink Load Balanced Reliable Forwarding) which aims to provide reliable and energy efficient video delivery in a multi-sinked sensor network for target tracking. In order to provide load balancing among the sinks, MLBRF proposes a sink selection mechanism based on fuzzy logic for the frame forwarding which evaluates the traffic density in the direction of each sink by combining two dynamic criteria which are the number of contenders and the buffer occupancy levels in the neighborhood with the static distance criterion. The performance of the fuzzy sink selection mechanism is compared using simulation with various sink selection mechanisms. The results show that MLBRF gains the maximum benefit from deploying multiple sinks in terms of reliability, latency and energy efficiency by using the proposed fuzzy sink selection mechanism.     

Photoinduced electron transfer mechanism between green fluorescent protein molecules and metal oxide nanoparticles

Green fluorescent protein (GFP) molecules are attached to titanium dioxide and cadmium oxide nanoparticles via sol–gel method and fluorescence dynamics of such a protein–metal oxide assembly is investigated with a conventional time correlated single photon counting technique. As compared to free fluorescent protein molecules, time-resolved experiments show that the fluorescence lifetime of GFP molecules bound to these metal oxide nanoparticles gets shortened dramatically. Such a decrease in the lifetime is measured to be 22 and 43 percent for cadmium oxide and titanium dioxide respectively, which is due to photoinduced electron transfer mechanism caused by the interaction of GFP molecules (donor) and metal oxide nanoparticles (acceptor). Our results yield electron transfer rates of 3.139×10⁸ s⁻¹ and 1.182×10⁸ s⁻¹ from the GFP molecules to titanium dioxide and cadmium oxide nanoparticles, respectively. The electron transfer rates show a marked decrease with increasing driving force energy. This effect represents a clear example of the Marcus inverted region electron transfer process.     

A Study on Glutaric Acid Extraction by Tridodecylamine: Equilibria and Models

The extraction of glutaric acid was studied using tridodecyl amine (TDA) with respect to the functional groups of the diluent. The diluents studied were 1‐octanol (alcohol), methyl isobuthyl ketone, MIBK (ketone), and toluene (aromatic hydrocarbon) and these were used to dilute the TDA. The experimental results of batch extraction experiments are reported as distribution coefficients, D_C, loading factors, Z, and extraction efficiency, E. All measurements were carried out at 298.15 K. The results of the liquid‐liquid equilibrium measurements are correlated by a linear solvation energy relationship (LSER) model that takes into account physical interactions and modified Freundlich and Langmuir equations. The experimental results are compared with model results.     

Template‐Based Synthesis of Aluminum Nitride Hollow Nanofibers Via Plasma‐Enhanced Atomic Layer Deposition

Aluminum nitride (AlN) hollow nanofibers were synthesized via plasma‐enhanced atomic layer deposition using sacrificial electrospun polymeric nanofiber templates having different average fiber diameters (~70, ~330, and ~740 nm). Depositions were carried out at 200°C using trimethylaluminum and ammonia precursors. AlN‐coated nanofibers were calcined subsequently at 500°C for 2 h to remove the sacrificial polymeric nanofiber template. SEM studies have shown that there is a critical wall thickness value depending on the template's average fiber diameter for AlN hollow nanofibers to preserve their shapes after the template has been removed by calcination. Best morphologies were observed for AlN hollow nanofibers prepared by depositing 800 cycles (corresponding to ~69 nm) on nanofiber templates having ~330 nm average fiber diameter. TEM images indicated uniform wall thicknesses of ~65 nm along the fiber axes for samples prepared using templates having ~70 and ~330 nm average fiber diameters. Synthesized AlN hollow nanofibers were polycrystalline with a hexagonal crystal structure as determined by high‐resolution TEM and selected area electron diffraction. Chemical compositions of coated and calcined samples were studied using X‐ray photoelectron spectroscopy (XPS). High‐resolution XPS spectra confirmed the presence of AlN.     

Effective factors improving catalyst layers of PEM fuel cell

Cathode catalyst layer has an important role on water management across the membrane electrode assembly (MEA). Effect of Pt percentage in commercial catalyst and Pt loading from the viewpoint of activity and water management on performance was investigated. Physical and electrochemical characteristics of conventional and hydrophobic catalyst layers were compared. Performance results revealed that power density of conventional catalyst layers (CLs) increased from 0.28 to 0.64 W/cm² at 0.45 V with the increase in Pt amount in commercial catalyst from 20% to 70% Pt/C for H₂/Air feed. In the case of H₂/O₂ feed, power density of CLs increased from 0.64 to 1.29 W/cm² at 0.45 V for conventional catalyst layers prepared with Tanaka. Increasing Pt load from 0.4 to 1.2 mg/cm², improved kinetic activity at low current density region in both feeding conditions. Scattering electron microscopy (SEM) images revealed that thickness of the catalyst layers (CLs) increases by increasing Pt load. Electrochemical impedance spectroscopy (EIS) results revealed that thinner CLs have lower charge transfer resistance than thicker CLs. Inclusion of 30 wt % Polytetrafluoroethylene (PTFE) nanoparticles in catalyst ink enhanced cell performance for the electrodes manufactured with 20% Pt/C at higher current densities. However, in the case of 70% Pt/C, performance enhancement was not observed. Cyclic voltammetry (CV) results revealed that 20% Pt/C had higher (77 m²/g) electrochemical surface area (ESA) than 70% Pt/C (65 m²/g). In terms of hydrophobic powders, ESA of 30PTFE prepared with 70% Pt/C was higher than 30PTFE prepared with 20 %Pt/C. X-Ray Diffractometer (XRD) results showed that diameter of Pt particles of 20% Pt/C was 2.5 nm, whereas, it was 3.5 nm for 70% Pt/C, which confirms CV results. Nitrogen physisorption results revealed that primary pores of hydrophobic catalyst powder prepared with 70% Pt/C was almost filled (99%) with Nafion and PTFE.