Synergistic Effects of Polybenzimidazole and Aramide on Enhancing Flame-Retardancy and Solubility

Aromatic and functional polymers with processibility derived from biobased starting materials are prerequisite considering sustainable society. Poly(2,5-benzimidazole)s are rigid-rod polymers to show ultrahigh thermal stability such as flame retardance, while usually suffer from poor solubility. Here, poly(benzimidazole-co-amide)s are synthesized from two biobased monomers, 3,4-diaminobenzoic acid and a semirigid comonomer, 4-aminohydrocinnamic acid. The copolymers with an amide composition of 80 mol% and higher are soluble in widely used polar solvents to fabricate the films keeping high flame retardance, which is comparable with popular high-performance polymers such as aromatic polyimides, polyetheretherketone, polyphenylene sulfide, etc.     

An efficient verifiable (t,n)-threshold secret image sharing scheme with ultralight shares

Multimedia Tools and Applications - A secret sharing scheme partitions a secret into a set of shares and distributes them among the eligible participants, with each participant receiving one share...     

Ergonomics in sickle operation

Sickle operation in harvesting has been analysed with reference to design features of nine different types of sickles, and field and laboratory based investigations on biomechanical stresses and physiological valuation on six farmers. It has been indicated that the blade geometry contributes significantly to human performance and there is ample scope for further design optimisation. The suggested modifications are: (i) sickle weight - 200 g; (ii) total length of sickle - 33 cm; (iii) handle length - 11 cm; (iv) handle diameter - 3 c cm; (v) radius of blade curvature - 15 cm; (vi) blade concavity - 5 cm; (vii) serrated sickle: tooth pitch - 0.20 cm and tooth angle - 60 degrees; (viii) ratio of the length of cutting surface to chord length - 1.20.     

An Experimental Investigation into the Effectiveness of OOA for Specifying Requirements

The application of object oriented concepts (OO) to the requirements phase of information systems (IS) and software development has been adopted by many proponents of IS and software development methodologies. Although many claims have been made about the effectiveness of OO techniques for improving requirements analysis, very few experimental studies have been done to substantiate these claims. This paper addresses this gap in the literature by conducting an experimental study that attempts to validate the effectiveness of object-oriented analysis (OOA) by comparing it to structured analysis (SA) for producing requirements. We argue that the quality of the requirements specification can be measured and that measurement can be used to compare the effectiveness of OOA and SA. We present an overview of the basic models and principles associated with OOA and SA, a discussion of quality in requirements definition, and a detailed discussion of the research methodology used. A review of relevant research is also presented and directions for further research are suggested. Our findings suggest that the OOA methodology does not necessarily produce better requirements statements.     

On the Role of C Addition on α Precipitation in a β Titanium Alloy

The onset of α nucleation in a carbon containing β-titanium alloy has been investigated by coupling atom probe tomography (APT) with transmission electron microscopy. The analysis of the APT results indicates that in addition to ω precipitates that can act as potential α nucleation sites, carbon atoms tend to form clusters within the β-matrix, which in turn give rise to additional nucleation sites for α, resulting in finer scale α precipitates due to increased nucleation density.     

Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium-molybdenum alloys

The ω phase is commonly observed in many commercial β or near-β titanium alloys on rapidly cooling from the single β phase field and also during subsequent isothermal annealing. However, the crystallographic formation mechanism for the ω particles is hitherto unclear/under discussion. The present study primarily focuses on ω precipitation within the β (body-centered cubic (bcc)) matrix of simple model binary titanium-molybdenum (Ti-Mo) alloys. It provides direct experimental evidence of the formation of ω-like embryos from competing compositional and structural instabilities arising in the bcc lattice of Ti-Mo alloys during rapid cooling from the high-temperature single β phase field. The displacive partial collapse of the {1 1 1} planes of the parent bcc structure within compositionally phase-separated regions containing several at.% less of Mo, forming ω-like embryos, has been conclusively shown by coupling aberration-corrected high-resolution scanning transmission electron microscopy with atom probe tomography observations. Growth and coarsening of these ω-like embryos take place during subsequent isothermal annealing, accompanied with both a completion of the collapse of the {1 1 1} β planes leading to a fully developed ω structure as well as rejection of Mo from these precipitates, resulting in near-equilibrium compositions.     

Effect of Heat Treatment, Pre-stress and Surface Hardening on Fracture Toughness of Micro-Alloyed Steel

Micro-alloyed steels are being increasingly accepted by industry in various fields of application and are available with a wide variety of microstructures. Extensive literature is available on their microstructure-property relationships. The superior mechanical properties of micro-alloyed steels are caused by fine-grained microstructures and precipitation of micro-alloying elements such as V, Ti and Nb that led to an improvement in yield strength, in the product of tensile strength and total elongation and in Charpy V-notch impact energy as well. The microstructural changes caused by heat treatment or residual stress state caused by surface hardening or mechanical means may influence the fracture toughness of these micro-alloyed steels. It is in this context that the present work begins with experimental determination of quasi-static initiation fracture toughness (J _1c) of low carbon (0.19%) micro-alloyed steel in as-rolled condition without any heat treatment. The study further explores the effect of normalizing, shot-peening and cyaniding followed by shot-peening on fracture toughness of as-rolled steel under study. The normalizing heat treatment, shot-peening and cyaniding followed by shot-peening—each indicates a positive influence on initiation fracture toughness. Results, when compared, show that cyaniding followed by shot-peening have led to a 2.7 times increase in J _1c. Cyaniding followed by shot-peening may therefore be considered as having the most positive influence on initiation fracture toughness in as-rolled condition for the type of micro-alloyed steel under study. Although initiation fracture toughness is in general known to decrease with increase in yield strength in LEFM arena, the micro-alloyed steel under study when normalized displayed simultaneous improvement in yield strength and J _1c. All these observed effects of normalizing, shot-peening and cyaniding on initiation fracture toughness (elastic-plastic fracture mechanics) were explained on the basis of microstructural study and stress depth profiles.     

Competing Martensitic,Bainitic, and Pearlitic Transformations in a Hypoeutectoid Ti-5Cu Alloy

This article discusses the competing mechanisms of martensite formation vs eutectoid decomposition via pearlitic or bainitic mechanisms during continuous cooling of a Ti-5 wt pct Cu hypoeutectoid alloy, which falls under the category of active eutectoid systems. Faster cooling rates result in a mixed microstructure of nanoscale bainite consisting of a far-from-equilibrium Ti₂Cu phase and martensitic alpha plates, as determined from three-dimensional atom probe (3DAP) coupled with energy-filtered transmission electron microscopy (EFTEM). Slower cooling resulted in near-equilibrium eutectoid-based microstructures.     

An experimental study of the effect of pin fins on heat transfer in circulating fluidized beds

An experimental investigation was conducted to study the effect of pin fins on heat transfer in circulating fluidized beds. Experiments were conducted in a 100 mm i.d., 5.15 m tall CFB unit, initially with no fins and then with 16-pin and 32-pin fins. Each pin was 6.35 mm in diameter and 15 mm long. It was observed that, although the heat transfer coefficient decreases with the use of fins, the total heat transfer increases owing to the increase in surface area which the fins provide. The results of heat transfer for unfinned surface were compared with those of other workers and found to be in good agreement.