Low power and high speed design issues of CMOS Hamming code generation and error detection circuit at 22 nm and 16 nm channel length of MOS transistor

Microsystem Technologies - This paper represents low power and high speed design issues of Hamming code generation and error detection circuit using complementary metal oxide semiconductor (CMOS)...     

The water purification system for the low background counting test facility of the Borexino experiment at Gran Sasso

The Borexino experiment, for the study of solar neutrino physics, requires radiopurity at the level of 5 × 10⁻¹⁶ g/g ²³⁸U equivalent (or 6 × 10⁻⁹ Bq/kg) on a detector mass of many tons of scintillator. Feasibility studies are performed in a counting test facility now operating at LNGS, which consists of 4 t of liquid scintillator viewed by 100 photomultipliers and shielded by 100 t of water. The accomplishment of this goal requires the shielding liquid, water, to be at the 10⁻¹³ g/g contamination level (1.2 × 10⁻⁶ Bq/kg) or better. This paper describes the water purification system; it consists of a combination of several purification processes to remove particulate, radioactive ions, dissolved gases and other impurities. Residual contaminations are measured by analytical or direct-counting techniques. For radon measurement, particularly challenging at this low activity levels, a low background counting method has been developed.     

Simulation of smoke from a burning vehicle and pollution levels caused by traffic jam in a road tunnel

Detailed analyses of smoke movement from a burning vehicle in a road tunnel have been carried out for the westbound Melbourne City Link tunnel. The time-averaged equations for velocity, pressure, temperature, and mass fraction of emissions were solved for transient condition using the CFD software FLUENT 6.0. For the analysis, a burning bus was assumed to release an equivalent energy of burning 500 l of diesel in 6 min, with vehicles upstream of the fire at a standstill. On the other hand, the vehicles downstream of the fire had enough time to escape from the tunnel through the exit portal. Due to the action of jet fans, most of the smoke was pushed downstream of the fire. The smoke had also dispersed about 55 m upstream of the fire, putting the passengers in this region at great risk. The emissions released from the vehicles in the jam, with their engines running, also posed a threat to human health. Within 8 min after the fire had started, the mass concentrations of O₂, CO₂ and CO were in the ranges of 0.12–0.15, 0.08–0.11 and 0.0006–0.0014, respectively. Therefore, quick evacuation of the passengers is essential in the event of a fire in the tunnel.     

Probabilistic design of ground improvement by vertical drains for soil of spatially variable coefficient of consolidation

The design of soil consolidation via prefabricated vertical drains (PVDs) has been traditionally carried out deterministically and thus can be misleading due to the ignorance of the uncertainty associated with the inherent variability of soil properties. To treat such uncertainty in the course of design of soil improvement by PVDs, more rational probabilistic methods are necessary. In this paper, a simplified probabilistic method is proposed in which the inherent variability of the coefficient of consolidation, which is the most significant uncertain soil parameter that affects the consolidation process, is considered. An easy-to-use design procedure and charts are provided for routine use by practitioners.     

Biohybrid Bovine Bone Matrix for Controlled Release of Mesenchymal Stem/Stromal Cell Lyosecretome: A Device for Bone Regeneration

SmartBone^® (SB) is a biohybrid bone substitute advantageously proposed as a class III medical device for bone regeneration in reconstructive surgeries (oral, maxillofacial, orthopedic, and oncology). In the present study, a new strategy to improve SB osteoinductivity was developed. SB scaffolds were loaded with lyosecretome, a freeze-dried formulation of mesenchymal stem cell (MSC)-secretome, containing proteins and extracellular vesicles (EVs). Lyosecretome-loaded SB scaffolds (SBlyo) were prepared using an absorption method. A burst release of proteins and EVs (38% and 50% after 30 min, respectively) was observed, and then proteins were released more slowly with respect to EVs, most likely because they more strongly adsorbed onto the SB surface. In vitro tests were conducted using adipose tissue-derived stromal vascular fraction (SVF) plated on SB or SBlyo. After 14 days, significant cell proliferation improvement was observed on SBlyo with respect to SB, where cells filled the cavities between the native trabeculae. On SB, on the other hand, the process was still present, but tissue formation was less organized at 60 days. On both scaffolds, cells differentiated into osteoblasts and were able to mineralize after 60 days. Nonetheless, SBlyo showed a higher expression of osteoblast markers and a higher quantity of newly formed trabeculae than SB alone. The quantification analysis of the newly formed mineralized tissue and the immunohistochemical studies demonstrated that SBlyo induces bone formation more effectively. This osteoinductive effect is likely due to the osteogenic factors present in the lyosecretome, such as fibronectin, alpha-2-macroglobulin, apolipoprotein A, and TGF-β.     

Effect of Oxide Fluxes on Depth of Penetration in Flux Bounded Tungsten Inert Gas Welding of AISI 304L Stainless Steel

Flux Bounded Tungsten Inert Gas (FBTIG) welding is a modified TIG welding process in which increased depth of penetration (DoP) can be achieved by laying thin flux coatings on either side of the weld centerline. The effect of three single component fluxes viz., SiO₂, TiO₂ and Cr₂O₃ on bead geometry of autogenous melt runs in AISI 304L stainless steel for the gap between the flux layers varying from 2 to 7 mm, is studied. Results show that DoP can be improved significantly in FBTIG process using single component fluxes. Nature of the flux and the gap between the flux layers influence the weld bead geometry. Among the three fluxes used, SiO₂ is more efficient in improving the DoP. Arc constriction is the predominant mechanism operative in improving the DoP in FBTIG welding. Possibility of change in solidification mode in FBTIG weld metals of stainless steels is highlighted.     

Influence of the coupling agent and graphene oxide on the thermal and mechanical behavior of tea dust–polypropylene composites

In this study, the effects of a coupling agent and additive on the physicomechanical (morphological, mechanical, thermal, and swelling) properties of tea dust (TD)–polypropylene (PP) composites were studied. TD–PP composites were prepared with untreated tea dust (UTD) and tetraethylsilane (TES)‐treated TD or silanated tea dust (STD) particles at ratios of 0:100, 10:90, 20:80, 30:70, and 40:60 w/w. Initially, TD particles were grafted by TES as a coupling agent, and these STD particles were then modified with graphene oxide (GO) as an additive to study their effects on the STD–PP composites; these were compared to the STD–PP and UTD–PP composites in accordance with a study of improvements in the mechanical properties. All of the TD–PP composites were analyzed with Fourier transform infrared spectroscopy, scanning electron microscopy, and mechanical, thermal, and physical tests. The thermal and mechanical properties of both the STD–PP and GO‐modified STD–PP composites were found to be improved as compared to those of the UTD–PP composites. So, the recycling of a large amount of TD as a waste material could be useful in the preparation of TD–PP composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42927.