Distributed ledger technology in supply chains: a transaction cost perspective

With the emergence of distributed ledger technology (DLT), numerous practitioners and researchers have proclaimed its beneficial impact on supply chain transactions in the future. However, the vast majority of DLT initiatives are discontinued after a short period. With the full potential of DLT laying far down the road, especially managers in supply chain management (SCM) seek for short-term cost-saving effects of DLT in order to achieve long-term benefits of DLT in the future. However, the extant research has bypassed grounding long-term as well as short-term effects of DLT on supply chain transaction with empirical data. We address this shortcoming, following an abductive research approach and combining empirical data from a multiple case study design with the corresponding literature. Our study reveals that the effects of DLT on supply chain transactions are two-sided. We found six effects of DLT solutions that have a cost-reducing or cost avoidance impact on supply chain transactions. In addition, we found two effects that change the power distribution between buyers and suppliers in transactions and a single effect that reduces the dependency of supply chain transactions on third parties. While cost-reducing and avoidance as well as dependency-reducing effects are positive effects, the change in power distribution might come with disadvantages. With these findings, the paper provides the first empirical evidence of the impact of DLT on supply chain transactions, which will enable managers to improve their assessment of DLT usage in supply chains.     

A stiffness parameter and truncation error criterion for adaptive path following in structural mechanics

We explore a truncation error criterion to steer adaptive step length refinement and coarsening in incremental-iterative path following procedures, applied to problems in large-deformation structural mechanics. Elaborating on ideas proposed by Bergan and collaborators in the 1970s, we first describe an easily computable scalar stiffness parameter whose sign and rate of change provide reliable information on the local behavior and complexity of the equilibrium path. We then derive a simple scaling law that adaptively adjusts the length of the next step based on the rate of change of the stiffness parameter at previous points on the path. We show that this scaling is equivalent to keeping a local truncation error constant in each step. We demonstrate with numerical examples that our adaptive method follows a path with a significantly reduced number of points compared to an analysis with uniform step length of the same fidelity level. A comparison with Abaqus illustrates that the truncation error criterion effectively concentrates points around the smallest-scale features of the path, which is generally not possible with automatic incrementation solely based on local convergence properties.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

Efficient allylation of cellulose in dimethyl sulfoxide/tetrabutylammonium fluoride trihydrate

The cellulose solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF) was successfully applied as reaction medium for the synthesis of allyl cellulose by conversion of the polymer with allyl chloride in the presence of solid NaOH. Samples with degree of substitution from 0.50 to 2.98 were accessible by varying the molar ratio anhydroglucose unit:allyl chloride:NaOH and reaction time. DMSO/TBAF was found to be an efficient reaction medium for the preparation of highly functionalized samples from spruce sulfite pulp with degree of polymerization of about 500 even in a scale of 50 g. The allyl cellulose samples were characterized by means of FTIR- and NMR spectroscopy. Size exclusion chromatography revealed negligible polymer degradation during synthesis and purification of the samples.     

Unfavorable mechanical effects of heat and moisture exchangers in ventilated patients

OBJECTIVE: To investigate the mechanical effects of artificial noses. SETTING: A general intensive care unit of a university hospital. PATIENTS: 10 patients in pressure support ventilation for acute respiratory failure. INTERVENTIONS: The following three conditions were randomly tested on each patient: the use of a heated humidifier (control condition), the use of a heat and moisture exchanger without filtering function (HME), and the use of a combined heat and moisture exchanger and mechanical filter (HMEF). The pressure support level was automatically adapted by means of a closed-loop control in order to obtain constancy, throughout the study, of patient inspiratory effort as evaluated from airway occlusion pressure at 0.1 s (P0.1). Patient's ventilatory pattern, P0.1, work of breathing, and blood gases were recorded. MEASUREMENTS AND MAIN RESULTS: The artificial noses increased different components of the inspiratory load: inspiratory resistance, ventilation requirements (due to increased dead space ventilation), and dynamic intrinsic positive end-expiratory pressure (PEEP). The additional load imposed by the artificial noses was entirely undertaken by the ventilator, being the closed-loop control of P0.1 effective to maintain constancy of patient inspiratory work by means of adequate increases in pressure support level. CONCLUSIONS: The artificial noses cause unfavorable mechanical effects by increasing inspiratory resistance, ventilation requirements, and dynamic intrinsic PEEP. Clinicians should consider these effects when setting mechanical ventilation and when assessing patients' ability to breathe spontaneously.     

Evidence for disturbed S-adenosylmethionine : S-adenosylhomocysteine ratio in patients with end-stage renal failure: a cause for disturbed methylation reactions?

