Predicting dam failure risk for sustainable flood retention basins: A generic case study for the wider Greater Manchester area

This study aims to provide a rapid screening tool for assessment of sustainable flood retention basins (SFRBs) to predict corresponding dam failure risks. A rapid expert-based assessment method for dam failure of SFRB supported by an artificial neural network (ANN) model has been presented. Flood storage was assessed for 110 SFRB and the corresponding Dam Failure Risk was evaluated for all dams across the wider Greater Manchester study area. The results show that Dam Failure Risk can be estimated by using the variables Dam Height, Dam Length, Maximum Flood Water Volume, Flood Water Surface Area, Mean Annual Rainfall (based on Met Office data), Altitude, Catchment Size, Urban Catchment Proportion, Forest Catchment Proportion and Managed Maximum Flood Water Volume. A cross-validation R² value of 0.70 for the ANN model signifies that the tool is likely to predict variables well for new data sets. Traditionally, dams are considered safe because they have been built according to high technical standards. However, many dams that were constructed decades ago do not meet the current state-of-the-art dam design guidelines. Spatial distribution maps show that dam failure risks of SFRB located near cities are higher than those situated in rural locations. The proposed tool could be used as an early warning system in times of heavy rainfall.     

The Effect of Nickel Electroplating on Corrosion Behavior of Metal Matrix Composites

Nickel electroplating was applied to A356.2 aluminum alloy and its composites for improving its corrosion resistance. The corrosion resistance of the A356.2 and composites reinforced with rice husk ash particulates was evaluated by potentio-dynamic polarization tests in aerated 3.5% NaCl solution. Composites were fabricated by using the liquid state processing technique. Scanning electron microscopy, energy dispersive spectroscopy, techniques were used for surface analysis of the coatings before the corrosion tests and optical microscope was used to study the surface morphology of the uncoated and coated specimens after polarization tests. Results demonstrated that the nickel coated specimens exhibited higher corrosion resistance than the uncoated specimens. However, it was noticed that there was no significant change in the corrosion resistance for the nickel plated composites.     

Study and Analysis of the Effect of Harmonics on the Hot Spot Temperature of a Distribution Transformer Using Finite-Volume Method

Transformers are critical components in power systems and their failure can cause long interruption of power supply. The condition of a transformer can be monitored by performing thermal analysis. The use of non-linear devices, such as rectifiers and converters, draws harmonic currents that increase losses in transformers, thereby increasing their operating temperature. In this article, a new numerical approach is presented for determining the rise in hot spot temperature in a 5-kVA, 400/400-V dry-type three-phase transformer laboratory prototype. The key novelty is that the additional winding eddy current loss due to non-linear loads is considered in the numerical modeling. The winding eddy current loss corresponding to harmonic distortion is estimated by conducting experiments and calculations. Numerical simulations are carried out for a wide range of non-linear loads using a commercial computational fluid dynamics package, FLUENT 6.3. The proposed numerical methodology is validated by performing experiments on the transformer for possible non-linear loads and comparing the measured hot spot temperature with the simulated values. Correlation equations for rise in hot spot temperature as a function of total harmonic distortion are presented, which can be used for estimating the life of transformers when connected to different types of loads.     

Enzymatic Interesterification of High Oleic Sunflower Oil and Tripalmitin or Tristearin

The objective of this study was to produce low saturated, zero‐trans, interesterified fats with 20 or 30 % saturated fatty acids (SFA) such as C16:0 or C18:0. Tripalmitin (TP) or tristearin (TS) was blended with high oleic sunflower oil (HOSO) at different ratios (0.1:1, 0.3:1, and 0.5:1 [w/w]). Total C16:0 and C18:0 compositions of the resulting TP/HOSO and TS/HOSO blends, respectively, were plotted against blending ratios. Linear interpolation was used to estimate blending ratios that would yield physical blends (PB) with 20 or 30 % SFA. Interesterified blends (IB) were then synthesized from the customized PB using Lipozyme TL IM as the biocatalyst. Total and sn‐2 fatty acid compositions, triacylglycerol (TAG) molecular species, thermal behavior, and oxidative stability of PB and IB were compared. The total fatty acid compositions of PB and IB were similar but fatty acid positional distributions and TAG molecular species composition differed. IB contained 5–10 % more SFA at the sn‐2 position than corresponding PB. Furthermore, interesterification generated mono‐ and disaturated TAG species which resulted in broader melting profiles for IB. However, IB had lower oxidative stability than PB. The reformulation of food products with zero‐trans interesterified fats may be advantageous to the reduction of cardiovascular disease burden in the population.     

Frequency-dependent open-circuit acoustic sensitivity of fluid-filled, coated, radially polarized piezoelectric ceramic cylindrical shells of arbitrary thickness and infinite length

The frequency-dependent free-field open-circuit voltage generated by radially polarized piezoelectric ceramic fluid-filled shells of infinite length coated with an elastic layer and excited by a plane acoustic wave is studied. The shell and the coating are of arbitrary thickness and are anisotropic. It is shown that the charge density in the piezoelectric shell is zero by using the electrostatic and open-circuit conditions. General expressions for the pressures and radial velocities in the interior and exterior fluids are obtained by using the finiteness and radiation conditions, respectively. General expressions for the radial stresses and velocities in the piezoelectric shell and elastic coating are also determined by using two-dimensional equations of state and axisymmetric equations of motion. The coefficients in the general expressions are then determined by using the continuity conditions at the various interfaces. Finally, an expression for the open-circuit sensitivity is obtained by using a piezoelectric equation of state. Numerical results are presented for air, water, and vacuum in the interior, two types of elastic coating, and piezoelectric shells with various thicknesses. The effect of neglecting anisotropy on the sensitivity is also illustrated     

