Multi-criteria Decision-making Approach for Environmental Impact Assessment to Reduce the Adverse Effects Of Dams

Water Resources Management - Environmental Impact Assessments (EIAs) of development projects are necessary to minimize negative impacts and maximize benefits. The objective of this paper is to...     

Positive holes in magnesium oxide. Correlation between magnetic, electric, and dielectric anomalies

Magnetic susceptibility measurements of high purity MgO single crystals (<50-wt. ppm transition metals) by means of a vibrating-sample magnetometer shows an anomaly at 800 K. At the same temperature the electric conductivity increases anomalously, the static dielectric constant epsilon increases from 9 to approximately 150, a pronounced positive surface charge appears, and Fe2+ in the MgO matrix oxidizes to Fe3+. The data are consistent with O2(2-) (peroxy) defects, representing self-trapped, spin-paired positive holes at Mg2+ vacancy sites. Diamagnetic at low temperatures, the holes start to decouple their spins > 600 K, probably forming at first V0 centers (two O- at an Mg2+ vacancy), then V- centers (single O- at an Mg2+ vacancy), and releasing mobile O- states. These O- represent itinerant charge carriers on acceptor levels near the O 2p-dominated valence band and conduct by O- /O2- valency fluctuations. The O- concentration is of the order of 8 X 10(19) cm-3.     

Selective harmonic elimination method for wide range of modulation indexes in multilevel inverters using ICA

Selective harmonic elimination（SHE） in multilevel inverters is an intricate optimization problem that involves a set of nonlinear transcendental equations which have multiple local minima. A new advanced objective function with proper weighting is proposed and also its efficiency is compared with the objective function which is more similar to the proposed one. To enhance the ability of the SHE in eliminating high number of selected harmonics, at each level of the output voltage, one slot is created. The SHE problem is solved by imperialist competitive algorithm（ICA）. The conventional SHE methods cannot eliminate the selected harmonics and satisfy the fundamental component in some ranges of modulation indexes. So, to surmount the SHE defect, a DC-DC converter is applied. Theoretical results are substantiated by simulations and experimental results for a 9-level multilevel inverter. The obtained results illustrate that the proposed method successfully minimizes a large number of identified harmonics which consequences very low total harmonic distortion of output voltage.     

Algorithm for Increasing the Speed of Evolutionary Optimization and its Accuracy in Multi-objective Problems

Optimization algorithms are important tools for the solution of combinatorial management problems. Nowadays, many of those problems are addressed by using evolutionary algorithms (EAs) that move toward a near-optimal solution by repetitive simulations. Sometimes, such extensive simulations are not possible or are costly and time-consuming. Thus, in this study a method based on artificial neural networks (ANN) is proposed to reduce the number of simulations required in EAs. Specifically, an ANN simulator is used to reduce the number of simulations by the main simulator. The ANN is trained and updated only for required areas in the decision space. Performance of the proposed method is examined by integrating it with the non-dominated sorting genetic algorithm (NSGAII) in multi-objective problems. In terms of density and optimality of the Pareto front, the hybrid NSGAII-ANN is able to extract the Pareto front with much less simulation time compared to the sole use of the NSGAII algorithm. The proposed NSGAII-ANN methodology was examined using three standard test problems (FON, KUR, and ZDT1) and one real-world problem. The latter addresses the operation of a reservoir with two objectives (meeting demand and flood control). Thus, based on this study, use of the NSGAII-ANN integrative algorithm in problems with time-consuming simulators reduces the required time for optimization up to 50 times. Results of the real-world problem, despite lower computational-time requirements, show a performance similar to that achieved in the aforementioned test problems.     

Performance of externally FRP reinforced columns for changes in angle and thickness of the wrap and concrete strength

In this study, the performance of axially loaded, small-scale, and fiber-reinforced polymer (FRP) wrapped concrete columns with various wrap angle configurations, wrap thicknesses, and concrete strengths was investigated through nonlinear finite element analysis. Three different wrap thicknesses, wrap ply angle configurations of 0°, ±15°, and 0°/±15°/0° with respect to the circumferential direction, and concrete strength values ranging from 3 ksi to 6 ksi were considered. An existing experimental study on FRP-confined circular columns in the literature was utilized to validate numerical analysis models. The finite element analysis results showed substantial increase in the axial compressive strength and ductility of the FRP-confined concrete cylinders as compared to the unconfined cylinders. The increase in wrap thickness also resulted in enhancement of axial strength and ductility of the concrete columns. The gain in axial compressive strength in FRP-wrapped concrete columns was observed to be higher for lower strength concrete and the highest in the columns wrapped with the 0° ply angle configuration.     

Certificateless designated verifier signature revisited: achieving a concrete scheme in the standard model

International Journal of Information Security - In a designated verifier signature (DVS) scheme, the signer (Alice) creates a signature which is only verifiable by a designated verifier (Bob)....     

Efficient loading and entrapment of tamoxifen in human serum albumin based nanoparticulate delivery system by a modified desolvation technique

Herein, the poorly water-soluble drug, Tamoxifen (Tmx), was loaded in the amphipathic matrix of human serum albumin (HSA) nanoparticles by a modified desolvation method. In order to enhance the drug loading (DL) and drug entrapment efficiency (DEE) (<2% and 10%, respectively), ultrasonication of Tmx-HSA mixture was performed prior to desolvation process. Tmx loading and entrapment efficiency were optimized by employment of the response surface methodology (RSM)-central composite design (CCD) of experiments. Under the optimum conditions of 1.59 mg Tmx/ml concentration, 7.76 pH and 5 h incubation of HSA-Tmx, the DL of 6.7% and DEE of 74% are achievable. Particles with the average size of 195 nm, zeta potential of −21 mV and polydispersity index of 0.09 were produced under these conditions. A more sustained Tmx release behavior was observed from polyethylene glycol (PEG) conjugated nanoparticles in comparison to the non-PEGylated ones. The short-term stability investigation showed no alteration in physicochemical properties of nanoparticles at 4 and 37 °C, but small increase in nanoparticles size was observed after three months of storage at room temperature. This is the first report for efficient production of a Tmx delivery system based on HSA nanoparticles.     

Characterization and formation mechanism of nanocrystalline W–Al alloy prepared by mechanical alloying

Tungsten and aluminum elemental powders with composition W–20 wt.% Al were mechanical alloyed in high energy planetary ball mill. Structural and morphological changes of powder particles after different milling times were studied by X-ray diffractometer, scanning electron microscopy and microhardness measurements. Mechanical alloying of this system led to the formation of W–Al alloy as a result of formation of W/Al layered microstructure having faceted interface between layers. This alloy indicated high microhardness value of about 570 Hv.     

The effect of annealing on fracture behaviour of polycarbonate

Brittle fracture of polycarbonate (PC) caused by thermal pretreatment, is discussed in this paper. Further results on the thickness effect provide added support for the earlier work on this aspect. These results together with the temperature effect on the fracture of polycarbonate give a complete picture of brittle fracture in a tough material.