Characterization of barley straw biochar produced in various temperatures and its effect on lead and cadmium removal from aqueous solutions

Conversion of agricultural wastes into a carbon rich material (i.e. biochar) using pyrolysis process could be an appropriate approach for their management. This study was carried out to convert barley straw to biochar in different temperatures (300, 400 and 500°C) and to investigate the potential of the produced biochar as a sorbent of heavy metals (Pb and Cd). Considering the pretest results of Pb and Cd sorption, the biochar produced at 500°C (BS500) was selected to find effect of pH, the sorbent dose, the initial concentration of Pb and Cd and the contact time on metal removal efficiency. The results showed that the optimum conditions of adsorption were pH = 6, the sorbent dose 1 g/L and the contact time of 45 min. The adsorption kinetics and isotherms had the best fit to the pseudo‐second order and Langmuir models, respectively.     

Removal of organic pollutants from produced water by batch adsorption treatment

This paper studied the adsorption of chemical oxygen demand (COD), oil and turbidity of the produced water (PW) which accompanies the production and reconnaissance of oil after treating utilizing powdered activated carbon (PAC), clinoptilolite natural zeolite (CNZ) and synthetic zeolite type X (XSZ). Moreover, the paper deals with the comparison of pollutant removal over different adsorbents. Adsorption was executed in a batch adsorption system. The effects of adsorbent dosage, time, pH, oil concentration and temperature were studied in order to find the best operating conditions. The adsorption isotherm models of Langmuir, Freundlich and Temkin were investigated. Using pseudo-first-order and pseudo-second-order kinetic models, the kinetics of oil sorption and the shift in COD content on PAC and CNZ were investigated. At a PAC adsorbent dose of 0.25 g/100 mL, maximum oil removal efficiencies (99.57, 95.87 and 99.84 percent), COD and total petroleum hydrocarbon (TPH) were identified. Moreover, when zeolite X was used at a concentration of 0.25 g/100 mL, the highest turbidity removal efficiency (99.97%) was achieved. It is not dissimilar to what you would get with PAC (99.65 percent). In comparison with zeolites, the findings showed that adsorption over PAC is the most powerful method for removing organic contaminants from PW. In addition, recycling of the consumed adsorbents was carried out in this study to see whether the adsorbents could be reused. Chemical and thermal treatment will effectively regenerate and reuse powdered activated carbon and zeolites that have been eaten.

Graphic abstract

     

Mathematical modeling of hydrogen production using methanol steam reforming in the coupled membrane reactor when the output materials of the reformer section is used as feed for the combustion section

Hydrogen is one of the most abundant elements on Earth's surface. It is not in nature in its pure form, but it can produce by various methods such as methanol steam reforming, partial oxidation, electrolysis, etc. In the present study, using the mass and energy conservation law, hydrogen production in coupled membrane reactors has been modeled using the methanol steam reforming process using two different methods in the coupled membrane reactor. A separate (fresh) methanol is used as feed for the combustion section in the first method. While in the second method, the reformer reactor's output material is used as feed for the combustion section. After simplifying using the required assumptions, the governing equations solved using the ode45 (shooting method) numerical method using MATLAB software. The results of this study show that the conversion of methanol in the coupled membrane reactor when separate methanol is used as feed in the combustion reactor, while in the same reactor, the output material of the reformer section used as feed in the combustion section, is 92% and 88.5% respectively. In this study, the effect of different parameters on the methanol conversion rate is investigated. Finally, it found that with increasing temperature and pressure and decreasing membrane thickness in coupled membrane reactors, methanol conversion rate increases. The percentage of hydrogen recovery in the two coupled membrane reactors is almost equal to 92%.     

Factors influencing adoption of e-payment systems: an empirical study on Iranian customers

Information Systems and e-Business Management - Internet technology has influenced the banking systems because of its capability to enhance performance of financial operations. A major concern of...