Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Effects of surrounding brightness on visual search for safety colors

The present article reports the investigation of the effects of surrounding brightness on a visual search for three safety colors: red, orange, and yellow. Images of visual stimuli consisting of an array of colored circles placed on a large visual field (a visual angle of 40°) were displayed on an 80‐in. screen with a DLP projector. Experiment I examined the search efficiency under three levels of background luminance that were equivalent to the three target luminances. The results showed that the search efficiency for the orange target decreased as the number of distractors increased, under each of the background luminance levels, whereas the efficiency scarcely decreased for the red and yellow targets. Although a reduction in background luminance increased the search efficiency for the orange target, it is suggested that the effect of background luminance is smaller than the effect of the target color in search efficiency. Experiment II examined the search efficiency under three conditions of low levels of incident illuminance, which were matched with a linear regression to the luminance of color chips of safety colors measured twilight conditions. The results showed that the search efficiency for the orange target decreased as the number of distractors increased under each of the different illuminance conditions, whereas the efficiency scarcely decreased for red and yellow targets. Furthermore, as illuminance decreased, the search time for the orange target was more greatly impacted than for red or yellow. These results imply that the recognition of orange tends to be influenced by the surrounding brightness. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 400–409, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20152     

Age-related accumulation of phosphatidylcholine hydroperoxide in cultured human diploid cells and its prevention by α-tocopherol

The levels of phosphatidylcholine hydroperoxide in serially cultured human fetal diploid fibroblasts at various population doubling levels were determined by high-performance liquid chromatography combined with chemiluminescence detections. This methodology utilizes a mixture of cytochromec and luminol as post-column hydroperoxide group specific luminescent reagents. The cellular hydroperoxide content increased with age from 0.34 to 27.72 pmol/10⁶ cells. At the end of the cells'in vitro lifespan (51st population doubling level), the hydroperoxide content per 10⁶ cells reached about 80 times the level found in cells of the 20th population doubling level. Supplementation of exogenous α-tocopherol to the culture medium prevented hydroperoxide accumulation, but did not extent the lifespanin vitro. The results indicate that substantial intracellular phospholipid hydroperoxide accumulation occurred in the course of aging of human fetal liploid fibroblasts.     

Interfacial Reactions between Sapphire and Silver—Copper—Titanium Thin Film Filler Metal

Wetting and brazing studies of sputtering-deposited, submicrometer thin film filler metal in an Ag—Cu—Ti/Al₂O₃ system were performed. The interfacial reaction layer between the filler metal and Al₂O₃ was investigated. It is possible to make a brazing joint even with a reaction layer of less than 100 nm thickness. Different types of interfacial reaction layers were observed when the Ti content in the filler metal was varied. The Cu—Ti—O system compounds were observed in the samples with high wetting capabilities, but not in the sample with low wetting characteristics. It was found that these compounds are substances that promote effective brazing.     

Polymerization of methyl methacrylate by tri-n-butylborane in the presence of amino acid esters

The polymerization of methyl methacrylate by tri-n-butylborane in the presence of amino acid esters was investigated. The binary systems of tri-n-butylborane and amino esters were found to be more effective for initiating the polymerization than tri-n-butylborane alone. Co-catalytic effects of amino acid esters were in the order: tyrosinate > glutamate > aspartate ? phenyl alaninate > serinate > glycinate. The rate of polymerization in a mixture of dimethylsulphoxide and toluene was proportional to the square root of the concentration of the initiator system, to the monomer concentration, and to the concentration of dimethylsulphoxide in the solvent. The overall energy of activation was estimated to be 4.6 kcal/mol for the tri-n-butylborane/methyl tyrosinate system. Copolymerization curves gave a typical free-radical character.     

LC GRIN lens mode with wide viewing angle for rotatable 2D/3D tablet

To widen the vertical and horizontal angular ranges where the lens performs well, the off‐axis performance of a liquid crystal gradient index (LC GRIN) lens is analyzed by the combined simulation system of an LC director simulator and a ray‐tracing simulator. We found that the angular difference between an LC alignment direction and an electrode array direction of the LC GRIN lens is one of significant parameters, and detailed conditions of structure are established. The measurement result shows that the developed structure reduces the degradation ratio in a luminance profile from 61% to 3.2%. We have applied a user tracking system for the rotatable 3D display, equipped with a detection of a panel orientation and a face position. As a result, we have developed a rotatable 2D/3D tablet whose 3D viewing azimuth angle is over 30° in both landscape and portrait orientations.     

Utilizing endoscopic technology to reveal real-time proteomic alterations in response to chemoprevention

Cancer chemoprevention approaches use either pharmacological or dietary agents to impede, arrest or reverse the carcinogenic process. Although several agents have shown effectiveness against colon cancer, present intervention strategies provide only partial reduction. In this study, we utilized high-resolution endoscopy to obtain colon tumor biopsy specimens from Apc mutant mice before and after 2-wk sulindac intervention. To acquire information beyond genomics, proteome analysis using the ProteomeLab PF2D platform was implemented to generate 2-D protein expression maps from biopsies. Chromatograms produced common signature profiles between sulindac and nonsulindac treated samples, and contrasting profiles termed "fingerprints". We selected a double peak that appeared in tumor biopsies from sulindac-treated mice. Further analyses using MS sequencing identified this protein as histone H2B. The location of H2B in the 1(st) dimension strongly suggested PTM, consistent with identification of two oxidized methionines. While further studies on sulindac proteomic fingerprints are underway, this study demonstrates the feasibility and advantages of "real-time" proteomic analysis for obtaining information on biomarker discovery and drug activity that would not be revealed by a genetic assay. This approach should be broadly applicable for assessing lesion responsiveness in a wide range of translational and human clinical studies.     

An analysis of the length of hospital stay for cataract patients in Japan using the discrete-type proportional hazard model

We analyze the length of hospital stays of patients hospitalized for cataract and related diseases (Diagnosis Related Groups (DRG) 2041) in Japan, utilizing the data pertaining to 3436 patients on whom one-eye lens operations are performed. We use the discrete-type proportional hazard model to analyze variables that may affect the length of stay.     

3—THE FINITE-DEFORMATION THEORY OF PLAIN-WEAVE FABRICS PART I: THE BIAXIAL-DEFORMATION THEORY

Theories of the biaxial tensile properties, the uniaxial tensile properties, and the shear-deformation properties of plain-weave fabrics are presented in a general form, a simplified stereo-model of the structure of plain-weave fabrics being used throughout these theories.

In the first part of this series, the biaxial tensile-deformation theory is presented with the aid of the model, and the forces required to stretch the fabric along the warp and weft directions at the same time are theoretically calculated from the properties of yarns and from the structure of the fabrics. In this biaxial theory, both warp and weft yarns are assumed to be perfectly flexible, and the forces caused by yarn-bending are ignored. The compressibility of the yarn under the action of a lateral compressive force is also introduced into the theory, and it is shown that the compressive properties of yarns have a great influence on the tensile properties of the fabrics.     

38—A FINITE-DEFORMATION THEORY OF THE 2/2-TWILL WEAVE UNDER BIAXIAL EXTENSION

A mechanical model of the 2/2-twill weave is presented in order to investigate the tensile properties of this weave under biaxial extension. The theory predicts that the compressional deformations of the warp and the weft at their cross-over point produce a superior effect on the tensile properties of the weave, especially in the relatively small-extension state. Experimental investigation to examine the accuracy of this theory is also reported, and good agreement between the theory and the experimental result is demonstrated.