Mathematical model for computer simulation and control of steelmaking

A dynamic model for computer simulation and control of steelmaking has been developed. It is essentially based on multicomponent mixed transport control theory with the incorporation of energy balance calculations. The model is applicable to both steelmaking in electric furnaces as well as in oxygen steelmaking converters. The adjustable parameters of the model for simulation of oxygen steelmaking are gas evolution rate (G_co). oxygen flux factor (F_o) and emulsification factor (EM). These simulation parameters, when combined with on-line measurement of off-gas composition and temperature, enable complete dynamic control of the process. The model developed is applied, as an example, to an industrially produced heat in a top blown oxygen steelmaking converter and the results of simulation are discussed.     

Electrical Characterization of p-Type Pb1−x Eu x Te

The transport properties of p-type Pb_1?x Eu _x Te epitaxial layers were studied as a function of Eu content, temperature, and magnetic field. The low-temperature hole mobility is drastically reduced when the Eu concentration is increased from 0 to 6%, while the hole concentration remains almost constant. A metal-insulator transition was observed for x ≈ 0.04, which is probably induced by the disorder caused by the introduction of Eu. For temperatures down to 10 K, only positive magnetoresistance has been observed at low magnetic fields. An anomalous behavior of the resistivity as a function of temperature has been detected for a Eu content about 5%, which is attributed to the resonance between the localized Eu 4f level and the valence band maximum.     

IEEE-PES Transmission and Distribution Conference and Exposition Call for Papers

Static network-related system voltage stability margin (VSM) depends on the availability of reactive power to support the transport of real power from sources to sinks. Based on this premise, the total VAr loss is minimized in the unified OPF framework considering real and reactive power controllers, and its effect on VSM is studied. Studies are conducted on a three-bus system, the IEEE 30-bus system, and a 191-bus Indian electric power system, and their results are reported.     

Microwave-Assisted Synthesis of Fine Particle Oxides Employing Wet Redox Mixtures

Interaction of electromagnetic radiation with a physical mixture of metal nitrates and amides/hydrazides is observed to initiate high-temperature reactions, useful for realizing several high-temperature ceramic materials. A judicious choice of such redox mixtures undergoes exothermic reactions when they couple with microwave radiation. The coupling of electromagnetic radiation with metal salts and amides/hydrazides depends on the dielectric properties of the individual components in the reaction mixture. The approach has been used to prepare γ-Fe₂O₃, Fe₃O₄, MgCr₂O₄, α-CaCr₂O₄, and La_0.7Ba_0.3MnO₃.     

Reasoning about non-immediate triggers in biological networks

Modeling molecular interactions in signalling networks is important from various perspectives such as predicting side effects of drugs, explaining unusual cellular behavior and drug and therapy design. Various formal languages have been proposed for representing and reasoning about molecular interactions. The interactions are modeled as triggered events in most of the approaches. The triggering of events is assumed to be immediate: once an interaction is triggered, it should occur immediately. Although working well for engineering systems, this assumption poses a serious problem in modeling biological systems. Our knowledge about biological systems is inherently incomplete, thus molecular interactions are constantly elaborated and refined at different granularity of abstraction. The model of immediate triggers can not consistently deal with this refinement. In this paper we propose an action language to address this problem. We show that the language allows for refinements of biological knowledge, although at a higher cost in terms of complexity.      

Optimisation of solar photovoltaic (PV) parameters using meta-heuristics

Microsystem Technologies - This paper presents a critical analysis of the meta-heuristic techniques used in various researches on the optimisation of photovoltaic (PV) parameters, which involves...     

Aggregation dynamics of particles in a microchannel due to an applied magnetic field

Functionalized magnetic microspheres have promising applications in different microfluidic devices including MEMS-scale biosensors. These particles exhibit magnetic field-induced aggregation, which can be harnessed to achieve several practical tasks in microfluidic devices. For this, the particle aggregation needs to be well characterized. Herein, a numerical simulation and experimental validation of particle-chaining is presented. Simulations show that the particle aggregation time scales linearly with a group parameter. The predicted growth of one- two- and three-particle chains with time shows a similar trend as that found in the experiments. The results of the study could help predicting the performance of magnetic aggregate-based lab-on-a-chip devices.     

Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Grafting of methyl methacrylate onto guar gum by hydrogen peroxide initiation

Graft copolymerization of methyl methacrylate (MMA) onto guar gum (GG) in aqueous slurry has been carried out using hydrogen peroxide (H₂O₂) as initiator. The copolymers were characterized by infrared spectroscopy. The grafting parameters like percent grafting, grafting efficiency, percent add-on, and the grafting frequency were determined, and the effect of reaction time, concentration of initiator, and [GG]/[MMA] ratios on the grafting parameters have been discussed. The decrease in % add-on at increasing concentration of H₂O₂ indicated enhancement in the rate of homopolymerization of methyl methacrylate.     

Micropore characterization using the Dubinin-Astakhov equation to analyze high pressure CO2 (273 K) adsorption data

The characterization of the pore structure of microporous materials is of interest because of the usefulness of these materials in many applications. Of these, the characterization of carbon adsorbents is particularly problematic because of the presence of small pores with size on the order of small molecules (micropores) along with a wide distribution of pore sizes, and their non-crystalline structure. In this paper, we present results obtained using the Dubinin-Astakhov equation to analyze data from high pressure CO₂ adsorption at 273 K to characterize two sets of microporous carbons. Our results support the conclusions of previous workers that the Dubinin-Astakhov (DA) equation is able to linearize adsorption data that gives rise to curved Dubinin-Radushkevich plots. However, when applied over different ranges of relative pressure on the adsorption isotherm, the Dubinin-Astakhov plots result in different values of micropore volume and characteristic adsorption potential. Furthermore, DA analysis of CO₂ (273 K) adsorption data over a wide range of pressures (10^–3–22000 Tort), gives results different from DA analysis of CO₂ (273 K) isotherms measured at low pressures only (10^–3–830 Tort). It would appear desirable to apply the DA equation to data that reflects the entire range of micropore filling on the adsorption isotherm, as opposed to data over a limited relative pressure range. For CO₂ adsorption at 273 K, this would necessitate adsorption studies at high pressures, to about 28 atm. Micropore volumes obtained in this manner, agreed with the total pore volumes determined by nitrogen (77 K) adsorption for all the activated carbons studied.