Design of Smart Door Closer System with Image Classification over WLAN

Wireless Personal Communications - A dual purpose system is presented in this paper which serves not only as a door closer, but is equally effective for surveillance purposes. The currently...     

A metaheuristic analysis of heat transfer rates through porous fins of tapered and step profiles: a comparative study

Neural Computing and Applications - The advanced high-end gadgets and sophisticated machines require effective mechanism of transferring heat away from the sources. In a large number of...     

Point Contact Spectroscopy and Temperature Dependence of Resistivity of Metallic Sodium Tungsten Bronzes - Role of Optical Phonons

In this paper we report the results of electrical resistivity (1.5≤ T ≤ 300K) and point contact spectroscopy (PCS) measurements on single crystals of metallic sodium tungsten bronze with varying sodium content. We have shown that the electron-phonon coupling function as measured through PCS can explain quantitatively the large temperature dependence of resistivity ρ seen in these materials over the entire temperature range. The electron-phonon coupling function shows predominately large peaks for phonon frequency range of 30 meV ≤ ω ≤ 100 meV which match well with the calculated optical phonons for WO₆ octahedron. The integrated electron-phonon coupling constant λ from this data is ≈ 0.25-0.45, depending on the Na content. PACS numbers: 72.15.-v, 72.80.Ga     

ATM-based transport architecture for multiservices wirelesspersonal communication networks

This paper presents an ATM-based transport architecture for next-generation multiservices personal communication networks (PCN). Such “multimedia capable” integrated services wireless networks are motivated by an anticipated demand for wireless extensions to future broadband networks. An ATM compatible wireless network concept capable of supporting a mix of broadband ISDN services including constant bit-rate (CBR), variable bit-rate (VBR), and packet data transport is explored from an architectural viewpoint. The proposed system uses a hierarchical ATM switching network for interconnection of PCN microcells, each of which is serviced by high-speed, shared-access radio links based on ATM-compatible cell, relay principles. Design issues related to the physical (modulation), media access control (MAC), and data-link layers of the ATM-based radio link are discussed, and preliminary technical approaches are identified in each case. An example multiservice dynamic reservation (MDR) TDMA media access protocol is then considered in further detail, and simulation results are presented for an example voice/data scenario with a proportion of time-critical (i.e., multimedia) packet data. Time-of-expiry (TOE) based queue service disciplines are also investigated as a mechanism for improving the quality-of-service (QoS) in this scenario     

Bandwidth renegotiation for VBR video over ATM networks

A scheme for delivery or variable bit-rate (VBR) video over asynchronous transfer mode (ATM) networks where bandwidth can be renegotiated during the duration of a call between the video source and the network is considered. Renegotiation can be initiated by either the video source or the network. The video bandwidth requirement is characterized by a usage parameter control (UPC) consisting, in general, of peak rate, burst length, and sustained rate. A baseline design is outlined where rate-control adjusts the source's rate while a new UPC is requested from the network. When granted, the new UPC allows the source to maintain its target quantization and delay requirements. Rate control epochs may be extended when the network blocks UPC requests or sets a lower UPC value to temporally deal with congestion. Simulation results are presented for VBR MPEG video. The results show that with a moderate renegotiation rate the scheme tracks the bandwidth requirements of the source. As a result, the video quality and bandwidth efficiency can be maintained     

Long-wave interfacial instabilities in a thin electrolyte film undergoing coupled electrokinetic flows: a nonlinear analysis

Spatiotemporal deformations of the free charged surface of a thin electrolyte film undergoing a coupled electrokinetic flow composed of an electroosmotic flow (EOF) on a charged solid substrate and an electrophoretic flow (EPF) at its free surface are explored through linear stability analysis and the long-wave nonlinear simulations. The nonlinear evolution equation for the deforming surface is derived by considering both the Maxwell’s stresses and the hydrodynamic stresses. The electric potential across the film is obtained from the Poisson–Boltzmann equation under the Debye–Hückel approximation. The simulations show that at the charged electrolyte–air interface, the applied electric field generates an EPF similar to that of a large charged particle. The EOF near the solid–electrolyte interface and the EPF at the electrolyte–air interface are in the same (or opposite) directions when the zeta potentials at the two interfaces are of the opposite (or same) signs. The linear and nonlinear analyses of the evolution equation predict the presence of travelling waves, which is strongly modulated by the applied electric field and the magnitude/sign of the interface zeta potentials. The time and length scales of the unstable modes reduce as the sign of zeta potential at the two interfaces is varied from being opposite to same and also with the increasing applied electric field. The increased destabilization is caused by a reverse EPF near the free surface when the interfaces bear the same sign of zeta potentials. Flow reversal by EPF at the free surface occurs at smaller zeta potential of the free surface when the film is thicker because of less influence of the EOF arising at the solid–electrolyte boundary. The amplitude of the surface waves is found to be smaller when the unstable waves travel at a faster speed. The films can undergo pseudo-dewetting when the free surface is almost stationary under the combined influences of EPF and EOF. The free surface instability of the coupled EOF and EPF has some interesting implications in the development of micro/nano fluidic devices involving a free surface.     

Performance of cellular packet CDMA in an integrated voice/data network

This paper presents a simulation-based study of cellular packet CDMA systems operating in an integrated voice/data traffic scenario. Spread-spectrum CDMA provides a suitable framework for resource-shared packet transport capable of combining isochronous (voice, ISDN) and bursty data services. In this work, a general network model for cellular packet CDMA with mixed voice/data traffic is described and used to evaluate the capacity/performance impact of several key system parameters. First, the effect of spreading factor (N) and forward error correction (FEC) rate are studied, confirming earlier work indicating a weak dependence onN and a well-defined optimum code rate in the range of 0.5–0.7 (with BCH coding). Next, the effect of propagation loss coefficient () on network capacity is investigated over a range of possible assumptions for, including both constant and distance-dependent models. The results show that system capacity depends strongly on, varying by as much as a factor of 2 over the range of parameters considered. For a given distance-dependent assumption, performance results are also obtained for different cell sizes in order to understand the overall spatial reuse efficiency achievable in different cellular and microcellular scenarios. This is followed by an investigation of traffic source model effects: first the capacity improvement from voice activity detection VAD) is presented, showing the expected 21 gains. Results for varying proportions of voice and data traffic intensities indicate that the operating efficiency does not change significantly as the proportion of bursty data relative to voice is varied.     

Wireless ATM: An enabling technology for multimedia personal communication

An ATM-based wireless network capable of supporting integrated voice, video and data services with Quality-of-Service (QoS) control is proposed as a key element of the future distributed multimedia computing scenario. A specific architecture for wireless ATM is described, and design issues are briefly discussed for each major functional layer of the network. The system approach is based on the incorporation of wireless channel specific medium access, data link and wireless control layers into a mobility-enhanced ATM protocol stack. Selected software emulation results are given for applicable Medium access Control (MAC) and Data Link Control (DLC) protocols. The paper concludes with a brief view of related ongoing prototyping activities aimed at demonstrating a seamless wired plus wireless multimedia networking environment.Presented in part at: Wireless Communications Seminar, Hong Kong IEEE/City U., Jan. 5, 1995, and 2nd Intl. Workshop on Mobile Multi-Media Communications, Bristol, UK, April 11–13, 1995.