Protective effect of phytic acid hydrolysis products on iron-induced lipid peroxidation of liposomal membranes

Beneficial effects of dietary phytic acid (myo-inositol hexaphosphate; IP₆) have often been explained by its strong iron ion-chelating ability, which possibly suppresses iron ion-induced oxidative damage in the gastrointestinal tract. Because phytic acid is hydrolyzed during digestion, this work aimed to know whether its hydrolysis products (IP_2′ IP_3′, IP_4′ and IP₅) could still prevent iron ion-induced lipid peroxidation. Studies using liposomal membranes demonstrated that hydrolysis products containing three or more phosphate groups are able to inhibit iron ion-induced lipid peroxidation although their effectiveness decreased with dephosphorylation. Similarly, they also prevented iron ion-induced decomposition of phosphatidylcholine hydroperoxide. These results demonstrate that intermediate products of phytic acid hydrolysis still possess iron ion-chelating ability, and thus they can probably prevent iron ion-induced lipid peroxidation in biological systems.     

Relationship between oxidative stability of vitamin E and production of fatty acids in oils during microwave heating

Effects of microwave heating on the oxidative stability ofd-tocopherols were studied in relation to the production of fatty acids in oils. During microwave heating, the stability of tocopherols decreased in the orderδ>β>γ>α. This order did not depend on the types of ethyl esters of fatty acids or oils present. But, the shorter the chainlength and the lower the degree of unsaturation of the fatty acid ethyl esters, the greater was the reduction in amount of individual tocopherols. A similar tendency was observed when tocopherol-stripped vegetable oils, with equimolar mixtures of tocopherols added, were treated under the same conditions. The reduction in tocopherols became greater with increasing levels of free fatty acids.     

Grain Refinement by Cyclic Displacive Forward/Reverse Transformation in Fe-High-Ni Alloys

A novel method for grain refinement of martensite structures was proposed, in which transformation strain is accumulated by cyclic displacive forward and reverse transformations. This method can refine martensite structures in an Fe-18Ni alloy because a high density of austenite dislocations is introduced by a displacive reverse transformation in addition to an inheritance of dislocations in body-centered cubic martensite into austenite during cyclic transformation. The addition of a small amount of carbon accelerates structure refinement significantly, which results in the formation of ultra-fine-grained structures after ten cycles.

     

Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.     

Evaluation of indoor gamma radiation dose in dwellings

The use of materials containing naturally occurring radionuclides for house construction may enhance the natural radiation background to which some population groups are exposed. External exposure results from gamma emitter radionuclides existing in the walls, floor and ceiling. Mathematical models can be used to predict external dose rates inside a room, provided the compartment geometry and the radionuclide concentration activities are known. This paper presents a methodology and a computer code for theoretical evaluation of indoor external gamma doses in the air. The room was modelled as three pairs of rectangular slabs of finite thickness. Doses were evaluated by applying a photon transport model, taking into account self-absorption and radiation build-up. Calculations were performed for 40K, 226Ra and 232Th, considering concrete walls. The results obtained show good agreement with those reported in the literature. Dose conversion factors are presented in a practical manner, ready to use for radiological impact screening.     

Electron diffraction study of flake graphite extracted from molten pig iron

Single graphite flakes segregated from molten carbon or silicon-rich iron at 1200° to 1500°C were subjected to electron diffraction experiments. The results indicated that the well developed thick flakes are composed of one single crystal, while the thin almost colorless flakes consist of two or three single crystals oriented with the basal plane parallel to the flake surface and rotated at an angle of 15°, 18°, 22°, 25° or 28° about the C-axis. The stacking of the atomic layers in each single crystal indicates that they are α and β-type, or a more disordered structure, at each instant. Double diffraction evidence and additional electron microdiffraction observations showed that the thin single flake has an aggregate structure with two close-packed single crystals.     

Numerical simulation on the behavior of a liquid jet into an air flow

A numerical simulation has been performed to clarify the effects of turbulence in a liquid on the deformation of the liquid jet surface into an air flow. The turbulences in the liquid jet were simulated by the Rankin vortices, and the liquid jet surface was tracked numerically by the volume of fluid method. By numerical simulations, the onset of the protrusions on the liquid jet surface is caused by the vortices in the liquid, and the surrounding air flow plays an important role in the amplification of the protrusions. The amplification rate of the trough displacement is proportional to the air‐to‐liquid velocity ratio. At large imposed vortex intensities, the trough displacement increases with the vortex intensity. On the other hand, at small imposed vortex intensities, the amplification of the trough displacement is also affected by factors other than vortex intensity. © 2001 Scripta Technica, Heat Trans Asian Res, 30(6): 473–484, 2001