Globally stable and high-performance Internet congestion control through a computational inspiration from nature

There are many reasons to worry that the current congestion control schemes in the Internet may be reaching its limits. Since the nature is a source of excellent solutions for complex problems, this work attempts to solve the congestion control problem, by adopting some biological principles and mechanisms. The current work proposes that the congestion problem in the Internet can be addressed through an inspiration from the population control tactics in nature. Toward this idea, each flow (W ) in the networ...     

减少离散大系统两级镇定控制的保守性

The aim of this paper is to propose a new algorithm for multilevel stabilization of large scale systems. In two-level stabilization method, a set of local stabilizers for the individual subsystems in a completely decentralized environment is designed. The solution of the control problem involves designing of a global controller on a higher hierarchical level that provides corrective signals to account for interconnections effect. The principle feature of this paper is to reduce conservativeness in global controller design. Here, the key point is to reduce the effect of interactions instead of neutralizing them. In fact, unlike prior methods, our idea does not ignore the possible beneficial aspects of the interactions and does not try to neutralize them.     

Inhibition effect of a synthesized N, N＇-bis（2-hydroxybenzaldehyde）- 1, 3-propandiimine on corrosion of mild steel in HC1

The corrosion inhibition of mild steel in 1 mol/L HCl by N, N′-bis (2-hydroxybenzaldehyde)-1, 3-propandiimine (2-HBP) has been investigated by using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and chronoamperometry measurements. The experimental results suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. Polarization curves reveal that this organic compound is a mixed type inhibitor. The effect of temperature on the corrosion behavior of mild steel with the addition of the Schiff base was studied in the temperature range from 25℃ to 65℃. The experimentally obtained adsorption isotherms follow the Langmuir equation. Activation and thermodynamic adsorption parameters such as E a , ΔH, ΔS, K ads and ΔG ads were calculated by the corrosion currents at different temperatures and using the adsorption isotherm. The morphology of mild steel surface in the absence and presence of 2-HBP was examined by atomic force microscope (AFM) images.     

冷加工和时效处理顺序对6061铝合金力学性能的影响(英文)

研究不同的析出硬化和冷加工组合对6061铝合金拉伸性能的影响。结果表明,在不同的热处理过程中,在180℃单时效4h能提高合金的强度和伸长率。然而,双时效处理不能改善其力学性能。另外,预时效对随后的析出硬化有负面影响。合金力学性能的变化归因于析出硬化、应变硬化和加工软化的竞争而引起的显微组织演变。     

Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes

As many of the installed wind turbines (WTs) get older or approach their design life, there will be a drive to keep extending the lives of the main components especially the gearbox. The challenge of operations and maintenance will potentially be even more as there will be a need to keep the cost to a minimum. Similarly, as years of experience of operating WTs accumulate, knowledge about the behaviour and failure of subsystems is gained as well. Also with good documentation and repository of historical operational, performance and failure data, future decisions of operations and maintenance can be taken on the basis of insights from past experience. This paper presents an approach for implementing preventive maintenance (PM) by using historical failure data to determine the optimal PM interval required to maintain desired reliability of a typical module or subassembly. This paper builds upon previous research in the area of WT gearbox reliability analysis and prediction, taking it further by examining the relationships between the frequency of a PM task and the reliability, availability and maintenance costs. The approach presented demonstrates how historical in‐service failure data can be used in PM task selection based on the minimum maintenance cost and maximum availability. Available historical field failure data of the high speed module of a Vestas 2MW WT gearbox is used to validate the approach and show its practicality. The results of this study are then presented—indicating that choosing the right PM interval based on the minimum unit maintenance cost and maximum availability also improves WT gearbox reliability. Copyright © 2014 John Wiley & Sons, Ltd.     

Electrocatalytic and simultaneous determination of isoproterenol, uric acid and folic acid at molybdenum (VI) complex-carbon nanotube paste electrode

This paper describes the development, electrochemical characterization and utilization of a novel modified molybdenum (VI) complex-carbon nanotube paste electrode for the electrocatalytic determination of isoproterenol (IP). The electrochemical profile of the proposed modified electrode was analyzed by cyclic voltammetry (CV) that showed a shift of the oxidation peak potential of IP at 175 mV to less positive value, compared with an unmodified carbon paste electrode. Differential pulse voltammetry (DPV) in 0.1 M phosphate buffer solution (PBS) at pH 7.0 was performed to determine IP in the range from 0.7 to 600.0 μM, with a detection limit of 35.0 nM. Then the modified electrode was used to determine IP in an excess of uric acid (UA) and folic acid (FA) by DPV. Finally, this method was used for the determination of IP in some real samples.     

