超低失真多层陶瓷电容相较于薄膜电容的优势

在滤波应用中,超低失真的表面贴装多层陶瓷电容(MLCC),已经成为模拟电路设计者在SMD塑料薄膜(薄膜片式)电容之外的另一种选择,它的体积更小、成本更低、也更为可靠。这些潜在的模拟电路应用实例包括:音响设备、无线设备、锁相环(PLL)和通信设备(如调制/解调器)等。这些新型电容的等效串连电阻(ESR)极低,因此非常适合于高效率的DC/DC变换器和高速微处理器应用。低失真电容的应用随着处理器速度的提高和工作电压的降低,噪声会给信号完整性带来严重的影响,除非能通过过滤或解耦的办法将其去除。在声频、射频、PLL和通信电路中,跟踪误差…     

Acrylic nonaqueous dispersion using butylated melamine-formaldehyde resin as dispersant

A series of acrylic nonaqueous dispersions were prepared by using various kinds of butylated melamine–formaldehyde (BMF) resins as dispersant. The functional group composition of BMF to form stable dispersion was butoxy group more than 13 mol/BMF 1 mol, and methylol group ranged from 1 to 2.5 mol/BMF 1 mol. It is concluded that the anchoring of BMF to acrylic copolymer was due to the formation of covalent bond between methylol group in BMF and hydroxy group in acrylic copolymer.     

Behavioral and electroantennogram responses of periplanone analogs

The biological activities of synthetic periplanone analogs, including four candidates of periplanone-A (P-A), were evaluated by behavioral and electroantennogram (EAG) assays. Among 16 periplanone analogs, six compounds evoked pheromonal activity from the male American cockroaches. The threshold dosages of these biological active analogs were 10–10⁵ times lower than that of the known periplanone mimic, germacrene-D. The conformation required for eliciting the pheromonal activity is discussed in terms of the structure-activity relationship of these analogs. Hauptmann's P-A elicited the strongest pheromonal activity among four candidates of P-A in our bioassay, suggesting that Hauptmann's P-A is a natural P-A produced from female cockroaches.     

Solubility of NiO in Al2O3

Solubility of NiO in Al₂O₃ was determined by electron probe microanalysisy A diffusion couple method was used by coupling an NiO-doped Al₂O₃ polycrystal to a pure single crystal of Al₂O₃. The solubility of NiO in Al₂O₃ in air was 230 wt ppm (157 at. ppm of cations) and 170 wt ppm (116 at. ppm) at 2073 and 1973 K, respectively. The solubility of NiO in Al₂O₃ obtained in this work was compared with our previous work of the solubility of MgO in Al₂o₃.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Revolving Vernier Mechanism Controls Size of Linear Homomultimer

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.     

Meshless analysis of potential problems in three dimensions with the hybrid boundary node method

Combining a modified functional with the moving least‐squares (MLS) approximation, the hybrid boundary node method (Hybrid BNM) is a truly meshless, boundary‐only method. The method may have advantages from the meshless local boundary integral equation (MLBIE) method and also the boundary node method (BNM). In fact, the Hybrid BNN requires only the discrete nodes located on the surface of the domain. The Hybrid BNM has been applied to solve 2D potential problems. In this paper, the Hybrid BNM is extended to solve potential problems in three dimensions. Formulations of the Hybrid BNM for 3D potential problems and the MLS approximation on a generic surface are developed. A general computer code of the Hybrid BNM is implemented in C++. The main drawback of the ‘boundary layer effect’ in the Hybrid BNM in the 2D case is circumvented by an adaptive face integration scheme. The parameters that influence the performance of this method are studied through three different geometries and known analytical fields. Numerical results for the solution of the 3D Laplace's equation show that high convergence rates with mesh refinement and high accuracy are achievable. Copyright © 2004 John Wiley & Sons, Ltd.     

HSPF Simulation of Runoff and Sediment Loads in the Upper Changjiang River Basin, China

To evaluate the performance of a computer model simulating runoff and sediment load in the upper region of the Changjiang (Yangtze River) basin over a relatively short time interval, including examining the applicability of the input precipitation data generated from global circulation models and satellite data, we used a spatially distributed model, HSPF with the International Satellite Land Surface Climatology Project (ISLSCP) precipitation data for 1987 and 1988 as input data. The Nash–Sutcliffe coefficient (R2) for 5-day average streamflow was 0.94 in the calibration period and 0.95 in the verification period for the whole upper region. Moreover, the model simulated the 5-day average streamflow well in each main tributary, as shown by R2 values of 0.46–0.96, except that it underestimated the peak flow rates during the flood season over 2 years by up to 71% in Tuojiang and 61% in Jialingjiang. The model simulated the 5-day concentrations of suspended solids (SS) fairly well in the headwaters and upper regions of the Jinshajiang, Yalongjiang, and Minjiang watersheds, as shown by R2 values of 0.31–0.65. In the other regions, however, the model underestimated the SS load by up to 72%, and rarely simulated the fluctuation of SS concentration in each river channel during the flood season. These errors led to the underestimation of sediment runoff volume from the whole upper region during the flood season, as shown by the ratio of the simulated sediment load to the observed data at Yichang: 0.69 in the calibration period and 0.68 in the verification period. The ISLSCP precipitation tended to be more frequent and less intense than the measured precipitation. This was probably the main reason why the HSPF did not perform well in all regions at all times.     

Dynamic mechanical properties of three‐component composites (acrylic polymer/epoxy/SiO2) in the glass‐transition region

In previous studies, we reported the linear and nonlinear rheological properties of three‐component composites consisting of acrylic polymer (AP), epoxy resin (EP), and various SiO₂ contents (AP/EP/SiO₂) in the molten state. In this study, the dynamic mechanical properties of AP/EP/SiO₂ composites with different particle sizes (0.5 and 8 μm) were investigated in the glass‐transition region. The EP consisted of three kinds of EP components. The α relaxation due to the glass transition shifted to a higher temperature with an increase in the volume fraction (?) for the AP/EP/SiO₂ composites having a particle size of 0.5 μm, but the α relaxation scarcely shifted for the composite having a particle size of 8 μm as a general result. This result suggested that the SiO₂ nanoparticles that were 0.5 μm in size adsorbed a lot of the low‐glass‐transition‐temperature (T_g) component because of their large surface area. The AP/SiO₂ composites did not exhibit a shift in T_g; this indicated that the composite did not adsorb any component. The modulus in the glassy state (E′_g) exhibited a very weak &phis; dependence for the AP/EP/SiO₂ composites having particle sizes of 0.5 and 8 μm, although E′_g of the AP/SiO₂ composites increased with &phis;. The AP/EP/SiO₂ composites exhibited a peculiar dynamic mechanical behavior, although the AP/SiO₂ composites showed the behavior of general two‐component composites. Scanning electron microscopic observations indicated that some components in the EP were adsorbed on the surface of the SiO₂ particles. We concluded that the peculiar behavior of the AP/EP/SiO₂ composites was due to the selective adsorption of the EP component. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40409.