Output feedback controller for polytopic systems exploiting the direct searching of the design space

This paper deals with the problem of designing a robust static output feedback controller for polytopic systems. The current research that tackled this problem is mainly based on LMI method, which is conservative by nature. In this paper, a novel approach is proposed, which considers the design space of the controller parameters and iteratively partitions the space to small simplexes. Then, by assessing the stability in each simplex, the solution space for design parameters is directly determined. It has been theoretically proved that, if there exists a feasible solution in the design space, the algorithm can find it. To validate the result of the proposed approach, comparative simulation examples are given to illustrate the performance of the design methodology as compared to those of previous approaches.     

Response level crossing rate of a linear system excited by a partially specified Gaussian load process

The problem of determining the maximum mean response level crossing rate of a linear system driven by a partially specified Gaussian load process has been considered. The partial specification of the load is given only in terms of its total average energy. The critical input power spectral (PSD) function, which maximizes the mean response level crossing rate, is obtained. The critical input PSD turns out to be highly narrow-banded which fails to capture the erratic nature of the excitation. Consequently, the trade-off curve between the maximum mean response level crossing rate and the maximum disorder in the input process, quantified in terms of its entropy rate, has been generated. The method of Pareto optimization is used to tackle the conflicting objectives of the simultaneous maximization of the mean response level crossing rate and the input entropy rate. The non-linear multi-objective optimization has been carried out using a recently developed multi-criteria genetic algorithm scheme. Illustrative example of determining the critical input of an axially vibrating rod, excited by a partially specified stationary Gaussian load process, has been considered.     

Additive manufacturing in the spare parts supply chain

As additive manufacturing (AM) evolves to become a common method of producing final parts, further study of this computer integrated technology is necessary. The purpose of this research is to evaluate the potential impact of additive manufacturing improvements on the configuration of spare parts supply chains. This goal has been accomplished through scenario modeling of a real-life spare parts supply chain in the aeronautics industry. The spare parts supply chain of the F-18 Super Hornet fighter jet was selected as the case study because the air-cooling ducts of the environmental control system are produced using AM technology. In total, four scenarios are investigated that vary the supply chain configurations and additive manufacturing machine specifications. The reference scenario is based on the spare parts supplier's current practice and the possible future decentralization of production and likely improvements in AM technology. Total operating cost, including downtime cost, is used to compare the scenarios. We found that using current AM technology, centralized production is clearly the preferable supply chain configuration in the case example. However, distributed spare parts production becomes practical as AM machines become less capital intensive, more autonomous and offer shorter production cycles. This investigation provides guidance for the development of additive manufacturing machines and their possible deployment in spare parts supply chains. This study contributes to the emerging literature on AM deployment in supply chains with a real-world case setting and scenario model illustrating the cost trade-offs and critical requirements for technology development.     

Tough Transient Ionic Junctions Printed with Ionic Microgels

Emerging soft ionotronics better match the human body mechanically and electrically compared to conventional rigid electronics. They hold great potential for human-machine interfaces, wearable and implantable devices, and soft machines. Among various ionotronic devices, ionic junctions play critical roles in rectifying currents as electrical p–n junctions. Existing ionic junctions, however, are limited in electrical and mechanical performance, and are difficult to fabricate and degrade. Herein, the design, fabrication, and characterization of tough transient ionic junctions fabricated via 3D ionic microgel printing is reported. The 3D printing method demonstrates excellent printability and allows one to fabricate ionic junctions of various configurations with high fidelity. By combining ionic microgels, degradable networks, and highly charged biopolymers, the ionic junctions feature high stretchability (stretch limit 27), high fracture energy (>1000 Jm⁻²), excellent electrical performance (current rectification ratio >100), and transient stability (degrade in 1 week). A variety of ionotronic devices, including ionic diodes, ionic bipolar junction transistors, ionic full-wave rectifiers, and ionic touchpads are further demonstrated. This study merges ionotronics, 3D printing, and degradable hydrogels, and will motivate the future development of high-performance transient ionotronics.     

Complexity and design of QoS routing algorithms in wireless mesh networks

Quality of service (QoS) provisioning in wireless mesh networks (WMNs) is an open issue to support emerging multimedia services. In this paper, we study the problem of QoS provisioning in terms of end-to-end bandwidth allocation in WMNs. It is challenging due to interferences in the networks. We consider widely used interference models and show that except a few special cases, the problem of finding a feasible path is NP-complete under the models. We propose a k-shortest path based algorithmic framework to solve this problem. We also consider the problem of optimizing network performance by on-line dynamic routing, and adapt commonly used conventional QoS routing metrics to be used in WMNs. We find the optimal solutions for these problems through formulating them as optimization models. A model is developed to check the existence of a feasible path and another to find the optimal path for a demand; moreover, an on-line optimal QoS routing algorithm is developed. Comparing the algorithms implemented by the proposed framework with the optimization models shows that our solution can find existing feasible paths with high probability, efficiently optimizes path lengths, and has a comparable performance to the optimal QoS routing algorithm. Furthermore, our results show that contrary to wireline networks, minimizing resource consumption should be preferred over load distribution even in lightly loaded WMNs.     

Predicting Organizational Success within a Project-Based Joint Venture Alliance

Project-based joint ventures (a special type of alliance) are an often-used method to form competitive organizational structures in the global market; they allow participants to quickly assemble project-needed assets on a short-term basis without substantial investment. However, published discussions of joint ventures describe mixed success and focus on factors that affect the ventures after they are formed. This paper exposes factors, which may be observed at joint venture inception, that are predictive of organizational success within the joint venture. The survey research of U.S. architecture/engineering/construction (A/E/C) firms indicates that smaller partners in a joint venture experience more market growth and are more successful. Also, a firm with strength in legitimacy (client trust) is more likely to gain in short-term income but will likely suffer some long-term market loss in comparison to its less-legitimized partners. It is further concluded that culture match among partners plays a significant role in ensuring profitable joint venture returns.     

Accelerating protein release from microparticles for regenerative medicine applications

There is a need to control the spatio-temporal release kinetics of growth factors in order to mitigate current usage of high doses. A novel delivery system, capable of providing both structural support and controlled release kinetics, has been developed from PLGA microparticles. The inclusion of a hydrophilic PLGA–PEG–PLGA triblock copolymer altered release kinetics such that they were decoupled from polymer degradation. A quasi zero order release profile over four weeks was produced using 10% w/w PLGA–PEG–PLGA with 50:50 PLGA whereas complete and sustained release was achieved over ten days using 30% w/w PLGA–PEG–PLGA with 85:15 PLGA and over four days using 30% w/w PLGA–PEG–PLGA with 50:50 PLGA. These three formulations are promising candidates for delivery of growth factors such as BMP-2, PDGF and VEGF. Release profiles were also modified by mixing microparticles of two different formulations providing another route, not previously reported, for controlling release kinetics. This system provides customisable, localised and controlled delivery with adjustable release profiles, which will improve the efficacy and safety of recombinant growth factor delivery.