A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Kinetic,thermodynamic parameters and in vitro digestion of tannase from Aspergillus tamarii URM 7115

Tannase is an enzyme used in various industries and produced by a large number of microorganisms. The aim of this study was to evaluate tannase production to determine the biochemical, kinetic, and thermodynamic properties and to simulate tannase in vitro digestion. The tannase-producing fungal strain was isolated from “jamun” leaves and identified as Aspergillus tamarii. Temperature at 26°C for 67?h was the best combination for maximum tannase activity (6.35-fold; initial activity in Plackett–Burman design—15.53?U/mL and average final activity in Doehlert design—98.68?U/mL). The crude extract of tannase was optimally active at 40°C, pH 5.5 and 6.5. Moreover, tannase was stimulated by Na⁺, Ca²⁺, Mg²⁺, and Mn²⁺. The half-life at 40°C lasted 247.55?min. The free energy of Gibbs, enthalpy, and entropy, at 40°C, was 81.47, 16.85, and ?0.21?kJ/mol?·?K, respectively. After total digestion, 123.95% of the original activity was retained. Results suggested that tannase from A. tamarii URM 7115 is an enzyme of interest for industrial applications, such as gallic acid production, additive for feed industry, and for beverage manufacturing, due to its catalytic and thermodynamic properties.     

Photo-Fenton removal of water-soluble polymers

This paper presents the results of experiments carried out in a laboratory-scale photochemical reactor on the photodegradation of different polymers in aqueous solutions by the photo-Fenton process. Solutions of three polymers, polyethyleneglicol (PEG), polyacrylamide (PAM), and polyvinylpyrrolidone (PVP), were tested under different conditions. The reaction progress was evaluated by sampling and analyzing the total organic carbon concentration in solution (TOC) along the reaction time. The behavior of the different polymers is discussed, based on the evolution of the TOC–time curves. Under specific reaction conditions, the formation and coalescence of solid particles was visually observed. Solids formation occurred simultaneously to a sharp decrease in the TOC of the liquid phase. This may be favorable for the treatment of industrial wastewater containing polymers, since the photodegradation process can be coupled with solid separation systems, which may reduce the treatment cost.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

Epithelioid sarcoma: a clinicopathologic review of 55 cases

OBJECTIVE: To identify any clinical and pathologic features of treatment modalities that are predictive of outcome in patients with epithelioid sarcoma, a rare slow-growing soft tissue tumor most commonly occurring in the distal extremities of young adults. DESIGN: We reviewed the institutional files for cases of epithelioid sarcoma for the period 1956 to 1991 and analyzed the effect of various factors on survival. MATERIAL AND METHODS: Fifty-five cases of epithelioid sarcoma were found, and the relevant clinical, pathologic, treatment, follow-up, and outcome features were assessed. RESULTS: All tumors were treated initially by operative resection. The recurrence rate progressively decreased with increasing aggressiveness of the initial operation; however, no difference was noted in metastatic rate. Overall, the recurrence rate was 38% and the metastatic rate was 47%. At the end of a mean follow-up of 102 months, 69% of patients had no evidence of disease, 27% had died of the disease, and 4% were alive with disease. Increasing tumor size, necrosis of more than 30%, and vascular invasion correlated significantly with a worse prognosis. CONCLUSION: Epithelioid sarcoma should be considered a malignant neoplasm with a significant potential for aggressive behavior, and close follow-up of affected patients should be maintained for many years. Initial treatment should be aggressive in an attempt to prevent recurrence.     

p53 expression in neurofibroma and malignant peripheral nerve sheath tumor. An immunohistochemical study of sporadic and NF1-associated tumors

