Unsaturated polyesters. II. Structure and properties of polyester resins based on cinnamylsuccinic acid

Unsaturated Polyester resins were prepared by the reaction of cinnamylsuccinic acid with saturated diols, namely, ethylene, diethylene, propylene, dipropylene, tetramethylene, and hexamethylene glycols, and the unsaturated diols, namely, 1,4-butene- and 1,4-butynediols. All the polyester resins obtained have been characterized and were found to cure with styrene, with relatively low conversions. The properties of the cured polyesters in the form of films were determined. IR and ¹H-NMR spectroscopy were used for both qualitative and quantitative analyses of the polyesters and their hydrolyzate products, after curing with styrene.     

KAFD Arabic font database

Font recognition is useful for improving optical text recognition systems’ accuracy and time, and to restore the documents’ original formats. This paper addresses a need for Arabic font recognition research by introducing an Arabic font recognition database consisting of 40 fonts, 10 sizes (ranging from 8 to 24 points) and 4 styles (viz. normal, bold, italic, and bold–italic). The database is split into three sets (viz. training, validation, and testing). The database is freely available to researchers.¹ Moreover, we introduce a baseline font recognition system for benchmarking purposes, and report identification rates on our KAFD database and the Arabic Printed Text Image (APTI) database with 20 and 10 fonts, respectively. The best recognition rates are achieved using log-Gabor filters.     

Organotin polymers. IV. Binary and ternary copolymerizations of tributyltin acrylate and methacrylate with styrene,allyl methacrylate,butyl methacrylate,butyl acrylate,and acrylonitrile

The monomer reactivity ratios for the copolymerization of tributyltin acrylate with styrene and allyl methacrylate have been found to be r₁ = 0.213, r₂ = 1.910 and r₁ = 0.195, r₂ = 2.257, respectively. Also, the copolymerization parameters of tributyltin methacrylate with styrene and allyl methacrylate were as follows: r₁ = 0.256, r₂ = 1.104 and r₁ = 2.306, r₂ = 1.013. Copolymerization reactions were carried out in solution at 70°C using 1 mole % AIBN, and the copolymer compositions were determined by tin analysis. Ternary copolymerization of the three systems butyl methacrylate–tributyltin methacrylate–acrylonitrile, butyl acrylate–tributyltin methacrylate–acrylonitrile, and styrene–tributyltin acrylate–acrylonitrile have been studied, and the terpolymer composition of each system was determined through tin and nitrogen analyses. The variation of instantaneous and average terpolymer composition with conversion fit satisfactorily the experimental results over a wide range of conversion.     

Effect of diffusional mass transfer on the performance of horizontal subsurface flow constructed wetlands in tropical climate conditions

The effect of mass transfer on the removal rate constants of BOD5, NH3, NO3 and TKN has been investigated in a Horizontal Subsurface Flow Constructed Wetland (HSSFCW) planted with Phragmites mauritianus. The plug flow model was assumed and the inlet and outlet concentrations were used to determine the observed removal rate constants. Mass transfer effects were studied by assessing the influence of interstitial velocity on pollutant removal rates in CW cells of different widths. The flow velocities varied between 3-46 m/d. Results indicate that the observed removal rate constants are highly influenced by the flow velocity. Correlation of dimensionless groups namely Reynolds Number (Re), Sherwood Number (Sh) and Schmidt Number (Sc) were applied and log-log plots of rate constants against velocity yielded straight lines with values beta = 0.87 for BOD5, 1.88 for NH3, 1.20 for NO3 and 0.94 for TKN. The correlation matched the expected for packed beds although the constant beta was higher than expected for low Reynolds numbers. These results indicate that the design values of rate constants used to size wetlands are influenced by flow velocity. This paper suggests the incorporation of mass transfer into CW design procedures in order to improve the performance of CW systems and reduce land requirements.     

Investigating the influence of the counter Si-cell on the optoelectronic performance of high-efficiency monolithically perovskites/silicon tandem cells under various optical sources

Nowadays, tandem structures have become a valuable competitor to conventional silicon solar cells, especially for perovskite over silicon, as metal halides surpassed Si with tunable bandgaps, high absorption coefficient, low deposition, and preparation costs. This led to a remarkable enhancement in the overall efficiency of the whole cell and its characteristics. Consequently, this expands the usage of photovoltaic technology in various fields of applications not only under conventional light source spectrum in outdoor areas, i.e., AM1.5G, but also under artificial light sources found indoors with broadband intensity values, such as Internet of things (IoTs) applications to name a few. We introduce a numerical model to analyze perovskite/Si tandem cells (PSSTCs) using both crystalline silicon (c-Si) and hydrogenated amorphous silicon (a-Si:H) experimentally validated as base cells. All proposed layers have been studied with J-V characteristics and energy band diagrams under AM1.5G by using SCAPS-1D software version 3.7.7. Thereupon, the proposed architectures were tested under various artificial lighting spectra. The proposed structures of Li4Ti5O12/CsPbCl3/MAPbBr3/CH3NH3PbI3/Si recorded a maximum power conversion efficiency (PCE) of 25.25% for c-Si and 17.02% for a-Si:H, with nearly 7% enhancement concerning the Si bare cell in both cases.     

Electrical and spectrophotometric properties of charge transfer complexes of picric acid and some aniline derivatives

The charge transfer complexes produced by the reaction between picric acid and some aniline derivatives were prepared. The prepared charge transfer complexes (CTC) were investigated using infrared and nuclear magnetic resonance spectroscopy aiming to throw more light on their molecular structure. It was proved that a proton transfer interaction takes place between PiOH and x-Ph.NH₂ leading to the formation of PiO^} and x-Ph.NH₃ ⁺ ions. The normal -¹ electronic interaction takes place by transferring an electron from the aniline ring to the picric acid. The semiconducting properties of the CTC were investigated. All the prepared complexes were proved to have a semiconducting character within the temperature range investigated.     

静态安全约束下基于Benders分解算法的可用传输容量计算

在电力市场环境下，可用传输容量(ATC)是反映输电线路可用于交易的剩余容量的重要指标。文中以最优潮流为基础，采用Benders分解方法将考虑静态安全约束的ATC计算问题分解为一个基态主问题和一系列与各预想事故有关的子问题。主问题用来处理基态潮流和相应约束以及由子问题所返回的Benders割(cut)约束，而各子问题用来处理各预想事故和形成相应的静态安全约束。文章给出了相应的数学模型，并提出了两种改进的求解策略。4节点和IEEE30节点系统的计算结果表明了该方法和求解策略的有效性。