Theoretical and practical investigations of copper ion selective electrode with polymeric membrane based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone)

A novel ion-selective poly(vinyl chloride) (PVC) membrane sensor for Cu²⁺ ions based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone) (NDHA) as a new ionophore was prepared and studied. The best performance was observed for the membrane composition, including 30:65:1:4 (wt%) = PVC:DBP:KTpClPB:NDHA. The electrode showed a good Nernstian slope of 30.0 ± 0.5 mV/decade in a wide linear range activity of 3.0 × 10⁻⁷ to 1.0 × 10⁻² mol dm⁻³ Cu(NO₃)₂ with limit of detection 2.5 × 10⁻⁷. Sensor exhibited a fast response time (t_95% < 10 s) and could be used for about 4 months in the pH range of 3.0–7.4. The proposed potentiometric sensor was found to work satisfactorily in partially non-aqueous media up to 30 (vol%) content of methanol, ethanol and acetone. Applications of this electrode for the determination of copper in real samples, and as an indicator electrode for potentiometric titration of Cu²⁺ ion using EDTA, were reported. In order to predict the extraction ability of NDHA for different metallic ions, the complexes [M(NDHA)] and [M(H₂O)₆] (where M = Cu²⁺, Co²⁺, Hg²⁺, Pb²⁺, Ag⁺, Mg²⁺, Ca²⁺, Mn²⁺, Zn²⁺, Cd²⁺, K⁺ and Al³⁺) were investigated using ab initio theoretical calculations. The metal binding capability was evaluated using the binding energy. Results of our study could be useful for prediction of the extraction power of this Schiff base and could play a guiding role in planning experiments.     

Cleaning method of InSb [111] B of n-InSb [111] A/B for the growth of epitaxial layers by liquid phase epitaxy

The crystal structure of InSb[111]A/B surfaces shows that this structure is polarized.This means that the surfaces of InSb[111]A and InSb[111]B contain two different crystallized directions and they have different physical and chemical properties.Experiments were carried out on the InSb[111]A/B surfaces,showing that tartaric acid etchant could create a very smooth surface on the InSb[111]B without any traces of oxides and etch pit but simultaneously create etch pit on InSb[111]A surfaces.After lapping and polishing,some particles remained on the InSb[111]B surface,they could not be removed easily by standard cleaning process and if these particles remain on the surface of the substrate,the growth layer was not uniform and some island-like regions were observed.The purpose of this work is to remove these particles on the InSb[111]B surface.Some morphology images of both surfaces,InSb[111]A/B,will be presented.     

Microwave-assisted combustion synthesis of ZnAl2O4 and ZnO nanostructure particles for photocatalytic wastewater treatment

ZnAl₂O₄ and ZnO nanostructure particles and in situ crystallization of zinc aluminate and zinc oxide coating layers on sintered α-Al₂O₃ and γ-Al₂O₃ granules by the microwave-assisted combustion method were investigated. For powders, the effects of solution pH value and for coated samples the influence of support type on the structure, microstructure, and photocatalytic activity of powders were studied. Results showed that variation of synthesis pH value caused to considerable change in agglomeration, specific surface area, obtaining up to 88 and 92% yields for zinc aluminate and zinc oxide nanoparticles, respectively. γ-alumina granules were more appropriate supports than the α-alumina ones because of the better photocatalytic activities and lower extent of the attritions for both zinc aluminate and zinc oxide coating layers.     

Fe2MoO4 magnetic nanocomposite modified screen printed graphite electrode as a voltammetric sensor for simultaneous determination of nalbuphine and diclofenac

Journal of Materials Science: Materials in Electronics - This study applied screen printed graphite electrode (SPGE) modified with the Fe2MoO4 magnetic nanocomposite for simultaneously determining...