Enhanced hydrogen-assisted cracking of 1,3,5-triisopropylbenzene over fibrous silica ZSM-5: Influence of co-surfactant during synthesis

In this study, unique fibrous silica ZSM-5 was successfully synthesized by using three type of alcohol possessing different alkyl-chain length as the co-surfactant. The effect of diverse co-surfactant was observed in the changes of physical properties, such as crystallinity, inter-dendrimer distances and pore properties. According to the IR and temperature programmed desorption of ammonia (NH₃-TPD) analyses, all catalysts exhibited different acid strengths which could be triggered by the different amount of additional silica species. All catalysts exhibited high catalytic performance in the hydrocracking of 1,3,5-triisopropylbenzene due to the absence of diffusion limitation. However, FZSM5C3 exhibited the highest catalytic activity which corresponded to its high number of Brønsted acid sites. It was observed that different length of co-surfactant alkyl-chain has resulted in different degree of oil penetration into the microemulsion system which subsequently triggered in various inter-dendrimer distances and amount of incorporated silica species. Hence, the altered physicochemical properties led to the difference in catalytic performance due to the presence of different number of Brønsted acid sites.     

Unique structure of fibrous ZSM-5 catalyst expedited prolonged hydrogen atom restoration for selective production of propylene from methanol

A unique mesostructured fibrous silica@ZSM-5 (HSi@ZSM-5) catalyst was synthesized via microemulsion ZSM-5 zeolite seed assisted synthesis method and successfully applied in enhanced propylene formation in methanol to olefin (MTO) process. Characterization of the catalysts were carried out by FESEM, TEM, XRD, TGA, N₂ adsorption-desorption, NH₃ and KBr probed FTIR. Catalytic performance of as-synthesized catalyst was examined using a micro-pulse reactor and compared with the commercial HZSM-5. The reaction mechanism was elucidated by in-situ methanol FTIR spectroscopy. It was found that HSi@ZSM-5 produced higher propylene selectivity (56%) and was stable for long time on stream (80 h), nearly three-fold higher than that of commercial HZSM-5. In addition, HSi@ZSM-5 displayed higher rate of methanol dehydration, surface methoxy species generation and olefin methylation, indicating that alkene catalytic cycle is the dominant reaction mechanism. The higher selectivity towards propylene was correlated to the existence of moderate acidity which impeded the formation of paraffins and polymethylbenzene intermediates. These observations are further supported by KBr probed FTIR findings which revealed negligible paraffinic carbon species on HSi@ZSM-5. Thus, the unique fibrous silica@ZSM-5 retarded coke deposition due to suppression of undesired side reactions thereby signifying intensified propylene formation, which is highly desirable in commercial MTO processes.     

Effect of different size of joint enlargement on seismic behavior of gravity load designed RC beam‐column connections

Effect of different size of planer joint enlargement as a noninvasive and practical strategy for seismic retrofit of gravity load designed external reinforced concrete beam‐column connections was experimentally investigated. The joint region was enlarged using steel angles that are mounted using prestressed cross‐ties. Reverse cyclic load tests on five half‐scale control and retrofitted external RC beam‐column connections were conducted. Three different size of planer joint enlargement being 180, 140, and 90 mm were considered for retrofitted specimens. The performance of the retrofitted specimens is compared with that of the control gravity load designed beam‐column connections, in terms of load–displacement hysteresis curve, energy dissipation and ductility capacities, and global strength and stiffness degradation behavior. The experimental results showed that increasing the size of planer joint enlargement significantly enhances the seismic capacity of the retrofitted connections, in terms of strength, stiffness, energy dissipation, and ductility capacity and also planer joint enlargement can relocate beam plastic hinges to outside the joint panel.     

Enhancement in Physical Properties of Silver-Doped Fe–Ni Invar Nano-alloy Using Chemical Reduction Method

Journal of Superconductivity and Novel Magnetism - Silver-substituted Fe–Ni nano invar alloy is a new and innovative field of research due to their interesting invar, magnetic and electrical...     

Platinum‐promoted fibrous silica Y zeolite with enhanced mass transfer as a highly selective catalyst for n‐dodecane hydroisomerization

A fibrous silica zeolite Y (HY@KCC‐1) catalyst with a high surface area of 568 m²/g and unique core‐shell morphology was successfully synthesized via a modified KCC‐1 synthesis method. Characterization of the catalysts was achieved with X‐ray powder diffraction (XRD), field emission scanning microscope (FESEM), N₂ adsorption/desorption, and 2,6‐dimethylpyridine adsorbed Fourier‐transform infrared spectroscopy (FTIR). The Pt/HY@KCC‐1 has displayed complete n‐dodecane conversion coupled with an incredibly enhanced isomer yield of 72% at 350°C, nearly two‐fold higher than that of unmodified Pt/HY catalyst. Remarkably, Pt/HY@KCC‐1 had an internal effectiveness factor (η) of unity and negligible internal diffusion limitation, thus suggesting its potential application in hydroisomerization of higher hydrocarbons for enhancing fuel properties.     

Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method

In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5?hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600?mg/mL), temperature (T) of reaction system (303 K and 333?K [30?°C and 60?°C]), stirring times (ST) of reaction media (4 and 12?hours), stirring speed (SS) being adjusted to 400 and 600?rpm, and rinsing times (RT) of remained filtrates (1 and 3?hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using L₈ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3?hours), RS2 (2 molar NaOH), P/S2 (100/600?mg/mL), T2 (333?K [60?°C]), ST2 (12?hours), SS1 (400?rpm), and RT1 (1?hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method.     

Proximity effects of a layered periodic structure on miniaturization of patch antennas

A miniaturized microstrip antenna on a planar layered periodic structure is proposed, designed and fabricated. The proposed structure miniaturizes patch antennas in the microwave band. With varying the parameters of the proposed structure, the achieved miniaturization factor can be adjusted in the range 2.6–4.2. Numerical and experimental results are presented. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.