Environmental effects on the strength and impact damage resistance of alumina based oxide/oxide ceramic matrix composites

In this study the effects of high temperature and moisture on the impact damage resistance and mechanical strength of Nextel 610/alumina silicate ceramic matrix composites were experimentally evaluated. Composite laminates were exposed to either a 1050°C isothermal furnace-based environment for 30 consecutive days at 6 h a day, or 95% relative humidity environment for 13 consecutive days at 67°C. Low velocity impact, tensile and short beam strength tests were performed on both ambient and environmentally conditioned laminates and damage was characterized using a combination of non-destructive and destructive techniques. High temperature and humidity environmental exposure adversely affected the impact resistance of the composite laminates. For all the environments, planar internal damage area was greater than the back side dent area, which in turn was greater than the impactor side dent area. Evidence of environmental embrittlement through a stiffer tensile response was noted for the high temperature exposed laminates while the short beam strength tests showed greater propensity for interlaminar shear failure in the moisture exposed laminates. Destructive evaluations exposed larger, more pronounced delaminations in the environmentally conditioned laminates in comparison to the ambient ones. External damage metrics of the impactor side dent depth and area directly influenced the post-impact tensile strength of the laminates while no such trend between internal damage area and residual strength could be ascertained.     

Hydrocarbon condensation modelling to mitigate fluid coker cyclone fouling

FLUID COKING is a continuous process that thermally converts heavy hydrocarbons, such as oil sands bitumen, to lighter and higher‐value products by horizontal spray injection onto a fluidized bed of hot coke particles. The cyclone sections of commercial fluid coker reactors experience fouling during typical operation, which limits unit run lengths. The main objective of this work is to improve fluid coker reliability by proposing cyclone fouling mitigation strategies based on practical operation modifications. This study developed a process simulation in Aspen Plus to establish the combined impact of vapour‐liquid equilibrium, endothermic thermal cracking reactions, pressure changes, and overall fluid dynamics in the selected fluid coker control volumes. The hydrocarbon composition was defined by applying an assay characterization of distillation data for representative hydrocarbon streams. Case studies were performed to determine the sensitivity of the predicted temperatures and hydrocarbon condensate flow rates for: (a) the burner‐to‐fluid coker transfer line temperature; (b) the hot coke flow rate; (c) hot coke entrainment from the freeboard region; and (d) scouring coke flow rate in the horn chamber. The scouring coke flow rate was identified as the most promising process lever to mitigate fluid coker cyclone fouling.     

Using a Trust Inference Model for Flexible and Controlled Information Sharing During Crises

The fluid, urgent nature of crises requires flexible, responsive information sharing. Recent studies show, however, that in business catastrophes and other kinds of crises conventional access control mechanisms favor security over flexibility. Our work addresses these seemingly contradictory needs for security and flexibility and designs a trust inference model based on fuzzy logic, a model that can be used with pervasive computing technologies using sensors and mobile devices. Drawing upon research on trust, we design a trust inference model using attributes of affiliation, task performance, and urgency; apply the model to a known crisis; discuss implementation issues; and explore issues for further research. This article is dedicated to Alan Jarman, a founding influence in the Journal of Contingencies and Crisis Management who died in Canberra 15 July 2010. Alan's quantitative, engineering background and his long standing commitment to improving crisis decision making prompted him to encourage our applying fuzzy logic to crisis information sharing. We are grateful for Alan's encouragement and advice.     

