Development and characterisation of a Y2Ti2O7-based glass-ceramic as a potential oxidation protective coating for titanium suboxide (TiOx)

A silica-based glass-ceramic, with Y₂Ti₂O₇ as the major crystalline phase, is designed, characterised and tested as an oxidation-protective coating for a titanium suboxide (TiO_x) thermoelectric material at temperatures of up to 600 °C. The optimised sinter-crystallisation treatment temperatures are found to be 1300 °C and 855 °C for a duration of 30 min, and this treatment leads to a glass-ceramic with cubic Y₂Ti₂O₇ and CaAl₂Si₂O₈ as crystalline phases. An increase of ~270 °C in the dilatometric softening temperature is observed after devitrification of the parent glass, thus further extending its working temperature range.Excellent adhesion of the glass-ceramic coating to the thermoelectric material is maintained after exposure to a temperature of 600 °C for 120 h under oxidising conditions, thus confirming the effectiveness of the T1 glass-ceramic in protecting the TiO_x material.     

Glial development in the Drosophila CNS requires concomitant activation of glial and repression of neuronal differentiation genes

Two classes of glial cells are found in the embryonic Drosophila CNS, midline glial cells and lateral glial cells. Midline glial development is triggered by EGF-receptor signalling, whereas lateral glial development is controlled by the gcm gene. Subsequent glial cell differentiation depends partly on the pointed gene. Here we describe a novel component required for all CNS glia development. The tramtrack gene encodes two zinc-finger proteins, one of which, ttkp69, is expressed in all non-neuronal CNS cells. We show that ttkp69 is downstream of gcm and can repress neuronal differentiation. Double mutant analysis and coexpression experiments indicate that glial cell differentiation may depend on a dual process, requiring the activation of glial differentiation by pointed and the concomitant repression of neuronal development by tramtrack.     

Higher Order Barycentric Coordinates

In recent years, a wide range of generalized barycentric coordinates has been suggested. However, all of them lack control over derivatives. We show how the notion of barycentric coordinates can be extended to specify derivatives at control points. This is also known as Hermite interpolation. We introduce a method to modify existing barycentric coordinates to higher order barycentric coordinates and demonstrate, using higher order mean value coordinates, that our method, although conceptually simple and easy to implement, can be used to give easy and intuitive control at interactive frame rates over local space deformations such as rotations.     

Action of chelators on solid iron in phosphate-containing aqueous solutions

To study the effect of strong iron-ligands on steel corrosion, mild steel electrodes were immersed in solutions containing 20 mM phosphate buffer (pH=7.2) and between 0.01 mM and 1 M of either the iron(II)-chelators 2,2^′-bipyridine or FerroZine, or the iron(III)-chelators citrate or acetylacetonate. Resulting surface reactions were investigated by quantifying the electrochemical potential (E), the electrochemical polarization resistance (R_p), the corrosion current (I_corr) and the release of iron into solution. The surface was further analyzed by scanning electron microscopy (SEM/SEM-EDAX) and atomic force microscopy. Concentrations of 0.1 mM of any of the chelators led to slight, temporary changes in E, I_corr and R_p. Concentrations of 10 mM resulted in characteristic changes of E, which were the same for all chelators and in the precipitation of FePO₄ in the case of citrate and acetylacetonate, or vivianite [Fe₃(PO₄)₂ · 8H₂O] in the case of bipyridine and FerroZine. Concentrations of 1 mM of both iron(III)-chelators led to a temporary drop of E similar to that found with 0.1 mM chelator. With iron(II)-chelators, E dropped to about −500 mV before oscillating for several days. The amplitudes of the oscillations were up to 200 mV with periods of 30 and 20-25 min for bipyridine and FerroZine, respectively.     

