Study of 18-cm long single-sided AC-coupled silicon microstripdetectors

The SSC GEM silicon Central Tracker design incorporated 18-cm long single-sided AC-coupled silicon microstrip ladders. Compared to the 12-cm long ladders considered in the preliminary stages of the tracker design, the 18-cm long ladders have the advantage of reduced cost, channel count and overall power consumption, and led to a simplified tracker assembly. However, such long ships also present the challenge of maintaining satisfactory performance. The increased capacitance and series resistance contribute to lower signal-to-noise ratios, longer time walk, higher power consumption per channel and increased probability of crosstalk to neighboring channels. In this paper, an accurate method to calculate the geometric capacitance of the AC-coupled microstrips is presented and the calculated results are compared with measurements, SPICE simulations are performed to predict the noise, the extent of interstrip capacitive coupling and the dispersion of the detector signal due to the finite series resistance of the metal strips and the long length of the detector. The influence of the preamplifier current and the shaping time on the signal and noise levels is also presented. The study concludes that the 18-cm long ladders can successfully satisfy the performance goals of the GEM silicon Central Tracker     

Extending typestate checking using conditional liveness analysis

The authors present a practical extension to typestate checking, which is capable of proving programs free of uninitialized variable errors even when these programs contain conditionally initialized variables where the initialization of a variable depends upon the equality of one or more tag variables to a constant. The user need not predeclare the relationship between a conditionally initialized variable and its tags, and this relationship may change from one point in the program to another. The technique generalizes liveness analysis to conditional liveness analysis. Like typestate checking, this technique incorporates a dataflow analysis algorithm in which each point in a program is labeled with a lattice point describing statically tracked information, including the initialization of variables. The labeling is then used to check for programming errors such as referencing a variable which may be uninitialized     

Isoseparation curves: a mechanism for optimizing off-axis dose homogeneity of intact breast irradiation

The purpose of this paper is to determine whether using off-axis isoseparation curves to optimize the collimator rotation angle improves dose homogeneity. Eleven intact breast irradiation patients underwent computerized tomography (CT) treatment planning with 1 cm abutting slices. Central plane treatment planning, using 6 MV photons, tissue inhomogeneity corrections, and isocentric opposed tangent treatment fields, was performed. Collimators were rotated to match chest wall slope through the use of a beam's-eye-view setting. Patient separations were measured from the apex of the breast to the posterior field border on each axial CT slice. Sagittal-plane isoseparation curves were constructed from these measurements. Using these curves, the collimator rotation that minimized off-axis separation differences was determined. A comparison of off-axis dose inhomogeneity was performed for patients with a > or =10 degrees difference between this optimized collimator angle and the angle determined by chest wall slope. These comparative treatment plans differed only with respect to collimator angle rotation. The mean optimal collimator rotation angle differed significantly from the mean rotation angle which matched the chest wall slope (5.4 degrees vs. 11 degrees, respectively, P < 0.001). Four of the 11 patients had rotation angle differences of 10 degrees. In these patients, the optimization of collimator angle reduced the percentage of breast volume to "that" received > or =110% of the prescribed dose. For the patient with the largest breast size to the patient with the smallest breast size the decreases were, respectively, 5% (15% to 10%), 3% (24% to 21%), 1% (4% to 3%), and 1% (0.9% to 0%). The mean reduction in dose inhomogeneity was greatest in the inferior breast quadrants. At 6 cm and 4 cm off axis, the mean reductions in the percentages of the breast tissue to "that" received 110% of the prescribed dose were respectively 15.1% and 5.3 %. Optimizing the collimator angle through the use of isoseparation curves decreases dose inhomogeneity. The greatest improvements are in the inferior quadrants of the intact breast. The improved dose homogeneity may have clinical relevance in the treatment of patients with large breast sizes.     

Microforms in Gravel Bed Rivers: Formation, Disintegration, and Effects on Bedload Transport