Selecting and conserving lands for biodiversity: The role of remote sensing

A major focus of conservation is on protecting areas to ensure the persistence of biological diversity. Because such areas may be large, not easily accessible, subject to change, and sensitive to the surrounding landscape, remote sensing can be a valuable tool in establishing and managing protected areas. We describe three case studies to illustrate how remote sensing can contribute to setting priorities for conservation actions, monitoring the status of conservation targets, and evaluating the effectiveness of conservation strategies. In the Connecticut River watershed, remote sensing has been used to assess flood regimes and identify key areas of floodplain forests and their context for conservation planning. At Eglin Air Force Base in Florida, remote sensing has provided information to assess the effectiveness of management strategies to restore fire to the longleaf pine sandhills ecosystem, control invasive species, and prioritize annual prescribed burns. In eastern US forests, remote sensing is being used to evaluate the ecological condition and changes at properties where direct access would be difficult.As the resolution and capacities of remote-sensing technology continue to develop, however, several issues are becoming increasingly important. It is essential that the spatial and temporal resolution of remote-sensing data be matched to the relevant scales of biodiversity, major threats, and management actions. Data layers must be compatible, both in scale and in measurement properties, and key patterns must be distinguished from irrelevant detail, especially at the finer scales of application in local management. Combining remote sensing with ground surveys can expand the array of information used in management and contribute to the ecological interpretation of remote-sensing data. Because conservation funds are always limited, remote sensing also must be cost effective. This requires balancing the wealth of detail afforded by ever-finer resolution of remote-sensing data with what is actually needed to implement sound conservation and management. Remote sensing is a valuable tool, but it is not a panacea for all of the challenges of conservation monitoring and management.     

Sterol and steryl ester regulation of phospholipase A2 from the mosquito parasiteLagenidium giganteum

Lagenidium giganteum, a facultative parasite of mosquito larvae, cannot synthesize sterols, and requires an exogenous source of these lipids in order to enter its reproductive cycle. This parasite grows vegetatively in the absence of sterols, but requires cholesterol or structurally related compounds to produce motile zoospores, which are the only stage capable of infecting mosquitoes. Sterols structurally related to cholesterol and some steryl esters inhibited the activity ofL. giganteum phospholipase A₂ (PLA₂), an enzyme that hydrolyzes fatty acids from thesn-2 position of glycerophospholipids. Sterols that induce reproduction inhibitedL. giganteum PLA₂ activity, while sterols and steroids that do not support sporulation had minimal effect. Most steryl esters had no effect on enzyme activity, but cholesteryl arachidonate (CA) was a potent inhibitor of parasite PLA₂. Not all enzymes partly purified using a DEAE-Sephacel column were affected by these lipids, demonstrating selective inhibition of specific enzymes. Potency was enhanced by up to several orders of magnitude if epoxy fatty acids were esterified to the cholesterol nucleus. The steryl ester pool was dynamic during morphogenesis, and the fatty acid composition of the steryl esters did not mimic total cell or membrane (glycerophospholipid) fatty acid composition asL. giganteum proceeded through its growth cycle. Synthesis of CA and monoepoxy CA by the parasite was confirmed using electrospray mass spectrometry and collision-induced dissociation. Steryl derivatives selectively inhibited PLA₂ enzymes from bovine pancreas, snake venom, and human cytoplasmic 85-kDa PLA₂.     

Performance evaluation of canine-associated Bacteroidales assays in a multi-laboratory comparison study

The contribution of fecal pollution from dogs in urbanized areas can be significant and is an often underestimated problem. Microbial source tracking methods (MST) utilizing quantitative PCR of dog-associated gene sequences encoding 16S rRNA of Bacteroidales are a useful tool to estimate these contributions. However, data about the performance of available assays are scarce. The results of a multi-laboratory study testing two assays for the determination of dog-associated Bacteroidales (DogBact and BacCan-UCD) on 64 single and mixed fecal source samples created from pooled fecal samples collected in California are presented here. Standardization of qPCR data treatment lowered inter-laboratory variability of sensitivity and specificity results. Both assays exhibited 100% sensitivity. Normalization methods are presented that eliminated random and confirmed non-target responses. The combination of standardized qPCR data treatment, use of normalization via a non-target specific Bacteroidales assay (GenBac3), and application of threshold criteria improved the calculated specificity significantly for both assays. Such measures would reasonably improve MST data interpretation not only for canine-associated assays, but for all qPCR assays used in identifying and monitoring fecal pollution in the environment.     