Carbon Nanotubes and Nanohorn Hybrid Composite Buckypaper as Microporous Layer for Proton Exchange Membrane Fuel Cell

In the present work, carbon nanotubes (CNT) and CNT‐carbon nanohorns (CNH) (0, 30, 50, 70 and 100 wt.% CNH) composite Buckypapers (BPs) were fabricated using vacuum filtration technique. Structure and property relation of composite BPs were studied using scanning electron microscope, four probe technique, BET surface area and contact angle measurements. Properties such as electrical conductivity, hydrophobic nature and microstructure of CNT‐30 wt.% CNH composite BP are superior to other composite BP. Hence, CNT‐30 wt.% CNH composite BP is chosen as a microporous layer (MPL) for PEMFCs and tested in fuel cell testing fixture. Polarization studies reveal that the cells performance with composite BPs is comparable with SGL‐MPL based cell. Hydrogen pumping and polarization studies of the cells confirms that composite BPs act as a good MPL at anode as well as cathode at 0.4 to 0.8 V. Hence, CNT‐CNH composite BPs are potential candidates for PEMFC applications.     

Familial glaucoma iridogoniodysplasia maps to a 6p25 region implicated in primary congenital glaucoma and iridogoniodysgenesis anomaly

Familial glaucoma iridogoniodysplasia (FGI) is a form of open-angle glaucoma in which developmental anomalies of the iris and irido-corneal angle are associated with a juvenile-onset glaucoma transmitted as an autosomal dominant trait. A single large family with this disorder was examined for genetic linkage to microsatellite markers. A peak LOD score of 11.63 at a recombination fraction of 0 was obtained with marker D6S967 mapping to chromosome 6p25. Haplotype analysis places the disease gene in a 6.4-cM interval between the markers D6S1713 and D6S1600. Two novel clinical appearances extend the phenotypic range and provide evidence of variable expressivity. The chromosome 6p25 region is now implicated in FGI, primary congenital glaucoma, and iridogoniodysgenesis anomaly. This may indicate the presence of a common causative gene or, alternatively, a cluster of genes involved in eye development/function.     

Stackable nonvolatile memory with ultra thin polysilicon film and low-leakage (Ti, Dy)xOy for low processing temperature and low operating voltages

We report the fabrication process as well as material and electrical characterization of ultra thin body (UTB) thin film transistors (TFTs) for stackable nonvolatile memories by using in situ phosphorous doped low-temperature polysilicon followed by the chemical mechanical polishing (CMP) process. The resulting polysilicon film is about 13 nm thick with approximately 10¹⁹ cm⁻³ doping. Root mean square surface roughness below 1 nm is achieved. Metal nanocrystals and high-k dielectric are selected for storage nodes and tunneling barriers to achieve low operating voltages. The number density and average diameter of nanocrystals embedded in the gate stack are 7.5 × 10¹¹ cm⁻² and 5.8 nm, respectively. Furthermore, scanning transmission electron microscopy (STEM), convergent beam electron diffraction (CBED) and electron energy loss spectroscopy (EELS) are performed for material characterization. The dielectric constant of the (Ti, Dy)_xO_y film is 35, and the off-state leakage current at −1 V bias and 2.8 nm equivalent oxide thickness is 5 × 10⁻⁷ A/cm². We obtain a memory window of about 0.95 V with ±6 V program/erase voltages. Our results show that UTB TFT is a promising candidate for the three-dimensional integration in high-density nonvolatile memory applications.     

Cavernous haemangioma of the iris in a leprosy patient

We report a case of a male infant who presented with congenital anomalies and was found to have a de novo deletion in the terminal region of the long arm of chromosome 9. He died at the age of 17 weeks of cardiorespiratory failure owing to RSV positive bronchiolitis. A review of previously published reports documented one previous report of a patient with a deletion of (9)(q34.3) and multiple congenital anomalies. Comparison with the previously reported case suggests that the phenotype observed constitutes a clinically recognisable pattern of malformations.     

Food for thought: a critique on the hypothesis that endogenous cholecystokinin acts as a physiological satiety factor

This review evaluates the various lines of evidence supporting the hypothesis that cholecystokinin (CCK) released from the small intestine during feeding plays a physiological satiety. Issues considered include, the effects of systemic injection of CCK on consummatory and operant feeding, the role of the vagus nerve, the effects of CCKB receptor antagonists, and the neuroendocrine responses to exogenous CCK. A critical appraisal of this research indicates that while it is clearly demonstratable that exogenous peripheral CCK can alter food intake by acting on CCKA receptors, the mechanism involved may be more closely related to the induction if aversion and nausea, rather than satiety. With regard to peripheral endogenous CCK, the available evidence also does not seem to support a role for the hormone in satiety. In particular, it is doubtful whether plasma concentrations of CCK following a meal are sufficiently high to inhibit feeding. Moreover, CCKA receptor antagonist which do not cross the blood brain barrier fail to increase meal size, as would be expected if peripheral CCK was an effective satiety factor. In addition, the recent literature concerned with the possibility that CCK may have a direct action within the brain in the control of food intake has been reviewed. These studies show that CCK administered intracerebroventicularly, or by micoinjection into discrete brain regions, also inhibits feeding via a CCKA receptor mechanism. However, the physiological relevance of these findings have yet to be determined.