Use of a subcutaneous glucose sensor to detect decreases in glucose concentration prior to observation in blood

The development of a hypoglycemic alarm system using a subcutaneous glucose sensor implies that a decrease in blood glucose is rapidly followed by a decrease in the signal generated by the sensor. In a first set of experiments the linearity and the kinetics of the response of sensors implanted in the subcutaneous tissue of normal rats were investigated during a progressive increase in plasma glucose concentration: the sensitivities determined between 5 and 10 mM and between 10 and 15 mM were not significantly different, and a 5-10 min delay in the sensor's response was observed. In a second set of experiments, performed in diabetic rats, the kinetics of the decrease in subcutaneous glucose concentration following insulin administration was monitored during a decrease in plasma glucose level, from 15 to 3 mmol/L. During the 20 first min following insulin administration, the sensor monitored glucose concentration in subcutaneous tissue with no lag time. Subsequently, the decrease in the estimation of subcutaneous glucose concentration preceded that of plasma glucose. This phenomenon was not observed when the same sensors were investigated in vitro during a similar decrease in glucose concentration and may be due to a mechanism occurring in vivo, such as the effect of insulin on glucose transfer from the interstitial space to the cells surrounding the sensor. It reinforces the interest of the use of implantable glucose sensors as a part of a hypoglycemic alarm.     

Several ways to produce porous carbon monoliths by template assisted routes

Several ways to produce microporous and mesoporous carbon monoliths by template assisted synthesis routes are described. Pressed zeolite (HY) and silica powder tablets have been used as templates. Sucrose acts as a carbon precursor and as a binder between the carbon particles as well. In the case of zeolite template, the carbon porosity could be increased by additional loading of the template with ethene. Due to the balance between mechanic stability and porosity of the carbon monolith, an optimal amount of sucrose is required. The final products were characterized by low temperature nitrogen adsorption.     

Superconductivity,magnetic properties,and specific heat of the pseudoternary,body-centered tetragonal system Ho(Rh1−x Ru x )4B4

The phase boundaries between superconductivity and various types of magnetism in the pseudoternary system Ho(Rh_1–x Ru _x )₄B₄ were examined by low-temperature measurements of the specific heatc(T), dc magnetizationM(H), superconducting upper critical fieldH _c2 (T), and ac susceptibility x_ac (T). For Ru concentrationsx0.37 superconductivity coexists with antiferromagnetic order below about 1 K, as shown by characteristic minima in theH _c2 (T) curves and an extrapolation ofM(H) data. Additionally, theH _c2 (T) measurements exhibit an unusual hysteresis between data taken in increasing and decreasing fields below 0.6 K. As a starting point for a theoretical explanation of this feature, a mean-field model is proposed with antiferromagnetic as well as ferromagnetic interactions, which are tentatively identified as the RKKY and dipole-dipole interactions. The existence of two competing interactions is supported by the observation of a time-dependence of the x_ac signal at 50 mK for 0.40x0.70, leading to a pronounced hysteresis in x_ac (T), which reflects a relaxation of the magnetic structure with time constants of several hours. Forx0.80 the x_ac (T) andM(H) data indicate ferromagnetic ordering withT _m increasing withx. However, an irregular temperature dependence of the Arrott plots forx=1.0 and unusual features of the magneticc(T) anomalies forx=0.95 and 1.0 exclude simple mean-field ferromagnetism. A discussion of the experimental results based on anx-dependent variation of the electronic density of states at the Fermi level is presented.     

Extended bisection method for parameter identification of the transient heat conduction equation for thermo-elastic deformations during drilling

A new interdisciplinary approach is discribed to identifying unknown parameters using an extended version of the known interval bisection method. This developed method is based on the use of finite elements for calibrating the simulation calculation. The resulting thermo-elastic deformations which occur in drilling processes with impaired cooling lubrication are to be used as correction values for tool positioning in the NC control. Based on the strong impact on workpiece temperature of machining, a simulation approach is presented for calculating the temperature fields and their thermo-elastic consequences. In addition, methods are presented to correct these effects. This paper particularly deals with the temperature fields of drilling operations. Special attention is paid to the technique employed for iterative numerical determination of the unknown heat flux η _w and heat transfer coefficient \(\bar {\gamma }\) values. Finally, the data obtained from experiments are compared with those achieved by numerical simulation in order to verify the efficiency of simulation and determination of parameters.     

A comparison of mixed integer programming formulations of the capacitated lot-sizing problem

We propose a novel mixed integer programming formulation for the capacitated lot-sizing problem with set-up times and set-up carryover. We compare our formulation to two earlier formulations, the Classical and Modified formulations, and a more recent formulation due to Suerie and Stadtler. Extensive computational experiments show that our formulation consistently outperforms the Classical and Modified formulations in terms of CPU time and solution quality. It is competitive with the Suerie–Stadtler (S&S) formulation, but outperforms all other formulations on the most challenging instances, those with low-capacity slack and a dense jobs matrix. We show that some of the differences in the performance of these various formulations arise from their different use of binary variables to represent production or set-up states. We also show that the LP relaxation of our Novel formulation provides a tighter lower bound than that of the Modified formulation. Our experiments demonstrate that, while the S&S formulation provides a much tighter LP bound, the Novel formulation is better able to exploit the intelligence of the CPLEX solution engine.     

Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking

Railway Engineering Science - A wheel tracking test was modelled to gain better understanding of the deflection and stress–strain distribution in an overlaid cracked pavements with and...     

Equine milk proteins: Chemistry,structure and nutritional significance

Equine milk has important nutritional and therapeutic properties that can benefit the diet of the elderly, convalescent or newborn. The protein content of equine milk is lower than that of bovine milk but similar to that of human milk. In this review qualitative and quantitative differences between the caseins and whey proteins of equine, bovine and human milk are discussed. Important biological and functional properties of specific proteins are reviewed and their significance in human nutrition considered. As well as characterizing equine milk proteins in the context of human nutrition and allergology, the potential industrial exploitation of equine milk is explored. Cross-reactivity of proteins from different species is discussed in relation to the treatment of cows’ milk protein allergy. While there is some scientific basis for the special nutritional and health-beneficial properties of equine milk based on its protein composition and similarity to human milk, further research is required to fully exploit its potential in human nutrition.     

Estimation and forecasting of machine health condition using ARMA/GARCH model

This paper proposes the hybrid model of autoregressive moving average (ARMA) and generalized autoregressive conditional heteroscedasticity (GARCH) to estimate and forecast the machine state based on vibration signal. The main idea in this study is to employ the linear ARMA model and the nonlinear GARCH model to explain the wear and fault condition of machine, respectively. The successful outcomes of the ARMA/GARCH prediction model can give obvious explanation for future states of machine, which enhance the worth of machine condition monitoring as well as condition-based maintenance in practical applications. The advance of the proposed model is verified in empirical results as applying for a real system of a methane compressor in a petrochemical plant.