Unravelling charge carrier dynamics in protonated g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> interfaced with carbon nanodots as co-catalysts toward enhanced photocatalytic CO<Subscript>2</Subscript> reduction: A combined experimental and first-principles DFT study

In this work,we demonstrated the successful construction of metal-free zerodimensional/two-dimensional carbon nanodot (CND)-hybridized protonated g-C3N4 (pCN) (CND/pCN) heterojunction photocatalysts by means of electrostatic attraction.We experimentally found that CNDs with an average diameter of 4.4 nm were uniformly distributed on the surface of pCN using electron microscopy analysis.The CND/pCN-3 sample with a CND content of 3 wt.％ showed the highest catalytic activity in the CO2 photoreduction process under visible and simulated solar light.Thisprocess results in the evolution of CH4 and CO.The total amounts of CH4 and CO generated by the CND/pCN-3 photocatalyst after 10 h of visible-light activity were found to be 29.23 and 58.82 μmol·gcatalyst-1,respectively.These values were 3.6 and 2.28 times higher,respectively,than the amounts generated when using pCN alone.The corresponding apparent quantum efficiency (AQE) was calculated to be 0.076％.Furthermore,the CND/pCN-3 sample demonstrated high stability and durability after four consecutive photoreaction cycles,with no significant decrease in the catalytic activity.The significant improvement in the photoactivity using CND/pCN-3 was attributed to the synergistic interaction between pCN and CNDs.This synergy allows the effective migration of photoexcited electrons from pCN to CNDs via wellcontacted heterojunction interfaces,which retards the charge recombination.This was confirmed by photoelectrochemical measurements,and steady-state and time-resolved photoluminescence analyses.The first-principles density functional theory (DFT) calculations were consistent with our experimental results,and showed that the work function of CNDs (5.56 eV) was larger than that of pCN (4.66 eV).This suggests that the efficient shuttling of electrons from the conduction band of pCN to CNDs hampers the recombination of electron-hole pairs.This significantly increased the probability of free charge carriers reducing CO2 to CH4 and CO.Overall,this study underlines the importance of understanding the charge carrier dynamics of the CND/pCN hybrid nanocomposites,in order to enhance solar energy conversion.     

A simple simultaneous geometric and intensity correction method for echo-planar imaging by EPI-based phase modulation

A technique, based on Echo planar imaging (EPI)-based phase modulation factor maps, is described for correction of EPI distortions resulting from field inhomogeneity. In this paper, a phase modulation factor was employed to remove the distortions. The phase modulation factor was obtained experimentally by collecting EPI images with a spin-echo (TE) spacing, deltaTE, equal to the inter-echo time interval, T(i). Then, the distortions resulting from the field inhomogeneity were removed by modulating the kappa-space data with the phase modulation factor. One of the advantages of this method is that it requires only a few extra scans to collect the information on field inhomogeneity. The proposed method does not require a phase unwrapping procedure for field inhomogeneity correction and, hence, is easier to implement, compared to other techniques. In addition, it corrects geometric distortion as well as intensity distortions simultaneously, which is robust to external noise or estimation error in severely distorted images. In this work, we also compared the proposed technique with others including, a) interpolation method with EPI-based displacement maps, and b) modulation method with phase modulation factor maps generated from spin-echo images. The results suggest the proposed technique is superior in correcting severely distorted images.     

Effects of Ar and O2 additives on photopatternable sol-gel etching in an SF6-based plasma for planar lightwave circuit fabrication

We present a novel study of the interaction of SF₆-based plasmas with sol-gel materials in a parallel plate reactive ion etching (RIE) system. The purpose of these experiments was to obtain quantitative measures and optimisation of the RIE parameters, which can be used in the microfabrication of planar lightwave circuit (PLC) devices. The sulfur hexafluoride chemistry is chosen due to its excellent etching properties of SiO₂, which is one of the components of the photopatternable sol-gel materials and is not present in typical photoresist materials. Fast process etching rate and good selectivity is achieved by varying SF₆ flow and power delivered to the electrodes. The study also reveals a marginal influence of oxygen and argon flow on the character of the sol-gel etching. The experimental data obtained can be used as a reference for any sol-gel devices fabricated using widely available RIE reactors.     

