Measurement and modeling of the sidewall threshold voltage ofmesa-isolated SOI MOSFETs

Five-terminal silicon-on-insulator (SOI) MOSFETs have been characterized to determine the threshold voltage at the front, back, and sidewall as a function of the body bias. The threshold voltage shift with the body bias at the front and back interfaces can be explained by the standard bulk body effect equation. However, the threshold voltage shift at the sidewall is smaller than predicted by this equation and saturates at large body biases. This anomalous behavior is explained by two-dimensional charge sharing between the sidewall and the front and back interfaces. An analytical model that accounts for this charge sharing by a simple trapezoidal approximation of the depletion regions and correctly predicts the sidewall threshold voltage shift and its saturation is discussed. The model makes it possible to measure the sidewall threshold even when it is larger than the front threshold voltage     

Reliability-based failure cause assessment of collapsed bridge during construction

Until now, in many forensic reports, the failure cause assessments are usually carried out by a deterministic approach so far. However, it may be possible for the forensic investigation to lead to unreasonable results far from the real collapse scenario, because the deterministic approach does not systematically take into account any information on the uncertainties involved in the failures of structures.Reliability-based failure cause assessment (reliability-based forensic engineering) methodology is developed which can incorporate the uncertainties involved in structural failures and structures, and to apply them to the collapsed bridge in order to identify the most critical failure scenario and find the cause that triggered the bridge collapse. Moreover, to save the time and cost of evaluation, an algorithm of automated event tree analysis (ETA) is proposed and possible to automatically calculate the failure probabilities of the failure events and the occurrence probabilities of failure scenarios. Also, for reliability analysis, uncertainties are estimated more reasonably by using the Bayesian approach based on the experimental laboratory testing data in the forensic report. For the applicability, the proposed approach is applied to the Hang-ju Grand Bridge, which collapsed during construction, and compared with deterministic approach.     

Degradation of polyethylene terephthalate films in the presence of lubricants for HFC 134a: a critical issue for hermetic motor insulation systems

Earlier studies conducted in the use of sealed tubes with polyalkylene glycol lubricants and polyethylene terephthalete (PET) films revealed that the PET films exhibited embrittlement and (visual) degradation. This led to an investigation of PET embrittlement mechanisms with the new lubricants used with HFC 134a. The lubricants studied were three polypropylene glycols (the monol, the diol and the completely end-capped glycols), pentaerythritol ester and a blend of monol and ester. The effects of moisture content, temperature and lubricant structure were studied. All lubricants in this study were of viscosity grade ISO-32 (150 SUS). The results were compared to PET film embrittlement in the presence of CFC 12 and mineral oil. This study reconfirmed the earlier findings that the PET films must be dried to lower than 0.1 wt.% moisture content for use in hermetic systems. This paper discusses the effect of the moisture content of the lubricant and the effect of the lubricant structure on PET films. The dependence of the various mechanisms on temperature is shown. Esters and end-capped polyalkylene glycols are recommended for use with HFC 134a.     

Medium access control in ad hoc networks with MIMO links: optimization considerations and algorithms

we present a medium access control (MAC) protocol for ad hoc networks with multiple input multiple output (MIMO) links. MIMO links provide extremely high spectral efficiencies in multipath channels by simultaneously transmitting multiple independent data streams in the same channel. MAC protocols have been proposed in related work for ad hoc networks with other classes of smart antennas such as switched beam antennas. However, as we substantiate in the paper, the unique characteristics of MIMO links coupled with several key optimization considerations, necessitate an entirely new MAC protocol. We identify several advantages of MIMO links, and discuss key optimization considerations that can help in realizing an effective MAC protocol for such an environment. We present a centralized algorithm called stream-controlled medium access (SCMA) that has the key optimization considerations incorporated in its design. Finally, we present a distributed SCMA protocol that approximates the centralized algorithm and compare its performance against that of baseline protocols that are CSMA/CA variants.     

Process Technology for the Production of Micronutrient Rich Red Palm Olein

Crude palm oil (CPO) is the richest natural source of carotenes that are destroyed in the conventional processing. There is a growing demand for nutritional products containing bioactive constituents externally fortified or preserved through modified process. A commercially viable process for the production of red palm olein (RPOn) rich in carotenes, tocols and sterols has been developed at pilot scale. The process developed involved neutralization of CPO followed by crystallization at controlled rate of cooling and deodorization of the resultant neutralized and winterized palm olein (WPOn) under controlled conditions of temperature and high vacuum. Analytical data related to micronutrients at each process step was monitored. The RPOn thus produced had not more than 0.25% of free fatty acids (FFA) and it retained more than 80% of the carotenes, about 85% of tocols and 65% of sterols originally present in the CPO. The physico-chemical characteristics of RPOn revealed that it is nutritionally of superior quality compared to that of the commercial refined bleached deodorized (RBD) palm olein currently available in the market. The carotenes, tocols and sterols profile of RPOn by HPLC showed that they were retained in their natural forms.     

Silo music and silo quake: granular flow-induced vibration

Acceleration and sound measurements during granular discharge from silos are used to show that silo music is a sound resonance produced by silo quake. In tall and narrow silos, the latter is produced by stick-slip friction between the wall and the granular material. For the discharge rates studied, the occurrence of flow pulsations is determined primarily by the surface properties of the granular material and the silo wall. The measurements show that the pulsating motion of the granular material drives the oscillatory motion of the silo.     

A non-parametric method to determine basic probability assignment for classification problems

As an important tool for knowledge representation and decision-making under uncertainty, Dempster-Shafer evidence theory (D-S theory) has been used in many fields. The application of D-S theory is critically dependent on the availability of the basic probability assignment (BPA). The determination of BPA is still an open issue. A non-parametric method to obtain BPA is proposed in this paper. This method can handle multi-attribute datasets in classification problems. Each attribute value of the dataset sample is treated as a stochastic quantity. Its non-parametric probability density function (PDF) is calculated using the training data, which can be regarded as the probability model for the corresponding attribute. The BPA function is then constructed based on the relationship between the test sample and the probability models. The missing attribute values in datasets are treated as ignorance in the framework of the evidence theory. This method does not have the assumption of any particular distribution. As a result, it can be flexibly used in many engineering applications. The obtained BPA can avoid high conflict between evidence, which is desired in data fusion. Several benchmark classification problems are used to demonstrate the proposed method and to compare against existing methods. The constructed classifier based on the proposed method compares well to the state-of-the-art algorithms.     

Chemical toughening of epoxies. I. Structural modification of epoxy resins by reaction with hydroxy-terminated poly(butadiene-co-acrylonitrile)

In an attempt to toughen the epoxy resin matrix for fiber-reinforced composite applications, a chemical modification procedure of a commercially available bisphenol-A-based epoxy resin using reactive liquid rubber HTBN [hydroxy-terminated poly(butadiene-co-acrylonitrile)] and TDI (tolylene diisocyanate) is described. The progress of the reaction and the structural changes during modification process are studied using IR spectroscopy, viscosity data, and chemical analysis (epoxy value determination). The studies support the proposition that TDI acts as a coupling agent between the epoxy and HTBN, forming a urethane linkage with the former and an oxazolidone ring with the latter. The chemical reactions that possibly take place during the modification are discussed.