Structures of sialylated oligosaccharides of human erythropoietin expressed in recombinant BHK-21 cells

The native structures of the Asn-linked oligosaccharides and the O-glycans at Ser126 of human erythropoietin expressed from recombinant BHK cells have been elucidated. Enzymatically released N-glycans were studied by methylation analyses, fast-atom-bombardment mass spectrometry as well as one- and two-dimensional 1H-NMR spectrometry at 600 MHz. Many (82.7%) were found to be tetraantennary N-acetyllactosamine-type (22.8% with one, 3.6% with two and 0.4% with three N-acetyllactosamine repeats) being tetrasialylated (41%), trisialylated (29.6%) and disialylated (12.2%). A few (9.7%; 4.1% 2,4-branched, 5.6%, 2,6-branched) of the chains were triantennary (5.4% trisialyl, 4.3% disialyl) and 4.6% were of the disialyl diantennary type. Almost all of the innermost GlcNAc residues were alpha 1-6 fucosylated and NeuAc was exclusively alpha 2-3 linked to Gal beta 1-4GlcNAc-R; 60% of the protein was found to be O-glycosylated at Ser126; structures were monosialylated (70%) or disialylated (30%) forms of the Gal beta 1-3GalNAc core type. Glycosylation patterns at individual Asn-Xaa-Thr/Ser sites were determined by analytical high-pH anion-exchange chromatography with pulsed amperometric detection. Only tetraantennary chains with 0-3 N-acetyllactosamine repeats were detected at Asn38 and Asn83, while almost all of the di- and triantennary oligosaccharides were attached to Asn24. Batch analysis of different preparations of recombinant erythropoietin revealed the high reproducibility of the production procedure. Structures containing terminal GalNAc-GlcNAc were detected in small amounts in a few batches.     

The influence of preparation conditions on the electrochemical behaviour of CuO in a Li/CuO cell

A dozen CuO samples prepared under various conditions and from different starting materials were evaluated as cathode materials for a primary Li/CuO cell. The “thin electrode” method was used for rapid evaluation of the samples. Both coulombic efficiency and discharge voltage depend considerably on the method of synthesis. No correlation was found between the specific surface area and the resistivity of the samples on the one hand and the cathode performance on the other. Best results were obtained from CuO prepared by the oxidation of Cu₂O under controlled temperature and time of oxidation.     

BB_RADABA: a computer program as a tool for breeding and management of laboratory animals.

The use of well characterized laboratory animals in biomedical research is of importance for quality securing and reproducibility of animal experiments. Therefore, breeders should not only have in mind the reproduction of their animal stocks, but they should also be interested to achieve an optimal resemblance of the animals in the main traits characterizing them as a model of human diseases. Specific software applications which helps the breeders in monitoring the main breeding parameters, selecting suitable breeding pairs and data processing are practically not available. This prompted us to develop a computer program for management of breeding and experimental data, which we called BB_RADABA. In this report we want to give a short survey on this computer program.     

The effect of the scale of horizontal subsurface flow constructed wetlands on flow and transport parameters.

Horizontal subsurface flow constructed wetlands have proven their efficiency in treating wastewater and removing the pollutants of concern. Treatment efficiency depends on the wastewater residence time, which is a function of the hydraulic loading and the physical conditions of the constructed filter system, which can be described with effective parameters such as: hydraulic conductivity, porosity, dispersivity etc. Because spatial variability is often scale dependent, these effective parameters may be affected by the scale of the system being studied. In this paper the results of tracer experiments in constructed filters using saturated horizontal flow at three scales (small and medium lab scales and full-scale system) using the same filter media is reported. Light-weight aggregate (filter media termed Filtralite-P) was used at all scales. Increasing the scale was associated with increasing dispersivity, meanwhile hydraulic conductivity experienced dramatic reduction and variation by increasing the examined scale. Observed changes in the hydraulic parameters indicate that heterogeneity at different scales should be taken into account when the performance of LWA filters are evaluated from small-scale experiments.     

Blood-flow sensing by anionic biopolymers

The purpose of this study was to compare local recurrence, distant metastases, and survival rate in 350 patients with cancer of the middle and low rectum who underwent a radical abdominoperineal resection (APER) or a sphincter-saving resection (SSR) in our Institute. There were 257 APER patients and 93 SSR patients, with a median follow-up of 77 months. At 5 years, the estimates in APER and SSR patients were respectively 11% and 30% for the incidence of pelvic recurrence, 18% and 8% for the incidence of distant metastases, and 64% and 73% for overall survival. In the multivariate analysis it was found that Dukes' stage significantly affected pelvic recurrences, distant metastases rate and overall survival; histologic type affected only the pelvic recurrence rate. However, the final outcome of patients following APER or SSR was similar, suggesting that local failure per se does not affect long-term survival.