Design, modeling, and hardware correlation of a 3.2Gb/s/pair memory channel

With the rapid advance of silicon process technology, it is now possible to design input/output (I/O) circuits that operate at multigigabit data rates. As a result, accurate modeling and analysis of high-speed interconnect systems is essential to optimize the performance of the overall system. This paper describes the interconnect design, modeling, simulation, and characterization methodologies that are essential to achieve multigigabit data rates. It focuses on the physical layer verification and hardware correlation of functional systems and silicon to ensure robust system operation over 3.2Gb/s data rate using conventional low-cost packaging and printed circuit board (PCB) technologies. In order to capture conductor and dielectric losses, as well as other high-frequency effects of three-dimensional structures, accurate measurement-based simulation techniques that directly incorporate frequency-domain parameters from measurement or electromagnetic solver parameters into circuit simulation tools using fast Fourier transform (FFT) and bandlimiting windowing techniques are developed. Finally, simulation waveforms are correlated with prototypes at both component and system levels in both time and frequency domains.     

影响碲镉汞晶体电子迁移率的主要因素

通过把迁移率的实测值与影响ＨｇＣｄＴｅ晶体电子迁移率的主要散射机构进行对比，得出结论：位错是ＨｇＣｄＴｅ晶体低温电子迁移率降低的主要原因。     

基于时间扩展的ASEHA建模与验证

为了有效地分析实时系统,在原计算模型的基础上,引入了时钟变量,在迁移上增加了时钟约束,扩展了异步扩展层次自动机的语义.运用基于时间扩展的ASEHA,分析了ATM系统,建立了用户和ATM的模型,并使用模型检测工具UPPAAL对模型进行验证,从无死锁、活性及可达性性质出发,验证了ATM系统的安全性.实验表明,提出的基于时间...     

基于属性基加密的车联网冷链物流配送目标隐私保护算法

针对车联网冷链物流中转与配送目标可被关联的问题,提出一种可有效泛化这种关联,进而保护配送目标的隐私保护算法.基于属性基加密技术,利用车联网中车辆可相互通信这一特点,通过同属性车辆解密建立匿名车辆组;利用匿名车辆组实现关联和配送目标泛化,进而保护配送目标的隐私安全.通过性能分析从理论上证明了安全性和算法效率,利用模拟对比实验,进一步验证了该算法的优越性.     

A novel PMA/PEG-based composite polymer electrolyte for all-solid-state sodium ion batteries

In recent years, development of all-solid-state batteries has become a promising approach to improve the safety of batteries. Herein, we report the preparation of a new composite polymer electrolyte (CPE) for use in all-solid-state sodium ion batteries. The CPE comprising of poly(methacrylate) (PMA), poly(ethylene glycol) (PEG), α-Al₂O₃ with acidic surface sites, and NaClO₄ exhibited high ionic conductivity (1.46 × 10^-4 S·cm^-1 at 70 °C), wide electrochemical stability window (4.5 V vs. Na⁺/Na), and good mechanical strength. With the introduction of the prepared CPE and Na₃V₂(PO₄)₃, the final all-solid-state sodium ion batteries showed good rate and cycle performance, with a high reversible capacity of 85 mAh·g^-1 when operated at 0.5 C (1 C = 118 mA·g^–1) and 94.1% capacity retention rate after 350 cycles at 70 °C. Our work provides a novel solid electrolyte for the development of all-solid-state sodium ion batteries.

Open image in new window

     

功率计划在特高压直流输电工程中的传输和实现

特高压直流输电工程直流输送功率按调度编制的日功率计划曲线运行,功率计划的下发和执行直接影响到直流系统的稳定运行。在深入研究104/101远动规约及特高压直流输电工程应用的基础上,对直流工程远动系统及自动化监控系统SCADA进行了功能扩展,在远动系统中实现了基于IEC60870-5-104/101的功率计划的调度实时远传、接收、解析、显示及存储。在自动化监控系统SCADA中实现了自动功率控制功能,向直流工程控制系统下发功率计划值,具备较高的实时性和可靠性。功率计划的实时传输和自动功率控制的实现能够有效地提高电网调度部门及换流站运行人员的工作效率,对进一步提高电网安全运行水平具有重要意义。     

半导体量子点在白光LED中涂覆厚度的确定

在蓝光LED上涂覆黄光量子点是合成白光LED的重要方法之一,确定量子点的涂覆厚度是合成白光的一个关键步骤。引入厚度系数来模拟厚度,证明了一定厚度范围内,厚度系数与厚度的线性关系。根据光谱的线性叠加以及能量守恒定律,建立数学模型,编程计算,结合实验,确定量子点厚度。按照模拟计算得到的厚度涂覆LED芯片,即可获得白光LED。本方法可以为实际生产提供指导,提高生产效率。     

Experimental Study of Sub-critical Velocity in Longitudinally Ventilated Tunnels

Fire Technology - The critical velocity is the minimum velocity blowing towards the fire seat in tunnels to reduce the length of back-layering to zero, and it has been extensively adopted in the...     

一种平面冗余机器人总性能最优的实时控制方法

提出了驱动集中布置概念冗余度机器人的结构设计方法,根据机器人逆运动学提出了基于加权M-P伪逆的预设空间降维法,并对加权矩阵进行了数值分析,通过改变加权矩阵对角线上元素的值进而改变瞬时速度,来改变各个关节角度的摆动幅度。对平面4R冗余机器人进行了动力学分析,将总能量、总力矩和总时间作为优化目标,利用粒子群优化方法对这三个指标同时进行优化,得到冗余度机器人总性能最优时的运动结束时间。进行了样机试制,实验结果证明所提方法可行。     

高功率横流CO2激光横模随时间变化的测量

用激光光束分析仪实时在线测量了一台连续运转的高功率横流CO2激光器的激光横模,获得了较为完整的激光横模随时间的变化关系.测量结果表明,激光输出由两个分离的、非对称的高阶横模叠加组成("双模"),两横模中心相距约8 mm.形成"双模"的原因是串接式谐振腔的前腔和后腔两者的中心轴线不重合以及阴极铜管形变.横模随激光器运行时间的延长而逐步蜕化,呈更高阶和复杂化趋向.初步分析表明,横模的时间变化主要与激光器连续运转过程中腔内气体组分发生的变化有关.