Investigation on sulphonated zinc oxide nanorod incorporated sulphonated poly (1,4-phenylene ether ether sulfone) nanocomposite membranes for improved performance of microbial fuel cell

Hydrothermally prepared zinc oxide nanorods are sulphonated (S–ZnO NR) and incorporated into 15% Sulphonated Poly (1,4-Phenylene Ether Ether Sulfone) (SPEES) to improve the hydrophilicity, water uptake and ion transfer capacity. Water uptake and ion transfer capacity increased to 34.6 ± 0.6% and 2.0 ± 0.05 meq g^?1 from 29.8 ± 0.3% and 1.4 ± 0.04 meq g^?1 by adding 7.5 wt% S–ZnO NR to SPEES. Morphological studies show the prepared S–ZnO NR is well dispersed in the polymer matrix. SPEES +7.5 wt% S–ZnO NR membrane exhibits optimum performance after three-weeks of continual operation in a fabricated microbial fuel cell (MFC) to produce a maximum power density of 142 ± 1.2 mW m^?2 with a reduced biofilm compared to plain SPEES (59 ± 0.8 mW m^?2), unsulphonated filler incorporated SPEES (SPEES + 7.5 wt% ZnO, 68 ± 1.1 mW m^?2) and Nafion (130 ± 1.5 mW m^?2) thereby suggesting its suitability as a sustainable and improved cation exchange membrane (CEM) for MFCs.     

Acoustic emission technique for leak detection in an end shield of a pressurised heavy water reactor

This paper discusses the successful application of the Acoustic Emission Technique (AET) for detection and location of leak paths present on the inaccessible side of an end shield of a Pressurised Heavy Water Reactor (PHWR). The methodology was based on the fact that air and water leak AE signals have different characteristic features. Baseline data was generated from a sound end-shield of a PHWR for characterizing the background noise. A mock up end-shield system with saw cut leak paths was used to verify the validity of the methodology. It was found that air leak signals under pressurisation (as low as 3 psi) could be detected by frequency domain analysis. Signals due to air leaks from various locations of a defective end-shield were acquired and analysed. It was possible to detect and locate leak paths. Presence of detected leak paths were further confirmed by alternate test.     

Role of Silicon Coupling Grafted Natural Fillers on Visco-Elastic,Tensile-Fatigue and Water Absorption Behavior of Epoxy Resin Composite

Silicon - This work investigates the influence of silicon based coupling agents on visco-elastic properties of natural filler dispersed epoxy resin composites. Also this work attempts to explore...     

Structural integrity assessment of the containment structure of a pressurised heavy water nuclear reactor using impact echo technique

The impact echo technique is based on the use of transient stress waves for non-destructive detection of flaws in concrete structures. Impact-echo testing has been carried out for assessment of the structural integrity of the ring beam of a pressurised heavy water nuclear reactor. In order to develop the test procedure for carrying out impact echo testing, mock up calibration blocks were made. The detectability of the impact echo system has also been established in terms of the depth and the lateral dimension of the detectable flaw for the ring beam under consideration. Based on the optimised test parameters identified with the help of the studies carried out on the mock up blocks, impact echo testing was carried out on the ring beam of the reactor containment structure, for assessing its structural integrity.     

Microstructure evolution during batch annealing

Design of industrial annealing cycles requires recrystallization and grain growth studies, which are typically carried out under isothermal laboratory condition. The kinetics coefficients of these phase transformations are obtained from such studies, which are subsequently used in designing the industrial nonisothermal cycles using the additivity principles. However, the strong heating rate effects on the grain growth kinetics necessitate such kinetics studies using industrial thermal profiles. In the present work, the hot and cold spot cycles of an industrial batch annealing cycle for AIK grade steel have been simulated in a programmable laboratory furnace. Subsequently, the effect of annealing temperature, soaking time, and heating rate on the microstructural features, such as grain size distribution, grain shape anisotropy, and grain orientation, have been investigated through extensive quantitative microscopy. The implications of these results on the design of industrial batch annealing cycles have been discussed.     

Performance of orthogonal frequency division multiplexing based M-ary quadrature amplitude modulation in asymmetrical dual-hop mixed RF-FSO transmission system

This paper investigates the performance of a dual-hop mixed relay system with radio frequency (RF) and free-space optics (FSO) communication under the effect of pointing error (PE) and atmospheric turbulence (AT). This paper considers a system where RF and FSO links are cascaded. The RF link is modeled by Nakagami-m fading, and the FSO link is modeled as gamma–gamma (G-G) fading channel. Both the channel models use orthogonal frequency division multiplexing (OFDM) with M-ary quadrature amplitude modulation (QAM). The expressions for probability density function, cumulative distribution function, signal-to-noise ratio, and ergodic capacity are derived. The moment generating function (MGF) of fading and the bit error rate (BER) of the OFDM-based M-ary QAM scheme is derived in terms of Meijer's G-function. It has been observed that, in fixed gain relay systems, the modulation scheme's BER is dominated by the SNR of the RF link. While in a variable gain relay system, the turbulence conditions of the FSO system affect the SNR and the BER of the modulation method. The feasibility of heterodyne detection and intensity modulation direct detection (IM/DD) is analyzed in terms of outage probability and ergodic capacity. The results can be used to choose the optimal modulation order and relay system for QAM-OFDM-based optical wireless systems.     

