A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Current advances concerning the most cited metal ions doped bioceramics and silicate-based bioactive glasses for bone tissue engineering

Studies related to biomaterials that stimulate the repair of living tissue have increased considerably, improving the quality of many people's lives that require surgery due to traumatic accidents, bone diseases, bone defects, and reconstructions. Among these biomaterials, bioceramics and bioactive glasses (BGs) have proved to be suitable for coating materials, cement, scaffolds, and nanoparticles, once they present good biocompatibility and degradability, able to generate osteoconduction on the surrounding tissue. However, the role of biomaterials in hard tissue engineering is not restricted to a structural replacement or for guiding tissue regeneration. Nowadays, it is expected that biomaterials develop a multifunctional role when implanted, orchestrating the process of tissue regeneration and providing to the body the capacity to heal itself. In this way, the incorporation of specific metal ions in bioceramics and BGs structure, including magnesium, silver, strontium, lithium, copper, iron, zinc, cobalt, and manganese are currently receiving enhanced interest as biomaterials for biomedical applications. When an ion is incorporated into the bioceramic structure, a new category of material is created, which has several unique properties that overcome the disadvantages of primitive material and favors its use in different biomedical applications. The doping can enhance handling properties, angiogenic and osteogenic performance, and antimicrobial activity. Therefore, this review aims to summarize the effect of selected metal ion dopants into bioceramics and silicate-based BGs in bone tissue engineering. Furthermore, new applications for doped bioceramics and BGs are highlighted, including cancer treatment and drug delivery.     

The use of recycled low-density polyethylene films from protective prepreg for the development of nanocomposites with bentonite clay

Prepreg is a pre-impregnated composite fiber where a thermoset polymer matrix material is present. Before being used, these materials are kept at low temperatures and have a low-density polyethylene (LDPE) film for your protection. The increase in the use of structural composites based on prepregs causes an increase in the amount of protective LDPE film. This material is usually discarded or incinerated and can cause great damage to the environment. Thus, the present work aimed to study the feasibility of recycling up to 100% of protective LDPE (rLDPE) to develop blends-based nanocomposites with rLDPE/virgin LDPE (60/40, 70/30, 80/20, 90/10 and 100/0) with the addition of 5 wt% of compatibilizer agent (maleic anhydride grafted LDPE, LDPE-g-MA), and 1 wt% of bentonite (BNT) using a co-rotational twin-screw extruder, followed by hot pressing in a hydropneumatic press and die-cutting. Water absorption test, thermal aging resistance, morphological characterization by scanning electron microscopy, mechanical properties by Izod impact strength and tensile tests, and differential scanning calorimetry were performed. By the results, it was possible to verify the viability of 100% of the recycling of rLDPE. The results showed a good distribution of 1 wt% of BNT in the matrix, better mechanical properties when compared with virgin LDPE. Furthermore, the thermal properties, water absorption test, and thermal aging resistance showed no statistical differences between the samples. These results confirm the effectiveness and the environmental gain in the use of the recycled material.     

Prediction and comparison of textural properties of magnetic copolymer supports for enzyme immobilization

Magnetic polymers supports have proven to be valuable materials for enzyme immobilization, as they allow recovering the catalyst by magnetic separation, precluding the need for costly and time-consuming separation steps. In this study, magnetic copolymer supports were synthesized using styrene (STY) and different crosslinking agents (divinylbenzene, ethylene glycol dimethacrylate, or triethylene glycol dimethacrylate) and initiators (azobisisobutyronitrile or benzoyl peroxide) and used to immobilize Candida antarctica lipase B (CALB). The aim was to obtain biocatalysts with high enzymatic activity and satisfactory morphological properties for use in biotransformation reactions. Two morphological properties known to influence the immobilization yield were taken into consideration, specific surface area, and swelling index. Experimental data were compared to the predictions of a model based on molar balance, method of moments, numerical fractionation, and elementary gel structures. The high correlation (R² = 0.9974) between experimental and predicted values demonstrated the suitability of the model for estimating the textural properties of enzyme supports. CALB was successfully immobilized, showing high hydrolytic activity (500–700 U g⁻¹) and good thermal stability at 50°C. CALB/STY-EGDMA-M was 14 times more stable than free CALB. The results confirm the efficiency of the immobilization method and the suitability of the copolymers for enzyme immobilization.     

Influence of the chemical structure of additives poly(ethylene-co-vinyl acetate)-based on the pour point of crude oils

One of the methods to prevent wax precipitation, during petroleum production, transport, and refining, is the use of polymer additives that can reduce the oil pour point. However, no single additive work for all types of crude oil and this relation is not yet well known. In this study, a family of polymers based on poly(ethylene-co-vinyl acetate), containing hydroxyl groups and long pendant hydrocarbon chains (from C6 to C18), were synthesized and characterized by H¹ nuclear magnetic resonance and solubility test. Four crude oil samples containing different amounts and size distribution of the wax were used. The additive's action is favored by higher contents of iso + cycloalkanes and lower contents of n-paraffins with larger chain sizes. The presence of the CH₃COO group in the copolymers promoted the lowering of the pour point, supported by a low OH concentration and the presence of a long pendant hydrocarbon chain: the best results were obtained with C10 and C12 chain lengths. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48969.     

Synthesis of Isopropyl Palmitate by Lipase Immobilized on a Magnetized Polymer Matrix

Penicillium camemberti lipase immobilized on a magnetized poly(styrene-co-divinylbenzene) was used as a biocatalyst for isopropyl palmitate synthesis. The reaction conditions were determined by 2² factorial central composite design. A mathematical model based on a simplified kinetic approach was developed to describe the system and validated with the experimental data. An assay carried out in a stirred-tank reactor confirmed the proposed model. The ester was purified and the properties such as density and water content were similar to those found in commercially available isopropyl palmitate.     

Changes in actin and tubulin expression in osteogenic cells cultured on bioactive glass‐based surfaces

The present study evaluated whether the changes in the labeling pattern of cytoskeletal proteins in osteogenic cells cultured on bioactive glass‐based materials are due to altered mRNA and protein levels. Primary rat‐derived osteogenic cells were plated on Bioglass® 45S5, Biosilicate®, and borosilicate (bioinert control). The following parameters were assayed: (i) qualitative epifluorescence analysis of actin and tubulin; (ii) quantitative mRNA and protein expression for actin and tubulin by real‐time PCR and ELISA, respectively, and (iii) qualitative analysis of cell morphology by scanning electron microscopy (SEM). At days 3 and 7, the cells grown on borosilicate showed typical actin and tubulin labeling patterns, whereas those on the bioactive materials showed roundish areas devoid of fluorescence signals. The cultures grown on bioactive materials showed significant changes in actin and tubulin mRNA expression that were not reflected in the corresponding protein levels. A positive correlation between the mRNA and protein as well as an association between epifluorescence imaging and quantitative data were only detected for the borosilicate. SEM imaging of the cultures on the bioactive surfaces revealed cells partly or totally coated with material aggregates, whose characteristics resembled the substrate topography. The culturing of osteogenic cells on Bioglass® 45S5 and Biosilicate® affect actin and tubulin mRNA expression but not the corresponding protein levels. Changes in the labeling pattern of these proteins should then be attributed, at least in part, to the presence of a physical barrier on the cell surface as a result of the material surface reactions, thus limiting fluorescence signals. Microsc. Res. Tech. 78:1046–1053, 2015. © 2015 Wiley Periodicals, Inc.