Design of bandpass–bandpass diplexers using rectangular-, T-, and L-shaped resonators for hybrid power amplifier and 5G applications

Analog Integrated Circuits and Signal Processing - In this paper, two bandpass–bandpass diplexers, based on L-, T- and rectangular-shaped resonators are designed and analyzed, which are used...     

A Statistical Model for Early Detection of DDoS Attacks on Random Targets in SDN

Wireless Personal Communications - Software Defined Networks (SDNs) have accelerated and simplified the management, configuration and error detection in today’s networking systems. However,...     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Introduction

The Journal of Supercomputing -     

Microwave thickness measurement of lossy layered dielectric slabs using incoherent reflectivity

Radiative transfer theory is used to calculate the incoherent effective reflectivity (_e) for a multilayer lossy dielectric medium backed by a conducting plate. The theoretical results of this formulation are compared with that of the coherent approach. Several test cases are presented to show the characteristics of _e as a function of thickness, and dielectric constant of the dielectric layers, and frequency. The results can ultimately be used in nondestructive dielectric thickness measurement.     

Fully Petrov–Galerkin spectral method for the distributed-order time-fractional fourth-order partial differential equation

Distributed fractional derivative operators can be used for modeling of complex multiscaling anomalous transport, where derivative orders are distributed over a range of values rather than being just a fixed integer number. In this paper, we consider the space-time Petrov–Galerkin spectral method for a two-dimensional distributed-order time-fractional fourth-order partial differential equation. By applying a proper Gauss-quadrature rule to discretize the distributed integral operator, the problem is converted to a multi-term time-fractional equation. Then, the proposed method for solving the obtained equation is based on using Jacobi polyfractonomial, which are eigenfunctions of the first kind fractional Sturm–Liouville problem (FSLP), as temporal basis and Legendre polynomials for the spatial discretization. The eigenfunctions of the second kind FSLP are used as temporal basis in test space. This approach leads to finding the numerical solution of the problem through solving a system of linear algebraic equations. Finally, we provide some examples with smooth solutions and finite regular solutions to numerically demonstrate the efficiency, accuracy, and exponential convergence of the proposed method.

     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

Design of explicit model predictive control for constrained linear systems with disturbances

On-line model predictive control approaches require the online solution of an optimization problem. In contrast, the explicit model predictive control moves major part of computation offline. Therefore, eMPC enables one to implement a MPC in real time for wide range of fast systems. The eMPC approach requires the exact system model and results a piecewise affine control law defined on a polyhedral partition in the state space. As an important limitation, disturbances may reduce performance of the explicit model predictive control. This paper presents efficient approach for handling the problem of using eMPC for constrained systems with disturbances. It proposes an approach to improve performance of the closed loop system by designing a suitable state and disturbance estimator. Conditions for observability of the disturbances are considered and it is depicted that applying the disturbance’s estimation leads to rejection of the response error. It is also shown that the proposed approach prevents the reduction of feasible space. Simulation results illustrate the advantages of this approach.     

X-ray Photoelectron Spectroscopy of Cadmium Tin Oxide Ceramics in As-Fired and Electrochemically Reduced Forms

X-ray photoelectron spectroscopy (XPS) has been employed to investigate the chemical nature of samples of dicadmium stannate (Cd₂SnO₄) in the as-fired, electrochemically reduced, and reoxidized states. The reduction of Cd₂SnO₄ was found to be associated with a dramatic color change from bright yellow to dark green, a phenomenon commonly known as the electrochromic effect. Both quantitative XPS results and binding energy measurements proved that, upon exposure of the reduced ceramic bodies to air, the Sn²⁺ to Sn⁴⁺ transition readily took place to produce the intermediate compound, Cd₂SnO₃ with divalent tin. Prolonged exposure to the atmosphere did not result in further progress of reoxidation extending to monovalent cadmium. However, complete reoxidation of the reduced samples was possible by annealing in air at 350°C for a short period of time, e.g., 3 h, by which the original features of the as-fired state such as color and electrical conductivity were restored. The results also showed that reoxidized samples at high temperature assume the same XPS characteristics as those of as-fired ceramics.     

“How do you know that I don’t understand?” A look at the future of intelligent tutoring systems

Many software systems would significantly improve performance if they could adapt to the emotional state of the user, for example if Intelligent Tutoring Systems (ITSs), ATM’s, ticketing machines could recognise when users were confused, frustrated or angry they could guide the user back to remedial help systems so improving the service. Many researchers now feel strongly that ITSs would be significantly enhanced if computers could adapt to the emotions of students. This idea has spawned the developing field of affective tutoring systems (ATSs): ATSs are ITSs that are able to adapt to the affective state of students. The term “affective tutoring system” can be traced back as far as Rosalind Picard’s book Affective Computing in 1997.This paper presents research leading to the development of Easy with Eve, an ATS for primary school mathematics. The system utilises a network of computer systems, mainly embedded devices to detect student emotion and other significant bio-signals. It will then adapt to students and displays emotion via a lifelike agent called Eve. Eve’s tutoring adaptations are guided by a case-based method for adapting to student states; this method uses data that was generated by an observational study of human tutors. This paper presents the observational study, the case-based method, the ATS itself and its implementation on a distributed computer systems for real-time performance, and finally the implications of the findings for Human Computer Interaction in general and e-learning in particular. Web-based applications of the technology developed in this research are discussed throughout the paper.