Structuring and Querying Documents in an Audio Database Management System

The growing digitization of multimedia content must be supported by a set of tools to manipulate them, and especially to query them. This is one of the major goals of an audio DBMS. Yet, existing work related to audio documents, e.g., radio or television archives, often leave the DBMS question open. In this paper, we lay the foundations for integrating audio into a general purpose DBMS, in the form of an audio abstract data type, along with its properties and associated operators. This contribution is coupled with an unsupervised statistically-founded speaker-based partitioning technique. For each of these two aspects, the paper underlines the practical interest and some technical difficulties. Also, some query examples introduce the problem of the complexity of the querying expressions as well as of time complexity.     

The investigation of structural and magnetic properties of Er2−xCoxO3 nano-oxides

Journal of Materials Science: Materials in Electronics - The sol–gel technique was used to synthesize Er2?xCoxO3 (0.0?≤?x?≤?0.30) mixed oxides to...     

Microstructure and High Temperature Impression Creep Properties of Mg–3Ca–xZr (x = 0.3, 0.6, 0.9 wt%) Alloys

The current study has investigated the influence of zirconium (Zr) addition to Mg–3Ca–xZr (x = 0.3, 0.6, 0.9 wt%) alloys prepared using argon arc melting on the microstructure and impression properties at 448–498 K under constant stress of 380 MPa. Microstructural analysis of as-cast Mg–3Ca–xZr alloys showed grain refinement with Zr addition. The observed grain refinement was attributed to the growth restriction effect of Zr in hypoperitectic Mg–3Ca–0.3 wt% Zr alloys. Heterogeneous nucleation of α-Mg in properitectic Zr during solidification resulted in grain refinement of hyperperitectic Mg–3Ca–0.6 wt% Zr and Mg–3Ca–0.9 wt% Zr alloys. The hardness of Mg–3Ca–xZr alloys increased as the amount of Zr increased due to grain refinement and solid solution strengthening of α-Mg by Zr. Creep resistance of Mg–3Ca–xZr alloys increased with the addition of Zr due to solid solution strengthening of α-Mg by Zr. The calculated activation energy (Q_a) for Mg–3Ca samples (131.49 kJ/mol) was the highest among all alloy compositions. The Q_a values for 0.3, 0.6 and 0.9 wt% Zr containing Mg–3Ca alloys were 107.22, 118.18 and 115.24 kJ/mol, respectively.     

Carotid-jugular arteriovenous fistula and cerebrovascular infarct: a case report of an iatrogenic complication following internal jugular vein catheterization

Central venous catheterization is frequently performed for perioperative management and long-term intravenous access. Although complications associated with central venous catheter insertion have been widely reported, there are few reports of carotid-jugular arteriovenous fistula formation. Endovascular procedures are associated with a risk of immediate and delayed thromboembolic and ischemic complications. We describe a case of a carotid-jugular arteriovenous fistula and a cerebrovascular infarct following the insertion of a double-lumen catheter for hemodialysis access. We provide recommendations for the prevention and the early detection of this iatrogenic complication.     

Combination of grey cotton fabric desizing and gassing treatments with a plasma aided process

In this study, corona plasma discharge was applied to desize polyvinyl alcohol (PVA) and starch on cotton fabrics. Plasma treated and non-treated samples were processed in various steps in a textile firm. The samples were tested to evaluate their weight loss, size dissolution, capillarity, dyeability, pilling resistance and strength values. The surface morphology and the chemical structures were examined by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analyses. The experimental results showed that the plasma has positive effects on size removal, hydrophility and the pilling values of the PVA and also starch sized fabrics.