The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.     

Supplementing with L-Tryptophan Increases Medium Protein and Alters Expression of Genes and Proteins Involved in Milk Protein Synthesis and Energy Metabolism in Bovine Mammary Cells

The objective of this study was to investigate the effects of supplementing with L-tryptophan (L-Trp) on milk protein synthesis using an immortalized bovine mammary epithelial (MAC-T) cell line. Cells were treated with 0, 0.3, 0.6, 0.9, 1.2, and 1.5 mM of supplemental L-Trp, and the most efficient time for protein synthesis was determined by measuring cell, medium, and total protein at 0, 24, 48, 72, and 96 h. Time and dose tests showed that the 48 h incubation time and a 0.9 mM dose of L-Trp were the optimal values. The mechanism of milk protein synthesis was elucidated through proteomic analysis to identify the metabolic pathway involved. When L-Trp was supplemented, extracellular protein (medium protein) reached its peak at 48 h, whereas intracellular cell protein reached its peak at 96 h with all L-Trp doses. β-casein mRNA gene expression and genes related to milk protein synthesis, such as mammalian target of rapamycin (mTOR) and ribosomal protein 6 (RPS6) genes, were also stimulated (p < 0.05). Overall, there were 51 upregulated and 59 downregulated proteins, many of which are involved in protein synthesis. The results of protein pathway analysis showed that L-Trp stimulated glycolysis, the pentose phosphate pathway, and ATP synthesis, which are pathways involved in energy metabolism. Together, these results demonstrate that L-Trp supplementation, particularly at 0.9 mM, is an effective stimulus in β-casein synthesis by stimulating genes, proteins, and pathways related to protein and energy metabolism.     

Bayesian estimation of Dirichlet mixture model with variational inference

In statistical modeling, parameter estimation is an essential and challengeable task. Estimation of the parameters in the Dirichlet mixture model (DMM) is analytically intractable, due to the integral expressions of the gamma function and its corresponding derivatives. We introduce a Bayesian estimation strategy to estimate the posterior distribution of the parameters in DMM. By assuming the gamma distribution as the prior to each parameter, we approximate both the prior and the posterior distribution of the parameters with a product of several mutually independent gamma distributions. The extended factorized approximation method is applied to introduce a single lower-bound to the variational objective function and an analytically tractable estimation solution is derived. Moreover, there is only one function that is maximized during iterations and, therefore, the convergence of the proposed algorithm is theoretically guaranteed. With synthesized data, the proposed method shows the advantages over the EM-based method and the previously proposed Bayesian estimation method. With two important multimedia signal processing applications, the good performance of the proposed Bayesian estimation method is demonstrated.     

A memetic algorithm for minimizing the total weighted completion time on a single machine under step-deterioration

In this paper, we consider minimizing total weighted completion time criteria on a single machine. Jobs processing times are step function of its starting time and all jobs have a common due date. First, we present some new lemmas and dominance properties for this NP-hard problem, and then a memetic algorithm using these properties is developed. We compare the solutions of the memetic algorithm with optimal solutions obtained from complete enumeration. The results show that the average percentage error of the proposed algorithm from optimal solutions is about 2% and as the variance of processing time increase, the percentage errors decrease.     

High throughput blood plasma separation using a passive PMMA microfluidic device

Since plasma is rich in many biomarkers used in clinical diagnostic experiments, microscale blood plasma separation is a primitive step in most of microfluidic analytical chips. In this paper, a passive microfluidic device for on-chip blood plasma separation based on Zweifach–Fung effect and plasma skimming was designed and fabricated by hot embossing of microchannels on a PMMA substrate and thermal bonding process. Human blood was diluted in various times and injected into the device. The main novelty of the proposed microfluidic device is the design of diffuser-shaped daughter channels. Our results demonstrated that this design exerted a considerable positive influence on the separation efficiency of the passive separator device, and the separation efficiency of 66.6 % was achieved. The optimum purity efficiency of 70 % was achieved for 1:100 dilution times.     

A Study of the Effect of Aluminium on the Mechanochemical Reduction of Hematite by Graphite

The effect of addition of small amounts of aluminium on mechano‐chemical reduction of hematite by graphite was studied. Various amounts of aluminium (0 to 10%) were added to a hematite‐graphite mixture, in which C/O ratio was 1:1. The hematite‐graphite‐aluminium mixtures were then subjected to ball milling followed by heating up reduction. The heating up reduction was carried out in Ar atmosphere, using TG‐DTA device. In TG‐DTA experiments, samples were heated by a constant heating rate of 10 °C/min from room temperature up to 1100 °C and maintained for 30 minutes at this temperature. To clarify the reactions which took place during milling and heating up reduction, the samples were subjected to XRD examinations. It was found that the heat generated during exothermic reaction of aluminothermic reduction of hematite promoted the endothermic reaction of carbothermic reduction. In the course of heating up reduction, the carbothermic reaction occurred just after aluminothermic reaction. Increasing of aluminum content from 0 to 10% in 2 hours ball milled samples decreased the temperature of carbothermic reaction from 1020 °C to about 860 °C. The further ball milling of the samples up to 5 and 10 hours, for the samples containing 10 and 5% aluminium respectively, caused the decrease of the temperature of aluminothermic and carbothermic reactions to around the melting point of aluminium.     

Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method

In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5?hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600?mg/mL), temperature (T) of reaction system (303 K and 333?K [30?°C and 60?°C]), stirring times (ST) of reaction media (4 and 12?hours), stirring speed (SS) being adjusted to 400 and 600?rpm, and rinsing times (RT) of remained filtrates (1 and 3?hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using L₈ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3?hours), RS2 (2 molar NaOH), P/S2 (100/600?mg/mL), T2 (333?K [60?°C]), ST2 (12?hours), SS1 (400?rpm), and RT1 (1?hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method.     

Proximity effects of a layered periodic structure on miniaturization of patch antennas

A miniaturized microstrip antenna on a planar layered periodic structure is proposed, designed and fabricated. The proposed structure miniaturizes patch antennas in the microwave band. With varying the parameters of the proposed structure, the achieved miniaturization factor can be adjusted in the range 2.6–4.2. Numerical and experimental results are presented. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Effect of different size of joint enlargement on seismic behavior of gravity load designed RC beam‐column connections

Effect of different size of planer joint enlargement as a noninvasive and practical strategy for seismic retrofit of gravity load designed external reinforced concrete beam‐column connections was experimentally investigated. The joint region was enlarged using steel angles that are mounted using prestressed cross‐ties. Reverse cyclic load tests on five half‐scale control and retrofitted external RC beam‐column connections were conducted. Three different size of planer joint enlargement being 180, 140, and 90 mm were considered for retrofitted specimens. The performance of the retrofitted specimens is compared with that of the control gravity load designed beam‐column connections, in terms of load–displacement hysteresis curve, energy dissipation and ductility capacities, and global strength and stiffness degradation behavior. The experimental results showed that increasing the size of planer joint enlargement significantly enhances the seismic capacity of the retrofitted connections, in terms of strength, stiffness, energy dissipation, and ductility capacity and also planer joint enlargement can relocate beam plastic hinges to outside the joint panel.