Improved quantum efficiency of Sr(Al,Si)5(O,N)7:Ce3+ by selection of Ce raw material

The luminescence properties of yellow-emitting Ce³⁺-doped Sr-containing sialon phosphor Sr(Al,Si)₅(O,N)₇:Ce³⁺ were notably improved by the Ce raw material selection. By changing the Ce raw material from oxides to nitrides or chlorides, the emission wavelength shifted to above 560 nm, which is beneficial for higher color rendering index white light-emitting diodes. This result from an increase in the covalency of the host crystal being associated with a decrease in the oxygen content. When Ce chloride was used, both the absorption and internal quantum efficiency increased, resulting in an increase in the external quantum efficiency up to 65%–72%. Inductively coupled plasma mass spectrometry, X-ray diffraction, and electron spin resonance measurements showed that the reason for the absorption increase is an increase in Ce³⁺ content and suppression of the generation of the second phase, and the reason for the increase in the internal quantum efficiency is a decrease in the host crystal absorption via suppression of anion vacancy generation. It was found that Ce chloride not only suppresses oxygen impurities but also acts as a flux that results in improved crystallinity.     

空调白色面板ABS材料光老化研究

采用家电行业常用的人工加速光老化实验方法,对目前空调面板常用的白色ABS材料进行了光老化研究,一方面比较了色母料和改性料方案的耐光老化性能,另一方面比较了常用光老化试验方法严酷程度.研究表明:改性料方案耐光老化性能优于色母料;采用氙灯光老化(X)、紫外光老化UVA(ZA)和紫外光老化UVB(ZB)等三种常用试验方法时,实验样品对光老化的响应程度依次为:UVB(ZB)测试＞UVA(ZA)测试＞氙灯(X)测试.     

Biased distribution of the branched-chain fatty acids in ceramides of vernix caseosa

The compositions of ester- and amide-linked fatty acids from ceramides of human vernix caseosa were described with emphasis on the distribution of the branched-chain fatty acid (BCFA). Two novel ceramides were isolated from vernix caseosa in the course of this study: the acylated type of esterified α-OH-hydroxyacid/sphingosine ceramide (Cer[EAS]) and nonacylated type of non-OH fatty acid/hydroxysphingosine ceramide (Cer[NH]). Their chemical structures were identified by nuclear magnetic resonance and chemical procedure. The Cer[EAS] was an acylceramide and consisted of the highest concentrations of ester- and amide-linked BCFA (62 and 67%, respectively). The iso- or anteiso-branching structures of the aliphatic chains were confirmed by the mass spectra of their picolinyl or pyrrolidide derivatives. As a whole, amide-linked fatty acids of ceramides 1–7 and Cer[NH] were normal types of straight-chain fatty acids with or without α- or ω-hydroxylation. The BCFA concentrations of amide-linked fatty acids in these ceramides (ceramides 1–7 and Cer[NH]) were low and less than 10%. The BCFA thus occurred exclusively in a novel acylceramide of Cer[EAS] in the vernix caseosa.     

Characterization and Sintering Behavior of Alkoxide-Derived Aluminosilicate Powders

Submicrometer SiO₂-Al₂O₃ powders with compositions of 46.5 to 76.6 wt% Al₂O₃ were prepared by hydrolysis of mixed alkoxides. Phase change, mullite composition, and particle size of powders with heating were analyzed by DTA, XRD, IR, BET, and TEM. As-produced amorphous powders partially transformed to mullite and Al-Si spinel at around 980°C. The compositions of mullite produced at 1400° and 1550°C were richer in Al₂O₃ than the compositions of stable mullite solid solutions predicted from the phase diagram of the SiO₂-Al₂O₃ system. Particle size decreased with increasing Al₂O₃ content. The sintered densities depended upon the amount of SiO₂-rich glassy phase formed during sintering and the green density expressed as a function of particle size.     

Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

Olympics and Urban Legacy in Sydney: Urban Transformations and Real Estate a Decade after the Games

The Olympic Games (OG) are an opportunity for cities to display themselves on the world stage. Cities from developed and developing countries present themselves to hold the Games, always with a double intention: to promote itself in the global arena and use this opportunity to stimulate urban changes. However, there are very few studies that analyze the urban legacy of the OG for the host cities, probably because it takes years for an urban legacy to become established, and when the time is right to analyze this legacy other OG are on the agenda. The aim of this paper is to analyze the urban legacy left by the 2000 OG in Sydney. Sydney has been chosen for this analysis because, as there have been no other major development projects for the Homebush Bay region since the 2000 OG, the impact of the Games can be measured, specifically regarding physical transformations, discussing what their real urban legacy is.     

Feasibility of zeolites in converting butyric acid into propylene for biorefineries

The biorefinery has been recognized as a new industry to produce both energy and chemical materials such as olefins and BTX from renewable resources. In this context the conversion of butyric acid over zeolites was investigated for establishing a new production route of propylene. Propylene was mainly generated by decarbonylation and dehydration of butyric acid. Our study proved that H-ZSM-5 (750) and silicalite were the best industrial catalyst among the tested ones. For H-ZSM-5 (750), the selectivity of propylene reached 64.2 C% and the ratio of the yield for propylene to theoretical yield (75 C%) became 85.6%.     

Correction to: Designing cost-efficient inspection schemes for stochastic streamflow environment using an effective Hamiltonian approach

Optimization and Engineering -     

Thermoreversible behavior of κ-carrageenan and its apatite-forming ability in simulated body fluid

Osteoconductive materials with self-setting ability have received much attention because their properties allow developing injectable materials for bone defects. Thermosensitive hydrogel with ability of bone-like apatite formation in a body environment is a candidate of injectable bone fillers with osteoconductivity because the apatite formation on materials is an essential to show osteoconduction. The present study focused on the development of a thermosensitive hydrogel through modifications of the sulphonic groups of the polysaccharide, κ-carrageenan, with potassium chloride (KCl) and calcium chloride (CaCl₂). We found that the gelation temperature of κ-carrageenan solutions increased with increasing amounts of K⁺ ions. Apatite formation was observed on the gel after exposure to simulated body fluid for 0.5 day when the gel was prepared with a molar ratio of Ca²⁺/sulfonic groups = 1.5. These results indicate that a thermosensitive κ-carrageenan hydrogel with apatite-forming ability was obtained through the incorporation of K⁺ and Ca²⁺ ions into the solution.     

Molecular cloning of porcine growth differentiation factor 9 (GDF-9) cDNA and its role in early folliculogenesis: direct ovarian injection of GDF-9 gene fragments promotes early folliculogenesis

Growth differentiation factor-9 (GDF-9) is a growth factor secreted by oocytes in growing ovarian follicles. To investigate the ovarian function of GDF-9 in pigs, we first cloned porcine GDF-9 complementary DNA (cDNA), and then injected its gene fragments into the ovary in gilts. Porcine GDF-9 has open reading frame (ORF) homologies of 81.4%, 84.6%, 84.2%, 72.7% and 72.6% with its human, bovine, ovine, rat and mouse counterparts respectively. Regarding the deduced amino-acid sequence of the mature protein, the corresponding homologies reach 92.1%, 97.8%, 97.0%, 89.6% and 88.1% respectively. To investigate the role of GDF-9 in early folliculogenesis, the ovaries of 2-month-old prepubertal gilts were injected with GDF-9 gene fragments. The injection of porcine GDF-9 gene fragments resulted in an increase in the number of primary, secondary and tertiary follicles, concomitant with a decrease in the number of primordial follicles. These results indicated that exogenous GDF-9 can promote early folliculogenesis in the porcine ovary, and that a technique for direct ovarian injection of GFD-9 gene fragments may contribute to a novel therapy for prevention and treatment of infertility associated with ovarian dysfunction.