Effects of Hall current and two temperatures in transversely isotropic magnetothermoelastic with and without energy dissipation due to ramp-type heat

The present article is concerned with the investigation of disturbances in a homogeneous transversely isotropic thermoelastic rotating medium with two temperatures, in the presence of the combined effects of Hall currents and magnetic field. The formulation is applied to the thermoelasticity theories developed by Green-Naghdi theories of type-II and type-III. Laplace and Fourier transform techniques are applied to solve the problem. The analytical expressions of displacements, stress components, temperature change, and current density components are obtained in the transformed domain. A numerical inversion technique has been applied to obtain the results in the physical domain. Numerical simulated results are depicted graphically to show the effect of Hall current and two temperatures on resulting quantities. Some special cases are also deduced from the present investigation.     

Deformation due to expanding ring load in modified couple stress thermoelastic diffusion in time and frequency domain

The two-dimensional problem of expanding ring load in a modified couple stress theory of thermoelastic diffusion with heat sources in time and frequency domains is investigated. The mathematical formulation prepared for thermoelastic diffusion solids with one and two relaxation times using Laplace and Hankel transforms. The displacements, stress components, temperature change, and chemical potential are obtained in a transformed domain. Numerical computation is performed for these quantities and the resulting quantities are shown graphically for the time and frequency domains. Comparisons are made with the results predicted by the two theories and different values of time and frequency. Particular cases of interest are also deduced.     

Viscous effect at an orthotropic micropolar boundary surface

Steady state responses at viscous fluid/ orthotropic micropolar solid interfaces to moving point loads have been studied. An eigenvalue approach using the Fourier transform has been employed to solve the problem. The displacement, microrotation and stress components for the orthotropic micropolar solids so obtained in the physical domain are computed numerically by applying numerical inversion technique. Viscosity and anisotropy effects on normal displacement, normal force stress and tangential couple stress have been shown graphically for a particular model. Some special cases of interest have been presented.     

Numerical investigation of heat transfer and friction factor in ribbed triangular duct solar air heater using Computational fluid dynamics (CFD)

Journal of Mechanical Science and Technology - The Computational fluid dynamics (CFD) based analysis is carried out to investigate the thermal and hydraulic performance of circular rib roughened...     

Internalization of Escherichia coli O157:H7 following biological and mechanical disruption of growing spinach plants

The internalization and persistence of a bioluminescent Escherichia coli O157:H7 Ph1 was investigated in growing spinach plants that had been either biologically or mechanically damaged. In control (undamaged) plants cultivated in soil microcosms inoculated with E. coli O157:H7 Phl, the bacterium was recovered from surface-sterilized root tissue but not from leaves. Mechanical disruption of the seminal root and root hairs of the plants did not result in the internalization of the pathogen into the aerial leaf tissue. When imprints of the root tissue were made on plates of tryptic soy agar plus ampicillin, no colonies of E. coli O157:H7 were observed around damaged tissue. The roots of growing plants were exposed to the northern root-knot nematode, Meloidogyne hapla, in the presence of E. coli O157:H7. Although this treatment caused knot formation on the roots, it did not enhance the internalization of the bacterium into the plant vascular system. Coinoculation of intact leaves with E. coli O157:H7 and the phytopathogen Pseudomonas syringae DC3000 resulted in localized necrosis, but the persistence of the human pathogen was not affected. The mechanical disruption of roots does not result in the internalization of E. coli O157:H7 into the aerial tissue of spinach, and there does not appear to be any effect of P. syringae in terms of enhancing the persistence of E. coli O157:H7 in spinach leaves.     