OBJECTIVES--(1) to evaluate regional cerebral blood flow (rCBF) with single photon emission computed tomography and 99mTc-hexamethylpropyleneamine oxime in patients with the idiopathic adult hydrocephalus syndrome (IAHS); (2) to examine regional cerebral blood flow (rCBF), gait, and psychometric functions before and after CSF removal (CSF tap test); (3) to assess abnormalities in subcortical white matter by MRI. METHODS--Thirty one patients fulfilling the criteria for IAHS (according to history and clinical and neuroradiological examination) were studied. Quantified gait measurements, psychometric testing, and rCBF before and after removal of CSF were obtained. Pressure of CSF and CSF outflow conductance were investigated with a constant pressure infusion method. Brain MRI was used to quantify the severity of white matter lesions and periventricular hyperintensities. In IAHS a widespread rCBF hypoperfusion pattern was depicted, with a caudal frontal and temporal grey matter and subcortical white matter reduction of rCBF as the dominant feature. Removal of CSF was not accompanied by a concomitant increase in rCBF. Significant white matter lesions were detected only in a minority of patients by MRI. An altered CSF hydrodynamic state with a higher CSF pressure and lower conductance was confirmed. IAHS is characterised by an abnormal CSF hydrodynamic state, associated with a widespread rCBF reduction with preference for subcortical white matter and frontal-temporal cortical regions. Furthermore in most patients MRI did not show white matter changes suggestive of a coexistent subcortical arteriosclerotic encephalopathy. At least in the idiopathic group of patients with AHS, measurements of rCBF before and after temporary relief of the CSF hydrodynamic disturbance will not provide additional information that would be helpful in the preoperative evaluation but is suggestive of a preserved autoregulation of rCBF.     

A fuzzy queue-aware routing approach for wireless mesh networks

Recent advances in Wireless Mesh Networks (WMNs) have overcome the drawbacks of traditional wired and ad-hoc networks and now they are seen as a means of allowing last mile communications with quality level assurance in Future Multimedia Systems. However, new routing schemes are needed to provide end-to-end Quality of Service (QoS) and Quality of Experience (QoE) support for delay/loss/jitter-sensitive multimedia applications. The well-known OLSR (Optimized Link State Routing) protocol with ETX (Expected Transmission Count) metric brings many benefits to the path selection process, but has a drawback with regard to queue availability management, which reduces the system performance. This problem is caused when OLSR-EXT control messages are exchanged and the queues of mesh routers along the end-to-end communication path are overloaded. As a result, multimedia-related packets will suffer from loss/delay/jitter and the overall system performance will decrease. This paper proposes the Optimized Link State Routing-Fuzzy ETX Queue (OLSR-FEQ) protocol to overcome the limitations of OLSR-ETX regarding queue availability, QoS and QoE assurance. OLSR-FEQ optimizes network and user-based parameters by coordinating queue availability, QoS and fuzzy issues in the routing decision process as a way of allocating the best paths for multimedia applications. Performance evaluations were carried out with the Network Simulator (NS-2.34) to show the benefits of the proposed solution when compared with existing routing schemes, namely OLSR-ETX, OLSR-FLC, OLSR-MD and HWMP (IEEE 802.11s standard), regarding QoS (unsuccessful packet delivery and throughput) and QoE (PSNR, SSIM, VQM and MOS) parameters.     

Water flux,DSC, and cytotoxicity characterization of membranes of cellulose acetate produced from sugar cane bagasse,using PEG 600

Summary In this article, cellulose acetate produced through the homogeneous acetylation of sugar cane bagasse cellulose was used to produce membranes, using poly(ethyleneglycol) 600 (PEG 600) as an admixture. The membranes were characterized using water flux measurements (Payne’s cup), differential scanning calorimetry (DSC) and neutral red uptake (cytotoxicity). The results showed that PEG 600 acts as a crystallinity inductor and/or pore former in the cellulose acetate matrix. The induction of crystallinity is important for this system since it had not been reported on the literature yet. The results also demonstrated that the studied membranes present a nontoxic behavior.     

How can Cleaner Production practices contribute to meet ISO 14001 requirements? Critical analysis from a survey with industrial companies

The companies’ needs to adopt changes in their way of production to maximize the environmental performance required by their stakeholders, and at the same time, to maximize their economic and market performance, have made them seek for environmental strategies and certifications. In this sense, the Cleaner Production and the Environmental Management System based on ISO 14001 have been, respectively, presented, since the main objective of this research is to identify and analyze Cleaner Production contributions to comply with ISO 14001 requirements. For such, a survey research has been carried out in Brazilian industrial companies certified by ISO 14001. We have identified the main performance factors by leading practices and variables of Cleaner Production that contribute to the compliance with the standard requirements by companies. Thus, it has been noted that Cleaner Production is an important strategy for the preparation of companies for certification as well as for improving their environmental performance.