This research aims to advance current knowledge on cluster formation and evolution by tackling some of the aspects associated with cluster microtopography and the effects of clusters on bedload transport. The specific objectives of the study are (1) to identify the bed shear stress range in which clusters form and disintegrate, (2) to quantitatively describe the spacing characteristics and orientation of clusters with respect to flow characteristics, (3) to quantify the effects clusters have on the mean bedload rate, and (4) to assess the effects of clusters on the pulsating nature of bedload. In order to meet the objectives of this study, two main experimental scenarios, namely, Test Series A and B (20 experiments overall) are considered in a laboratory flume under well-controlled conditions. Series A tests are performed to address objectives (1) and (2) while Series B is designed to meet objectives (3) and (4). Results show that cluster microforms develop in uniform sediment at 1.25 to 2 times the Shields parameter of an individual particle and start disintegrating at about 2.25 times the Shields parameter. It is found that during an unsteady flow event, effects of clusters on bedload transport rate can be classified in three different phases: a sink phase where clusters absorb incoming sediment, a neutral phase where clusters do not affect bedload, and a source phase where clusters release particles. Clusters also increase the magnitude of the fluctuations in bedload transport rate, showing that clusters amplify the unsteady nature of bedload transport. A fourth-order autoregressive, autoregressive integrated moving average model is employed to describe the time series of bedload and provide a predictive formula for predicting bedload at different periods. Finally, a change-point analysis enhanced with a binary segmentation procedure is performed to identify the abrupt changes in the bedload statistic characteristics due to the effects of clusters and detect the different phases in bedload time series using probability theory. The analysis verifies the experimental findings that three phases are detected in the bedload rate time series structure, namely, sink, neutral, and source.     

Mechanical stability of the interface between a padded slider and magnetic recording disk

Contact state, friction, and meniscus load between a padded slider and a smooth disk are discrete; friction is determined by the number of pads in contact and the meniscus load acting at each pad. By inducing frictional changes through varying sliding direction, we force the slider from one stable state to another and infer which pads are in contact from the corresponding changes in friction. We find the stability of a given contact state is influenced by friction coefficient, pad location, meniscus load, applied mechanical loads and applied moments. A model is proposed to account for these effects.     

Combined costimulation blockade plus rapamycin but not cyclosporine produces permanent engraftment

BACKGROUND: Combined treatment of allograft recipients with anti-CD40 ligand and CTLA-4Ig (costimulation blockade) is a powerful promising albeit not consistently tolerizing therapy. It would be desirable to use an effective conventional immunosuppressive regimen in low doses or for a short course as an adjunct; however, cyclosporine treatment drastically blunts the ability of costimulation blockade to produce long-term engraftment. METHODS: Short courses of cyclosporine or rapamycin were compared as adjuncts to costimulation blockade in the murine BALB/c to C3H/He heterotopic cardiac allograft model. RESULTS: Although cyclosporine therapy blocked the capacity of costimulation blockade to produce permanent engraftment, combined rapamycin and costimulation blockade treatment produced permanent engraftment. CONCLUSION: A theoretical basis for the differing effects of cyclosporine and rapamycin upon the outcome of costimulation blockade is forwarded. Combined use of costimulation blockade and rapamycin may provide a means to bring costimulation blockade into the clinic.     

Analysis of three restriction fragment length polymorphisms in the human type II procollagen gene

Cloned genomic DNA sequences corresponding to various regions of the human type II procollagen gene were used to analyze the DNA from 78 normal volunteers. Southern hybridization experiments detected polymorphic HindIII, BamHI, and EcoRI sites. The presence of the polymorphic HindIII site results in a 7.0-kilobase (kb) band, and the absence of this site results in a 14.0-kb band. When present, the BamH1 polymorphic site yields a 4.8-kb band, and when absent, yields a 7.2-kb band. The presence of the EcoRI polymorphic site results in a 3.7-kb band, and its absence results in a 7.0-kb band. Each polymorphic site was mapped. Analyses of the data demonstrated that the sites are present in overall gene frequencies of .39 for HindIII, .04 for BamHI, and .02 for EcoRI. Gene frequencies of the polymorphic sites were also studied with respect to race. The polymorphic sites are present in a Hardy-Weinberg distribution in the study population. Study of an extended family demonstrated that the segregation of the HindIII polymorphic site is consistent with Mendelian inheritance.     

The TASSO vertex detector

The design, construction and performance of a small pressurized drift chamber of low mass and high wire density is described. The chamber forms part of the TASSO experiment at the PETRA e⁺e⁻ storage ring of the DESY Laboratory. First physics results obtained with the chamber are also briefly discussed.     

Indentation toughness of Mo5Si3—based alloys

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｄｅｍａｎｄｓｆｏｒｈｉｇｈｅｒｅｆｆｉｃｉｅｎｃｙｏｆｅｎｅｒｇｙｃｏｎ ｖｅｒｔｉｎｇｓｙｓｔｅｍｓｎｅｃｅｓｓｉｔａｔｅｓｆｏｒｔｈｅｍａｘｉｍｕｍｏｐｅｒａｔ ｉｎｇｔｅｍｐｅｒａｔｕｒｅｔｏｂｅｉｎｃｒｅａｓｅｄ .