A Consortium Blockchain Based Overseas Fund Transfer System

Domestic fund transfers are all the time immediate, handier and obtainable however in overseas fund transfer, funds are transferred from payers account to payees account through the correspondent banks, central bank and messaging network which involves intermediaries and allied charges. Blockchain Technology has grabbed the interest of financial systems due to its inventive benefits such as decentralised structure, faster speed, cost-effectiveness and more security over conventional approaches. Adopting Blockchain Technology for overseas fund transfer can overcome the transaction delays, intermediaries’ failures and recurring costs involved in the current system. In this paper, a Consortium Blockchain based overseas fund transfer process is proposed to achieve faster operations, security and transparency. Hyperledger Fabric Blockchain framework has been used for overseas fund transfer process and web-user interface is developed for the same. Simulation results demonstrate the significance of Blockchain as a promising technology for overseas fund transfer process to facilitate speed, security, transparency and efficiency for overseas fund transfer.

     

Multiobjective optimization and analysis of copper–titanium diboride electrode in EDM of monel 400™ alloy

Electrical discharge machining (EDM) is one of the most accepted machining processes in the precision manufacturing industry. In EDM process, finding an alternative tool material is the demand in modern manufacturing industry. Therefore, an attempt had been made to fabricate copper–titanium diboride powder metallurgy electrode to test in EDM on monel 400? material. The experiments are planned using center composite second-order rotatable design and the model is developed by response surface methodology. The machining characteristics have analyzed using the developed model. In this study, four input parameters such as titanium diboride percentage, pulse current, pulse on time, and flushing pressure are selected to evaluate the material removal rate (MRR) and tool wear rate (TWR). The adequacy of the developed regression model has tested through analysis of variance test. The desirability-based multiobjective optimization is used to find the optimal process parameter which has given maximum MRR and minimum TWR. The optimum process parameters obtained were titanium diboride of 16%, pulse current of 6 A, flushing pressure of 1 Mpa, and pulse on time of 35?µs. The validity of the response surface model is further verified by conducting confirmation experiments.     

Hydriding characteristics of palladium and platinum alloyed FeTi

Effect of alloying on the hydriding characteristics of FeTi with noble metals such as platinum and palladium (5% by weight) has been investigated. It is observed that palladium has a favourable effect with respect to easy activation, decreased hysteresis and lower plateau pressures for hydrogen absorption and desorption process. For Pd/FeTi, a saturation composition of Pd/FeTiH_1.85 having the -phase, has been obtained. Unlike this, for Pt/FeTi, the total hydrogen absorption is decreased significantly and a saturation composition of Pt/FeTiH_1.5 having only ₂ phase, is observed.     

Magnetization study of Fe-doped ZnO co-doped with Cu: Synthesized by wet chemical method

Fe- and Cu-doped ZnO of nominal compositions Zn_0.95Fe_0.05O and Zn_0.94Fe_0.05Cu_0.01O were synthesized by a wet chemical route. X-ray diffraction analysis of the samples annealed at 575 K showed that they are single phase without any secondary phases. DC magnetization measurements of Cu co-doped samples (Zn_0.94Fe_0.05Cu_0.01O) as a function of field at room temperature showed ferromagnetic signature while the samples without Cu co-doping (Zn_0.95Fe_0.05O) are paramagnetic in nature. On increasing the temperature of annealing from 575 K to 1,075 K an impurity phase emerges in both the samples, which has been identified as a variant of ZnFe₂O₄. Both the samples heated at and above 1,075 K are found to be paramagnetic at room temperature. These observations, the absence of room temperature ferromagnetism in Zn_0.95Fe_0.05O and the disappearance of ferromagnetism in Zn_0.94Fe_0.05Cu_0.01O on raising the temperature of annealing clearly rules out the likelihood of room temperature ferromagnetism arising from the impurity phases like γ-Fe₂O₃ and/or ZnFe₂O₄ that might have been formed during the synthesis. Our results strongly suggest that room temperature ferromagnetism in Zn_0.94Fe_0.05Cu_0.01O can be attributed to the formation of a secondary phase of Cu-doped ZnFe₂O₄.