Quantification of the Phase Transformation Kinetics in High Chromium Cast Irons Using Dilatometry and Metallographic Techniques

Metallurgical and Materials Transactions A - Further development of high chromium cast irons (HCCI) is based on tailoring the microstructure, necessitating an accurate control over the phase...     

A stiffness parameter and truncation error criterion for adaptive path following in structural mechanics

We explore a truncation error criterion to steer adaptive step length refinement and coarsening in incremental-iterative path following procedures, applied to problems in large-deformation structural mechanics. Elaborating on ideas proposed by Bergan and collaborators in the 1970s, we first describe an easily computable scalar stiffness parameter whose sign and rate of change provide reliable information on the local behavior and complexity of the equilibrium path. We then derive a simple scaling law that adaptively adjusts the length of the next step based on the rate of change of the stiffness parameter at previous points on the path. We show that this scaling is equivalent to keeping a local truncation error constant in each step. We demonstrate with numerical examples that our adaptive method follows a path with a significantly reduced number of points compared to an analysis with uniform step length of the same fidelity level. A comparison with Abaqus illustrates that the truncation error criterion effectively concentrates points around the smallest-scale features of the path, which is generally not possible with automatic incrementation solely based on local convergence properties.     

A comparative study of direct and indirect evaluation of piezoelectric properties of electrophoreticaly deposited (Ba,Ca) (Zr,Ti)O3 lead-free piezoceramics

The development and optimisation of piezoceramics are targeted usually to enhance their piezoelectric properties evaluated by both the direct or indirect measurement methods. The presented work aims to elaborate on the correlation of one direct (Berlincourt) and two indirect (convert and field-dependent) piezoelectric measurement methods on various material states. The role of the ceramic powder treatment by ball milling and electrophoretic deposition (EPD) technique on the determined electric properties as well as basic physical and mechanical properties of (Ba_0.85Ca_0.15) (Zr_0.1Ti_0.9)O₃ ceramics (BCZT) was investigated. It was found that the EPD technologically supported by milling allows obtaining thick and dense deposits (>2 mm). After sintering, the BCZT ceramics with a relative density of >95%, hardness in the range of 2.3–2.9 GPa and piezoelectric coefficients of d₃₃* = 940 pm/V, d_33(E=0) = 427 pm/V and d₃₃ = 364 pC/N can be achieved. Reported results also suggest that indirect (field-dependent) and direct (Berlincourt) measurements of the piezoelectric coefficients can be comparable at optimal poling conditions.     

Liquid Phase CO2-Analytics for Standardized Mass Transfer Characterization in Packed Columns

Mass transfer parameters are necessary for the design of absorption and desorption processes in packed columns. To determine the effective interfacial area and liquid side mass transfer parameters, CO₂ absorption and desorption are frequently used. Reliable analytics for concentration determination are essential to obtain correct results. In this work two methods of CO₂ liquid phase analysis are compared: first, the back titration of unreacted NaOH after prior precipitation of the bound CO₂; secondly, the inorganic carbon analysis with a commercial inorganic carbon analyzer.     

Chemical Recycling of Carbon Fiber Reinforced Epoxy Composites Using Mild Conditions

The increased use of carbon fiber reinforced thermosets generates more waste and end-of-life products. However, an efficient recycling method for the expensive carbon fibers has not yet been developed. The selective decomposition of amine-cured epoxy resin under mild conditions is presented. A two-step method was investigated to decompose the epoxy resin. The optimum parameters were initially determined using a model compound. By analysis of the reaction products, a cleavage of the C–N bond according to the Cope elimination could be proven. Therefore, the Cope elimination is suggested as the main step of the decomposition of amine-cured epoxy resins in presence of hydrogen peroxide. By dissolving the resin, it is possible to recover resin-free fibers with unimpaired mechanical properties.     