BACKGROUND: Elevated homocysteine concentrations have been associated with premature arteriosclerosis and with impairment of key methylation reactions through accumulation of the homocysteine metabolite S-adenosylhomocysteine. In end-stage renal failure high homocysteine concentrations are commonly found but thus far the concentrations of related adenosylated metabolites in plasma have not been assessed. METHODS: In this prospective study we determined plasma homocysteine and related metabolites in 25 patients on regular haemodialysis, and in 40 healthy volunteers. Blood samples from patients were drawn immediately before and in 10 patients additionally after the dialysis session. RESULTS: Folic acid and vitamin B12 in plasma were similar in patients (mean +/- SEM 25+/-2 nmol/l and 400+/-41 pmol/l respectively) and controls (24+/-3 and 324+/-23 respectively). In patients plasma homocysteine, S-adenosylmethionine and S-adenosylhomocysteine were markedly elevated (36.6+/-3.6 micromol/l, 381+/-32nmol/l and 1074+/-55 nmol/l respectively) compared to the control values (6.8+/-0.4 micromol/l, 60+/-3 nmol/l and 24.4+/-1.1 nmol/l respectively) whereas the molar ratio of plasma S-adenosylmethionine and S-adenosylhomocysteine was significantly decreased (0.36+/-0.02 and 2.7+/-0.2 in patients and controls respectively). Haemodialysis failed to normalize the abnormal levels of these metabolites. CONCLUSION: Since the ratio of S-adenosylmethionine : S-adenosylhomocysteine is closely linked to the activity of numerous enzymatic methylation reactions, these results suggest that methylation may be impaired in these patients.     

The protease-protected 30 kDa domain of SecA is largely inaccessible to the membrane lipid phase

SecA binds to the inner membrane of Escherichia coli through low affinity lipid interactions or with high affinity at SecYEG, the integral domain of preprotein translocase. Upon addition of preprotein and nucleotide, a 30 kDa domain of SecYEG-bound SecA is protected from proteolysis via membrane insertion. Such protection could result from some combination of insertion into the lipid phase, into a proteinaceous environment or across the membrane. To assess the exposure of SecYEG-bound SecA to membrane lipids, a radiolabeled, photoactivatable and lipid-partitioning crosslinker, 3-trifluoromethyl-3-(m[125I]iodophenyl) diazirine benzoic acid ester, was incorporated into inner membrane vesicles. The 30 kDa domain of SecYEG-bound SecA, inserted into the membrane in response to translocation ligands, is 18-fold less labeled than SecY, which is labeled effectively. In contrast, incorporation of the purified 30 kDa SecA fragment into crosslinker-containing detergent micelles or addition of detergent to crosslinker-containing membranes bearing the protease-protected SecA domain readily allows for labeling of this domain. We propose that the protease-inaccessible 30 kDa SecA domain is shielded from the fatty acyl membrane phase by membrane-spanning SecYEG helices and/or is largely exposed to the periplasm.     

Generation of chromosome fragment specific bovine DNA sequences by microdissection and DOP-PCR

Trends in causative organisms and sources of infection were studied in a series of 288 episodes of bacteremia in neutropenic cancer patients observed in a single institution from 1986 to 1993. The incidence of bacteremia increased significantly from 20 episodes per 1000 admissions in 1986 to 50 episodes per 1000 admissions in 1993 (p = 0.00001). Over the study period, a continuous increment in gram-positive bacteremia, which reached 81% of episodes in 1993 (p = 0.000001), was observed. Conversely, the incidence of gram-negative bacteremia remained stable. Coagulase-negative staphylococci and viridans group streptococci were the most commonly isolated pathogens. Bacteremia caused by coagulase-negative staphylococci increased from 3 episodes per 1000 admissions to 19 episodes per 1000 admissions (p = 0.0001), and viridans group streptococci bacteremia increased from 0 episodes per 1000 admissions to 19 episodes per 1000 admissions (p = 0.000001). The upward trend in gram-positive bacteremia appeared to be related to a significant increase in both intravascular catheters (p = 0.003) and oral mucositis (p = 0.003) as sources of infection. Specific strategies to prevent chemotherapy-induced mucositis and catheter-related bacteremia merit further investigations.     

Hierarchical Self‐Assembly of Peptide‐Coated Carbon Nanotubes

Numerous applications, from molecular electronics to super‐strong composites, have been suggested for carbon nanotubes. Despite this promise, difficulty in assembling raw carbon nanotubes into functional structures is a deterrent for applications. In contrast, biological materials have evolved to self‐assemble, and the lessons of their self‐assembly can be applied to synthetic materials such as carbon nanotubes. Here we show that single‐walled carbon nanotubes, coated with a designed amphiphilic peptide, can be assembled into ordered hierarchical structures. This novel methodology offers a new route for controlling the physical properties of nanotube systems at all length scales from the nano‐ to the macroscale. Moreover, this technique is not limited to assembling carbon nanotubes, and could be modified to serve as a general procedure for controllably assembling other nanostructures into functional materials.