Creep fracture by slow crack growth is studied in a medium density polyethylene at 60 °C and 80 °C. Whereas elastic-plastic fracture mechanics load parameters fail to provide a unique temperature-independent correlation, that of the fracture mechanics for creeping solids C∗ is proved to be relevant since this parameter correlates very well with the time to failure. Correlation established on both full notched creep tensile and double edge notched tensile tests was validated on cracked gas-pipe samples tested under hydrostatic pressure, extending the use of time to failure versus C∗ diagram to predict lifetime of engineering components. 相似文献
Capabilities of enhanced simulated-annealing-based algorithms in solving process planning problems in reconfigurable manufacturing are investigated. The algorithms are enhanced by combining variants of the simulated annealing technique with other algorithm concepts such as (i) knowledge exploitation and (ii) parallelism. Four configurations of simulated annealing algorithms are devised and engaged to solve an instance of a process planning problem in reconfigurable manufacturing systems. These configurations include; a basic simulated annealing algorithm, a variant of the basic simulated annealing algorithm, a variant of the simulated annealing algorithm coupled with auxiliary knowledge and a variant of the simulated annealing algorithm implemented in a quasi-parallel architecture. Although differences in performances were observed, the implemented algorithms are capable of obtaining good solutions in reasonable time. Experimental results show that the performances of the variants of simulated annealing based algorithms are better in comparison to a basic simulated annealing algorithm. A computational analysis and comparison using ANOVA indicates that improvements towards a better optimal solution can be gained by implementing variants of the simulated annealing algorithm. In addition, little speed gains can be obtained by implementing variants of the simulated annealing algorithms that are coupled with other algorithmic concepts. 相似文献
For composites to compete in vehicle suspension applications, it is essential to control their failure by utilising their strength in principal direction instead of shear. This can be achieved efficiently by employing a new configuration instead of existing one. This study marries between an elliptical configuration and the woven roving composites.
In this paper, the influence of ellipticity ratio on performance of woven roving wrapped composite elliptical springs has been investigated both experimentally and numerically. A series of experiments was conducted for composite elliptical springs with ellipticity ratios (a/b) ranging from one to two. Typical failure histories of their failure mechanism are presented and discussed. In general, this study demonstrated that composites elliptical spring can be used for light and heavy trucks and meet the requirements, together with substantial weight saving. The results showed that the ellipticity ratio significantly influenced the spring rate and failure loads. Composite elliptic spring with ellipticity ratios of a/b 2.0 displayed the highest spring rate. 相似文献
Using hot aggregates, in concrete production, results in a drop in compressive strength of the produced concrete. Various methods have been proposed for cooling concrete aggregates. This paper proposes new two designs for aggregates cooling systems for various production rate demands. Conveyor system for small to moderate production rates and rotating drum for high production rates. Simulation of the heat flow during the cooling process over the conveyor and through the drum are analyzed with the objective of understanding the effect of the various design parameters and achieving minimum cooling time with the least possible power. Finite element models for the new designs are proposed and discussed. The results of the finite element analysis of the new designs are presented for various initial conditions and cooling rates. 相似文献
There is a small subset of any repairable component population that can develop a failure mode outside the scope of the standard
repair and overhaul procedures, which makes them “rogue”. When this happens, a Darwinian-like “natural selection” phenomenon
ensures that they will be placed in the most disadvantageous position in the asset management program, negatively affecting
multiple aspects of the operational and maintenance organizations. Rogue components have long plagued the airline industry
and created havoc in their asset management programs. In this paper, we describe how these rogues develop, outline the natural
selection process that leads to their hampering the asset management program, and examine some of the negative impacts that
ensue. Then we propose a Condition based maintenance approach to control the development of these components. We explore the
use of a supervised learning data mining technique called Logical analysis of data (LAD) in CBM for the purpose of detecting
rogues within a population of repairable components. We apply the resulting LAD based decision model on an inventory of turbo
compressors belonging to an airline fleet. Finally, we evaluate the applicability of LAD to the rogue component detection
problem and review its efficiency as a decision model for this type of problem. 相似文献
Brown tumors (BTs) are relatively uncommon but they are serious complications of renal osteodystrophy. The objective of this study was to analyze the clinical, biological, and radiological characteristics of 16 patients with BTs provoked by secondary hyperparathyroidism (sHPT) and its response to the decrease in parathyroid hormone levels after parathyroidectomy (PTX). The management of that uncommon condition was also reviewed. We conducted a retrospective study including 16 end‐stage renal disease patients who underwent subtotal PTX between 1997 and 2007 for severe sHPT with BTs. Our study included 10 men and 6 women, whose average age was 34 years. All patients were on dialysis. Ten of them were on dialysis for more than 5 years. The median duration on dialysis was 84 months. Patients included suffered from swellings associated with functional limitations. BTs had multiple locations in 7 patients. Jaw was the most frequent location (62%). Radiography and tomodensitometry demonstrated a mixed radio lucent and radio‐opaque lesions with an expansion of the cortical bone. Bone scan demonstrated an increased uptake of lesions. Chirurgical treatment was indicated in all cases because of severe refractory sHPT with functional limitations and/or disfiguring deformities. In all cases, BTs stopped its progression and even decreased in size. However, it was insufficient in four cases, which required a surgical resection. PTX remains an efficacious approach in resistant cases of sHPT with persistent BTs. 相似文献
Waste electrical and electronic equipment (WEEE) generated in emerging countries is increasing. This study presents a methodology to improve assessment and monitoring WEEE in Algeria. The proposed methodology is a two-step approach. The first step is the collection and collation of existing data from different national and international sources. In the second step, different assessment and forecasting methods are applied. Forecasting methods were selected from those models which provided minimum error indices. The paper considers also the availability and reliability of data in order to provide a future reliable assessment of WEEE in Algeria. The study revealed that the forecasting methods do not have a big influence on the results contrary to the inputs of the model. 相似文献
This paper presents a new approach called polynomial discrete Radon transform (PDRT), regarded as a generalization of the classical finite discrete Radon transform. Specifically, the PDRT transforms an image into Radon space by summing the pixels according to polynomial curves. The PDRT can be applied on square \(p \times p\) images where \(p\) is assumed to be a prime number. It is based on a simple arithmetic operations and requires no data interpolation. An interesting property of the PDRT is its exact inversion. This means that an image can be transformed and then perfectly reconstructed. Through this study, we show that the new approach can be applied for some pattern recognition applications. 相似文献