Improved photon management in a photoelectrochemical cell with Nd-modified TiO2 thin film photoanode

Photon management involving particularly an up-conversion process is proposed as a relatively novel strategy for improving the efficiency of hydrogen generation in photoelectrochemical cells (PEC) with wide-band gap photoanodes. Optically active photoanode has been constructed by electrodeposition of titanium dioxide nanopowders containing Nd³⁺ ions, synthesized via a sol-gel method, onto ITO/TiO₂(thin film) substrates. Thin films of TiO₂ have been deposited by means of RF magnetron sputtering in an ultra-high-vacuum system. X-ray diffraction, scanning electron microscopy, UV-VIS-NIR spectrophotometry, and photoluminescence have been applied to assess the properties of photoanodes. In experiments involving photon-assisted water splitting, an external up-converter containing Yb³⁺/Er³⁺ rare-earth ions has been used. Photocurrent as a function of voltage (V_B) under illumination with white light is relatively high (280 μA at V_B = 0 V) for pure TiO₂ thin films and it is not affected by the electrodeposition of TiO₂:Nd³⁺ powders. NIR-driven up-conversion with laser excitation at λ = 980 nm has been found responsible for a 13-fold increase in photocurrent at V_B = 0 V in the modified PEC configuration.     

Distributed ledger technology in supply chains: a transaction cost perspective

With the emergence of distributed ledger technology (DLT), numerous practitioners and researchers have proclaimed its beneficial impact on supply chain transactions in the future. However, the vast majority of DLT initiatives are discontinued after a short period. With the full potential of DLT laying far down the road, especially managers in supply chain management (SCM) seek for short-term cost-saving effects of DLT in order to achieve long-term benefits of DLT in the future. However, the extant research has bypassed grounding long-term as well as short-term effects of DLT on supply chain transaction with empirical data. We address this shortcoming, following an abductive research approach and combining empirical data from a multiple case study design with the corresponding literature. Our study reveals that the effects of DLT on supply chain transactions are two-sided. We found six effects of DLT solutions that have a cost-reducing or cost avoidance impact on supply chain transactions. In addition, we found two effects that change the power distribution between buyers and suppliers in transactions and a single effect that reduces the dependency of supply chain transactions on third parties. While cost-reducing and avoidance as well as dependency-reducing effects are positive effects, the change in power distribution might come with disadvantages. With these findings, the paper provides the first empirical evidence of the impact of DLT on supply chain transactions, which will enable managers to improve their assessment of DLT usage in supply chains.     

Vanadium promoted Ni(Mg,Al)O hydrotalcite-derived catalysts for CO2 methanation

A series of V-promoted hydrotalcite-derived nickel catalysts (1.0, 2.0, and 4.0 wt%) were tested in CO₂ methanation. Ni–I–V2.0 with 2.0 wt% vanadium loading showed the highest catalytic activity, achieving 74.7% of CO₂ conversion and 100% of CH₄ selectivity at 300 °C. XRD and XANES analyses showed that the smallest Ni⁰ particles in Ni–I–V2.0 were consistent with the improved textural features observed for this catalyst. Moreover, CO₂-TPD revealed the highest sum of weak and medium basic sites in Ni–I–V2.0 that can positively influence catalytic behavior. For the studied catalysts, a clear correlation was demonstrated between the catalytic activity and specific surface area, as well as the basic properties.     

Predetermination of potential plastic hinges on reinforced concrete frames using GFRP reinforcement

In the past, glass fiber-reinforced polymer (GFRP)-reinforcement has been successfully applied in reinforced concrete (RC) structures where corrosion resistance, electromagnetic neutrality, or cuttability were required. Previous investigations suggest that the application of GFRP in RC structures could be advantageous in areas with seismic activity due to their high deformability and strength. However, especially the low modulus of elasticity of GFRP limited its wide application as GFRP-reinforced members usually exhibit considerably larger deformations under service loads than comparable steel-reinforced elements. To overcome the aforementioned issues, the combination of steel and GFRP reinforcement in hybrid RC sections has been investigated in the past. Based on this idea, this paper presents a novel concept for the predetermination of potential plastic hinges in RC frames using GFRP reinforcement. To analyze the efficiency of the concept, nonlinear finite element simulations were performed. The results underscore the high efficiency of hybrid steel-GFRP RC sections for predetermining potential plastic hinges on RC frames. The results also indicate that the overall seismic behavior of RC structures could be improved by means of GFRP as both the column base shear force during the seismic activity as well as the plastic deformations after the earthquake were considerably less pronounced than in the steel-reinforced reference structure.