Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Screening of Inhibitors Targeting Heat Shock Protein 47 Involved in the Development of Idiopathic Pulmonary Fibrosis

Heat shock protein 47 (HSP47), a collagen-specific molecular chaperone, is causally related to fibrotic diseases, including idiopathic pulmonary fibrosis. The identification of Compounds that interfere with the HSP47-collagen interaction is essential for the development of relevant therapeutics. Herein, we prepared human HSP47 as a soluble fusion protein expressed in E. coli and established an assay system for HSP47 inhibitor screening. We screened a natural and synthetic Compound library established at Nagasaki University. Among 1023 Compounds, 13 exhibited inhibitory activity against human HSP47, of which three inhibited its function in a dose-dependent manner. Epigallocatechin-3-O-gallate, one of these three Compounds, is a typical polyphenol Compound derived from tea leaves. Structurally related Compounds were synthesized and examined for their activity, revealing a hydroxyl group at A-ring position 5 as important for its activity. The present findings provide valuable insight for the development of natural product-derived therapeutics for fibrotic diseases, including idiopathic pulmonary fibrosis.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.     

Detection of a brain aneurysm and a way to search for a brain aneurysm aimed at the development of a system to simulate an operation

In this article, a system is proposed for a simulated operation which would help a trainee surgeon to perform a medical operation to ensure that a cerebral aneurysm does not burst. The physician will have acquired empirical medical technologies from operations in traditional clinical teaching. However, there is a problem with safety and the burden to the patient. Therefore, recently a new training approach for a simulated medical operation using virtual reality has been explored. With the aim of developing a simulated system for a medical operation for a cerebral aneurysm, we considered the necessary functions such as detecting the brain aneurysm that is the target of the operation, and searching for a suitable blood vessel to make a plan for the operation.     

Shear viscosity of the B phase of superfluid3He

The shear viscosity (T) in the Balian-Werthamer (BW) state of superfluid ³ He is calculated variationally throughout the region 0t 1(t=T/T _c) from the transport equation for Bogoliubov quasiparticles. Coherence factors are treated exactly in the calculation of the collision integral. The numerical result for =_s= _s(T)/_n(T_c) agree very well with experiment in the range 0.8t1.0. Analytic expressions = 0.577 (1–1.0008t) and =1–(23/64) [=(T)/k _B T] are obtained in the low-temperature region and in the vicinity ofT _c, respectively. From the numerical analysis it is shown that the latter equation is valid only in the temperature range 0.9997t1.0.Supported by the Research Institute for Fundamental Physics, Kyoto University.     

Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.     

Effect of gamma-ray irradiation on the TSC in polyethersulfone

When polyethersulfone was irradiated by γ rays and then poled at 37°C, a new TSC (thermally stimulated current) peak appeared at ~100°C. This new peak and other peaks near 40 and 150°C increase with an increase in dose of ~0.6 kGy, and this is considered to be due to trapped charges and other ionic carriers becoming mobile when rearrangement of scissioned chains occurs. However, if the dose exceeds 0.6 kGy, the peak magnitude decreases. Furthermore, if the TSC was poled at 120°C, only the peak near 150°C appeared and this peak monotonically decreased with an increase in the irradiation dose. A similar decreasing tendency was also observed in the conduction current and in the residual voltage. These decreasing features are considered to be caused by the radiation-induced change that rearrangement of scissioned chains decreases free volume for ionic transport     

Role of number of consecutive voltage zero-crossings in propagation of water trees in polyethylene

Effects of superposition of a low-frequency (0.1 to 50 Hz) voltage and a high-frequency 2 kHz voltage on the growth of water trees in polyethylene are examined. It has become clear that both the number of total voltage zero-crossings during the whole voltage application period and the number of consecutive voltage zero-crossings in the instant of the polarity reversal of the low-frequency voltage play important roles in the length and shape of water trees. Namely, the water tree length becomes longer as the number of total zero-crossings increases. Furthermore, among the voltages with the same number of total zero-crossings, the length becomes even longer with a prolonged shape in the direction of electric field as the number of consecutive zero-crossings increases. Effects of superposition of a high-frequency voltage onto a dc voltage are also examined. In this case, the dc voltage seems not to have any influence to the tree growth. By assuming the presence of space charge around the water-tree tip, the effective zero-crossings become only sensitive to the high-frequency component. Therefore, this result also indicates that the number of voltage reversals at the tree tip plays a crucial role in the growth of water trees.     

Surface degradation of polyamide nanocomposites caused by partial discharges using IEC (b) electrodes

Partial discharge (PD) degradation of polyamide both without nanoscale fillers (nanofillers) and with 2,4 and 5 wt% additions of nanofillers was investigated. Such materials were subjected to PDs using the IEC (b) electrodes for evaluation. Comparisons were made as to the surface roughness observed by scanning electron microscopy and atomic force microscopy. It was found that the change in the surface roughness is far smaller in specimens with nanofillers than those without nanofillers, and that the 2 wt% addition is sufficient for improvement of the surface roughness. Furthermore, it was elucidated that the difference of surface roughness of the degraded area due to PDs among the specimens originates from the difference in their crystalline structures. These results indicate that polyamide nanocomposite is more resistance to PDs than polyamide without nanofillers.