What matters the most for economic development? Evidence from the Community Development Financial Institutions Fund

Governments use incentive programmes to attract new businesses. Due to limited resources, there are questions about which incentives are most effective. Using establishment data from California, and data on the location of disbursements through two federal programmes, we consider the effectiveness of different programmes in attracting new businesses. We find that the amount of funding through the New Markets Tax Credit programme has a significant impact on business activity but find no evidence of an effect from the Community Development Financial Institutions programme. Our results suggest that the effectiveness of these programmes depends on how they provide assistance.     

Effects of sediment addition on macrobenthic invertebrates in a Northern Canadian River

Two channels built into the Harris River, Northwest Territories were used to study responses of invertebrates to sediment addition. Sediment was added to one channel continuously for approximately 5 h. The other channel was used as a control. In August, 28.27 kg of sediment or 1.38 kg m⁻² of channel bottom were added. Values for September were 35.88 kg or 1.53 kg m⁻².As a result of sediment addition, numbers of macrobenthos drifting from the sediment addition channel (S) increased significantly over those drifting in the control (C) in August (= summer) and September (= fall). Total drift from S was > 3 times higher in August and > 2 times higher in September than from C. Significantly higher numbers of macrobenthos drifted in fall than summer. Numbers of macrobenthos drifting during sediment addition were significantly related to time in September but not in August, indicating a seasonal difference in temporal response to sediment addition. Two explanations are proposed for the response of the September community, as indicated by shape of a polynomial regression curve, to sediment addition. No significant difference existed in standing crops of macrobenthos in the substrate in C and S after sediment addition.Sediment addition caused (1) higher numbers of Oligochaeta and Simuliidae to drift in August and September; (2) higher numbers of Plecoptera and Ephemeroptera to drift in September but not in August; and (3) higher numbers of Hydracarina and Chironomidae to drift in August but not September.We suggest that future work try to relate amounts of settled rather than suspended sediments to quantitative responses of stream macrobenthos. We recommend that highway and pipeline construction undertaken in watersheds of Mackenzie Valley streams during the open-water period, resulting in sediment addition to these streams, should be done during summer rather than spring or fall, providing river discharge is adequate to transport the added sediment.     

Compendium of photovoltaic degradation rates

Published data on photovoltaic (PV) degradation measurements were aggregated and re‐examined. The subject has seen an increased interest in recent years resulting in more than 11 000 degradation rates in almost 200 studies from 40 different countries. As studies have grown in number and size, we found an impact from sampling bias attributable to size and accuracy. Because of the correlational nature of this study we examined the data in several ways to minimize this bias. We found median degradation for x‐Si technologies in the 0.5–0.6%/year range with the mean in the 0.8–0.9%/year range. Hetero‐interface technology (HIT) and microcrystalline silicon (µc‐Si) technologies, although not as plentiful, exhibit degradation around 1%/year and resemble thin‐film products more closely than x‐Si. Several studies showing low degradation for copper indium gallium selenide (CIGS) have emerged. Higher degradation for cadmium telluride (CdTe) has been reported, but these findings could reflect a convolution of less accurate studies and longer stabilization periods for some products. Significant deviations for beginning‐of‐life measurements with respect to nameplate rating have been documented over the last 35 years. Therefore, degradation rates that use nameplate rating as reference may be significantly impacted. Studies that used nameplate rating as reference but used solar simulators showed less variation than similar studies using outdoor measurements, even when accounting for different climates. This could be associated with confounding effects of measurement uncertainty and soiling that take place outdoors. Hotter climates and mounting configurations that lead to sustained higher temperatures may lead to higher degradation in some, but not all, products. Wear‐out non‐linearities for the worst performing modules have been documented in a few select studies that took multiple measurements of an ensemble of modules during the lifetime of the system. However, the majority of these modules exhibit a fairly linear decline. Modeling these non‐linearities, whether they occur at the beginning‐of‐life or end‐of‐life in the PV life cycle, has an important impact on the levelized cost of energy. Copyright © 2016 John Wiley & Sons, Ltd.