A Stable Low Power Dissipating 9 T SRAM for Implementation of 4 × 4 Memory Array with High Frequency Analysis

Wireless Personal Communications - Today’s high speed data processing and memory storage operations demand immediate data write and retrieval to meet up to benchmark. To act as a volatile or...     

Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

实炉底节能连续式加热炉

轧钢生产使用实炉底连续式加热炉加热钢坯，炉内双纵滑管用耐热耐高温材料，无水冷，起到节约水、电的作用，达到节能增效的目的。     

太钢4号高炉喷煤站应用MFD—Ⅲ型布袋除尘器的实践

太钢４号高炉喷煤站从１９９０年起采用ＭＦＤ－Ⅲ型脉动反吹式布袋除尘器。这种除尘器采用脉动式反吹清灰设施，合理布置布袋间距，布袋支撑骨架及选用针呢材质的布袋，过滤面积大，反吹清灰效果好，设备运行平稳，除尘效率高达９９．８％，排放浓度小于１０ｍｇ／ｍ＾３，故障率低。     

均匀化退火对Al－Mg－Li（01420）合金加工性能及力学性能的影响

通过对０１４２０合金的均匀化退火，研究了均匀化制度对合金热加工性能和力学性能的影响。结果表明：均匀化制度对合金性能的影响很大，均匀化不足或过烧都会使合金热轧开裂和塑性降低。经过４７５℃×４８ｈ退火后，主合金元素Ｍｇ的分布均匀，合金可获得最好的综合性能。     

Iron deficiency anemia following prenatal nutrition interventions.

PURPOSE: Iron deficiency anemia (IDA) during pregnancy and infancy is still common in developed countries, especially in low-income groups. We examined the prevalence of anemia and IDA in healthy low-income pregnant women participating in the Early Childhood Initiatives (ECI) program, and in their infants when they reached six months of age. METHODS: Pregnant women were recruited by nutritionists. In mothers, hemoglobin (Hb), mean corpuscular volume, and serum ferritin (SF) were measured at 36 +/- 2 weeks of gestation. In infants, Hb, mean corpuscular volume, SF, serum iron, total iron binding capacity (TIBC), and transferrin saturation (TS) were measured at six months of age. Thirty-one mother-infant pairs participated. RESULTS: Among the 31 pregnant women participating in the ECI program, six (19.4%) were anemic (Hb <110 g/L) and five (16.1%) suffered from IDA (Hb <110 g/L and SF <10 microg/L). Among infants, seven of 23 (30.4%) were anemic (Hb <110 g/L) and five of 23 (21.7%) suffered from IDA (Hb <110 g/L plus two of the following: TIBC >60 micromol/L, SF <10 microg/L, serum iron <5.3 micromol/L, TS < or = 15%). CONCLUSIONS: The prevalence of anemia in this group of low-income pregnant women is comparable to that in privileged women. The prevalence of IDA in infants is comparable to that observed in other high-risk groups. Effective strategies are needed to prevent IDA in vulnerable groups.     

网络计划之实践

通过对所参与工程的实践体会。介绍网络计划技术在旧厂改造工程中的重要作用和几种主要管理方法。     

钢筋砼矩形截面受弯构件优化设计

对钢筋砼矩形截面受弯构件提出一种优化的方法。     

Glyconanoparticle-DNA interactions: an atomic force microscopy study.

Glyconanoparticles which present carbohydrate and amino groups motifs at their surface were produced. These particles were highly stable and soluble in aqueous solutions. The presence of the carbohydrate groups also allowed the inclusion of more strongly binding groups, without affecting solubility. The binding of a model DNA, plasmid by these nanoparticles was studied by atomic force microscopy, transmission electron microscopy, and gel electrophoresis. Significant differences between the nanoparticles based on their affinities for the DNA were found, with implications for their potential use as nonviral gene delivery agents.