Scalability and performance of an agent‐based network management middleware

Rapid growth of computer network sizes and uses necessitate analysis of network application middleware in terms of its scalability as well as performance. In this paper we analyze a distributed network management middleware based on agents that can be dispatched to locations where they can execute close to the managed nodes. The described middleware operates between the network protocol layer and the application layer and uses standard TCP protocol and SNMP probes to interface the network. By aggregating requests from many users into a single agent, our system allows multiple managers to probe problem areas with minimal management traffic overhead. We discuss and quantify the benefits of the described middleware by implementing real‐time network managers using our system. The main result of this paper is a comparison of scalability and efficiency of our agent‐based management middleware and traditional SNMP‐based data collection. To this end, we measured traffic in both real and simulated networks. In the latter case, we designed, used and described here a method of separating simulated application flow into separate subflows to simplify design of simulations. Copyright © 2004 John Wiley & Sons, Ltd.     

Finite‐Element Implementation of a Self‐consistent Texture Model with a Hardening Law Based on Dislocation Densities

A self‐consistent texture model is implemented in the finite‐element code ABAQUS/Explicit®. Hardening of the slip systems is described by evolution laws for dislocation densities, and the Bauschinger effect is included. With these ingredients the cold rolling of an IF‐steel is simulated and the evolution of texture and anisotropy is examined. The use of the dislocation based hardening law is found to have a significant effect on the evolution of the anisotropic yield surface, but only very little influence on the texture. Furthermore, the hardening model is used to investigate the evolution of dislocation densities in differently oriented grains during plane strain compression. It is found that the dislocation density varies greatly depending on orientation, an observation which can help to explain the orientation dependence of recrystallization.     

On the computation of conjugacy classes of Chevalley groups

In this paper an algorithm is presented to determine the number of semisimple conjugacy classes for a given centralizertype for the Chevalley groupsSL _n(q) andSU _n(q). Moreover we give the exact number of regular semisimple classes of this groups and a summary of results on the generic classnumber of exceptional Chevalley groups of adjoint type.The first author acknowledges financial support by a grant of the Deutsche Forschungsgemeinschaft     

Hilfsmittel zum Auffinden einer ersten Gestalt beim methodischen Konstruieren: Gestaltbeeinflussung durch die Verwendung physikalischer Effekte

Zusammenfassung Ziel des Teilvorhabens, über das hier berichtet wird, was es, für eine Auswahl von physikalischen Effekten eine Zuordnung von gestaltbeeinflussenden Merkmalen auf sehr abstrakter Ebene zu erreichen und damit eine n?here Charakterisierung der Wirkfl?chen und Wirkr?ume zu erreichen die zur Umsetzung eines physikalischen Effektes notwendig sind. Die hieraus resultierenden Ergebnisse sind dem Abschlu?bericht zu entnehmen [1]. Weiterführende Themen, die basierend auf den vorliegenden Erkenntnissen bearbeitet werden, haben zum Ziel, die wesentlichen und entscheidenden Parameter einer Konstruktionsaufgabe zu erkennen und zukünftig zielgerichtet L?sungsvarianten zu erstellen, um somit für eine Neukonstruktion sinnvolle L?sungsfelder sehr frühzeitig abzugrenzen.     

Zu einem Phänomen der Lochkorrosionsbegrenzung bei hochlegierten Sonderedelstählen und NiCrMo-Legierungen in Chloridlösungen

On a phenomenon of the limitation of pitting corrosion at high alloyed special stainless steels and NiCrMo-alloys in chloride solutions Testing the pitting corrosion resistance of high alloyed special stainless steels and NiCrMo-alloys in chloride solutions there was observed a limitation of the pitting corrosion range toward more positive potentials. Above this limitation, the so-called pitting corrosion limitation potential, the pit initiation by all means is prevented, but the growth of pits which had been initiated before in the pitting corrosion range not necessarily comes to a stop. Therefore current density-potential curves which are obtained by downward polarization after an initial potential jump into the transpassive region and chronopotentiostatic tests are more suitable to investigate this phenomenon than cyclic polarization measurements and potentiostatic alteration tests. There is indicated a dependence of this phenomenon on temperature. The phenomenon of a limitation of the pitting corrosion range toward more positive potentials has been found until now at alloy 926, alloy 31, alloy 28, alloy 59 and alloy C-276.     

Minimum spanning trees made easier via multi-objective optimization

Many real-world problems are multi-objective optimization problems and evolutionary algorithms are quite successful on such problems. Since the task is to compute or approximate the Pareto front, multi-objective optimization problems are considered as more difficult than single-objective problems. One should not forget that the fitness vector with respect to more than one objective contains more information that in principle can direct the search of evolutionary algorithms. Therefore, it is possible that a single-objective problem can be solved more efficiently via a generalized multi-objective model of the problem. That this is indeed the case is proved by investigating the computation of minimum spanning trees.This work was supported by the Deutsche Forschungsgemeinschaft (DFG) as part of the Collaborative Research Center Computational Intelligence (SFB 531) and by the German-Israeli Foundation (GIF) in the project Robustness Aspects of Algorithms.     

Crystallization of Polymer-Derived Silicon Carbonitride at 1873 K under Nitrogen Overpressure

The chemical stability of an amorphous silicon carbonitride ceramic, having the composition 0.57SiC·0.43Si₃N₄·0.49C is studied as a function of nitrogen overpressure at 1873 K. The ceramic suffers a weight loss at p _N2 < 3.5 bar (1 bar = 100 kPa), does not show a weight change from 3.5 to 11 bar, and gains weight above 11 bar. The structure of the ceramic changes with pressure: it is crystalline from 1 to 6 bar, amorphous at ∼10 bar, and is crystalline above ∼10 bar. The weight-loss transition, at 3.5 bar, is in excellent agreement with the prediction from thermodynamic analysis when the activities of carbon, SiC, and Si₃N₄ are set equal to those of the crystalline forms; this implies that the material crystallizes before decomposition. The amorphous to crystalline transition that occurs at ∼10 bar, and which is accompanied by weight gain, is likely to have taken place by a different mechanism. A nucleation and growth reaction with the atmospheric nitrogen is proposed as the likely mechanism. The supersaturation required to nucleate α-Si₃N₄ crystals is calculated to be 30 kJ/mol.     

An investigation of seated postural stability

Results of tests undertaken to identify which measures of seated posture control are most effective in two areas, distinguishing differences in the x and y direction control strategies for a given task and distinguishing differences in overall control strategies for pairs of different tasks, are presented. The test platform, calibration tests, test protocol, and data analysis method are described. The results of statistical analyses performed on the data are summarized     

Sparking at cathode tools during electrochemical machining in flow-through cells

The current density used in electrochemical machining can be increased only up to a certain value, above which the formation of electric sparks on the cathode (tool) is observed, whereby the latter is damaged and the anode surface becomes rough. The present work is devoted to the measurement of this critical density for small metal cathodes placed on the wall of a flow-through channel for Reynolds numbers from 1265 up to 5902 and static pressures ranging from 0.1 up to 1.0 MPa. The results are correlated by criterion equations which gave values of critical (sparking) cathodic current density,j _s, with an average error of 7.1 % for laminar flow and 4.1 % for turbulent flow. The equations can be used for the calculation of the sparking current density for industrial flow-through cells for electrochemical machining.