A fuzzy reinforcement learning approach to thermal unit commitment problem

Unit commitment problem (UCP) aims at optimizing generation cost for meeting a given load demand under several operational constraints. We propose to use fuzzy reinforcement learning (RL) approach for efficient and reliable solution to the unit commitment problem. In particular, we cast UCP as a multiagent fuzzy reinforcement learning task wherein individual generators act as players for optimizing the cost to meet a given load over a twenty-four-hour period. Unit commitment task has been fuzzified, and the most optimal unit commitment solution is generated by employing RL on this fuzzy multigenerator setup. Our proposed multiagent RL framework does not assume any a priori task or system knowledge, and the generators gradually learn to produce most optimal output solely based on their collective generation. We look at the UCP as a sequential decision-making task with reward/penalty to reduce the collective generation cost of generators. To the best of our knowledge, ours is a first attempt at solving UCP by employing fuzzy reinforcement learning. We test our approach on a ten-generating-unit system with several equality and inequality constraints. Simulation results and comparisons against several recent UCP solution methods prove superiority and viability of our proposed multiagent fuzzy reinforcement learning technique.

     

Thermal modeling of drilling process in titanium alloy (Ti-6Al-4V)

Abstract

In drilling in titanium alloys, heat trapped in a hole adversely affects tool life, hole surface quality and integrity. Therefore, modeling temperature distribution in drilling is vital for effective heat dissipation and improving quality of drilled surfaces. The existing numerical and finite element models consider only frictional heat, whereas the effect of shear heat generation and tertiary heat generation is neglected. In the present work, a comprehensive thermal model of the drilling process is developed by considering all heat generated in shear, friction and tertiary zones. The drill cutting edges are divided into a series of independent elementary cutting tools (ECT). The calculated heat flux loads are applied on an individual ECT in the finite element model to determine the temperature distribution and the maximum temperature around the cutting edge. The temperature in the drill was also measured experimentally with the help of an Infrared (IR) camera. The results of numerical simulations lie within the error of ～8.75% when compared to the prior studies, and ～5.41% when compared to our experimental work. The thermal model gives the temperature distribution, and the maximum temperature observed at the corner of cutting edge was 604.2°C at a cutting speed of 35?m/min.     

Using multi-hub structures for international R&;D: Organisational inertia and the challenges of implementation

Abstract and Key Results

Experimental Study of Parameters of a Plasma Antenna

A plasma column excited by a surface wave can act as a plasma antenna. Experiments are carried out to study the current and conductivity distributions, field, power patterns, directivity and efficiency of such a plasma antenna. In addition, an equivalent metallic copper antenna is built up and its antenna parameters are compared with that of the plasma antenna. Our findings indicate that the power content in the harmonics of the plasma antenna is more prominent as compared to the copper antenna (which only generates a fundamental frequency). However, the power patterns for both antennae are quite similar. To provide a more qualitative understanding regarding the generation of harmonics in the field of the plasma antenna, a bi-spectral analysis is performed to study the nonlinear interactions in the current fluctuations. Some specific features of the plasma antenna are investigated in our study, which may enhance the application prospect of the plasma antenna with respect to the conventional metallic antenna.     

Interfacial temperature measurements,high-speed visualization and finite-element simulations of droplet impact and evaporation on a solid surface

The objective of this work is to investigate the coupling of fluid dynamics, heat transfer and mass transfer during the impact and evaporation of droplets on a heated solid substrate. A laser-based thermoreflectance method is used to measure the temperature at the solid–liquid interface, with a time and space resolution of 100 μs and 20 μm, respectively. Isopropanol droplets with micro- and nanoliter volumes are considered. A finite-element model is used to simulate the transient fluid dynamics and heat transfer during the droplet deposition process, considering the dynamics of wetting as well as Laplace and Marangoni stresses on the liquid–gas boundary. For cases involving evaporation, the diffusion of vapor in the atmosphere is solved numerically, providing an exact boundary condition for the evaporative flux at the droplet–air interface. High-speed visualizations are performed to provide matching parameters for the wetting model used in the simulations. Numerical and experimental results are compared for the transient heat transfer and the fluid dynamics involved during the droplet deposition. Our results describe and explain temperature oscillations at the drop–substrate interface during the early stages of impact. For the first time, a full simulation of the impact and subsequent evaporation of a drop on a heated surface is performed, and excellent agreement is found with the experimental results. Our results also shed light on the influence of wetting on the heat transfer during evaporation.