Solar-blind ultraviolet photodetector based on Ti-doped Ga2O3/Si p–n heterojunction

A solar-blind ultraviolet photodetector based on Ti-doped Ga₂O₃/Si p–n heterojunction is demonstrated for the first time. It is found that the heterojunction quality forming between Ga₂O₃ and Si becomes better after Ti incorporation in Ga₂O₃. The current–voltage and temporal response measurements show that the detector based on Ti-doped Ga₂O₃/Si p–n heterojunction has a responsivity of 0.382 A/W and a fast rise time of 73 ms as well, which are much better than those undoped Ga₂O₃/Si p–n heterojunction analogues.

     

Assessment and Improvement of IDF Generation Algorithms Used in the IDF_CC Tool

Water Resources Management - Climate change will modify the spatio-temporal variation of hydrological variables worldwide, potentially leading to more extreme events and hydraulic infrastructure...     

Efficient conversion of light paraffinic naphtha to aromatics over metal-modified Mo/MFI catalysts

Journal of Porous Materials - The transformation of light naphtha to value-added aromatic compounds is gaining momentum in the petrochemical industry. In this work, a series of metal modified...     

Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Extraction equilibrium conditions of beryllium and aluminium from a beryl ore for optimal industrial beryllium compound production

This study examines the extraction of beryllium and aluminium from a Nigerian beryl ore using Cyanex®272 in kerosene from an aqueous sulphate pregnant solution. Parameters such as extractant concentration and equilibrium pH that dictates the extraction yield were studied. Under the following conditions: temperature 27?±?2°C, phase ratio 1?1, about 45.50 and 46.76% of beryllium and aluminium were extracted by 0.15?mol?L^?1 Cyanex®272 concentration within 30?min. However, the extraction yield of beryllium and aluminium was increased to 91.68% and 97.89% at equilibrium pH of 3 and 4, respectively, for beryllium and aluminium at 27?±?2°C. A 0.05?mol?L^?1 H₂SO₄ solution was found to be adequate for the stripping of about 99.00% Be and 95.40% Al from the loaded organic phase. The pure solutions containing metal ions were accordingly beneficiated to obtain beryllium and aluminium compounds of industrial values.     

Gold-Nanoparticle-Decorated Metal-Organic Frameworks for Anticancer Therapy

Confinement of Au nanoparticles (NPs) within the porous materials with few nanometers (2-3 nm) has been a well established research area in the past decades in heterogeneous catalysis mainly due to the unique behaviour of Au NPs than its bulk counterpart. In this aspect, Au NPs encapsulated within the pore volumes of metal−organic frameworks (MOFs) have been intensively explored as heterogeneous solid catalysts for wide range of reactions. In recent years, Au NPs confined within the porous MOFs along with the photosensitizer or drug have been effectively used for the treatment of tumor cells through the generation of reactive oxygen species via cascade reactions. This work highlights the benefits of MOFs pores in the preparation of nanomedicine with high efficiency by assembling Au NPs, photosensitizer/drug with the combination of laser either for imaging or treatment of tumor cells. Further, the existing literature is grouped based on the nature of porous materials employed in the preparation of nanomedicine. The final section comments on our view on future developments in the field.     

Microwave bandpass filter by feedback interference topology

This paper proposes a signal feedback interference topology to control the characteristics of a coupled line bandpass filter. Control is carried out by varying the ratio of the transmission line parameters of the forward and the feedback couplers. The topology produces a compact filter that does not require a complicated design or fabrication. The results of the insertion and return losses show that the feedback‐controlled design has desirable features in terms of the design frequency, fractional bandwidth, stopband rejection level, roll‐off rate and insertion loss. The test results of the fabricated prototype achieved good agreement with the simulation results of the ideal transmission line design model. Several microwave, modern wireless and mobile/satellite communication systems may benefit from such a filter design due to its compactness and flexibility.