Direct optical injection locking of 20 GHz superlattice oscillators

For the first time, a direct optically injection-locked oscillator based on the Esaki-Tsu effect in superlattices is reported. The microwave output power is -7 dBm at 20 GHz with an optical input power of -10 dBm at a wavelength of 1.3 μm     

Floor free 10-Gb/s transmission with directly modulated GaInNAs-GaAs 1.35-/spl mu/m laser for metropolitan applications

Among the new semiconductor materials for telecom devices, the GaInNAs-GaAs structure presents interesting properties for low-cost applications, like high differential gain and high T/sub 0/. Another key aspect of the performance is the behavior of the GaInNAs-GaAs based lasers under high bit rate direct modulation. Here, we demonstrate the dynamic capabilities of GaInNAs-GaAs three-quantum-well ridge structure through 2.5-Gb/s directly modulated laser emission and transmission on standard fiber, in the temperature range 25/spl deg/C-85/spl deg/C. Besides transmission is demonstrated up to 10 Gb/s at 25/spl deg/C on the same fiber, without penalty and bit-error-rate floor.     

Phytochemical and biological investigation of <Emphasis Type="Italic">Stevia rebaudiana</Emphasis> Bertoni; 1-labdane-type diterpene

Five labdane diterpenoids, austroinulin, iso-austroinulin, sterebin E, sterebin E acetate, and sterebin A acetate, along with hydrocarbons, aliphatic alcohols, β-amyrin, β-sitosterol and stigmasterol were isolated from the chloroform soluble fraction of the methanol extract of Stevia rebaudiana leaves. Chlorogenic and caffeic acids were isolated from the EtOAc fraction. All the isolated compounds were identified using spectral tools. The chloroform and methanol extracts proved significant anti-inflammatory effect and caused marked inhibition of carrageenan-induced paw oedema in rats.     

Morphology development in polyethylene/polystyrene blends: the influence of processing conditions and interfacial modification

The influence of processing conditions and interfacial modification on the morphology evolution and the composition range within which fully co‐continuous high density polyethylene/polystyrene blend structures can exist during blending in a single screw extruder was studied. Blends ranging from pure A to pure B component, with and without compatibilizer, were prepared under two different shear rates. It was found that high shear rates displaced the breakdown–coalescence balance of the dispersed nodules to the side of coalescence, narrowing the percolation domain and the critical composition for full co‐continuity decreased with increasing shear rates. The addition of a tri‐block compatibilizer induced the percolation threshold of the polystyrene phase to begin at lower percentages of polyethylene but the phase inversion point did not change. The experimental results are discussed in the light of various theoretical models. Copyright © 2005 Society of Chemical Industry     

Prediction of visual attention with deep CNN on artificially degraded videos for studies of attention of patients with Dementia

Multimedia Tools and Applications - Studies of visual attention of patients with Dementia such as Parkinson’s Disease Dementia and Alzheimer Disease is a promising way for non-invasive...     

Effect of thermal insulation using leather and carpentry wastes on thermal comfort and energy consumption in a residential building

In this work, we investigate the effect of the thermal insulation by leather wastes (wet-blue chrome shavings and buffing dust) and carpentry wastes (wood shavings and sawdust) on the energy consumption of a model building using the average climatic data of the city of Casablanca (Morocco). For this study, we used the dynamic thermal simulation tool “TRNSYS 16” which predicts the thermal behavior of building and systems associated with it. Using this software, we evaluated the effect of the above material wastes on thermal comfort and building energy consumption. The type and the thickness of the materials were considered as variants to choose the better solution. The average temperatures of building supposed thermally insulated compared to those obtained without insulation clearly show the thermal insulation ability of tested materials during the cold and warm periods of the year. Increasing the thickness of the insulator makes locals increasingly comfortable. Because of their performance, leather and carpentry wastes can compete with conventional insulating materials such as polystyrene and cork.     

Dispersed phase morphology and fractionated crystallization of high-density polyethylene in PET/HDPE blends

The fractionated crystallization of high density polyethylene dispersed in a poly(ethylene terephthalate) matrix at composition of 15 wt-% was studied. The effect of the molecular weight of polyethylene with and without compatibilization was particularly addressed regarding its influence on the morphology of the blends. For non-compatibilized blends, the dramatic influence of the molecular weight of the polyethylene on the viscosity ratio and therefore on the dispersion is reflected on the relative intensities of the twin crystallization peaks of polyethylene that are developed upon cooling. These peaks reflect two sets of particles that are nucleated by more or less active heterogeneities. The influence of the addition of an ethylene-glycidyl methacrylate copolymer on the morphology and on the crystallization of the blends was also investigated. For a high molecular weight polyethylene, the compatibilizer shows less efficiency as far as dispersion is concerned.     

Structure,texture and surface acidity studies of a series of mixed zinc–aluminum (60–90 molar % Al) phosphate catalysts

A series of mixed zinc–aluminum phosphate (ZnAlP) catalysts containing 40–90 aluminum molar % were synthesized by a coprecipitation method and characterized by nitrogen adsorption–desorption, X‐ray diffraction, FTIR spectroscopy, thermogravimetric analysis (TGA), differential thermal analysis (DTA), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature programmed desorption (TPD) of ammonia. The presence of aluminum greatly affected the surface properties of Zn₃(PO₄)₂ by delaying the crystallization process of Zn₃(PO₄)₂. All amorphous samples were shown to be mesoporous and they contained two types of aluminum surface hydroxyl groups and one type of phosphorus hydroxyl group, as shown by DRIFT spectra. The specific surface area and the acidity of ZnAlP increased on increasing the aluminum content. On the other hand, a great difference in the texture and the concentration of surface acid sites was found by changing the precipitating agent and calcination temperature. Thus these factors also play an important role in the final properties of these catalysts. © 2001 Society of Chemical Industry