Convolutional neural network with joint stepwise character/word modeling based system for scene text recognition

Multimedia Tools and Applications - Text recognition in the wild is a challenging task in the field of computer vision and machine learning. Existing optical character recognition engines cannot...     

Study of planar structure applying reciprocity technique combined with MGEC and analysis of discontinuity

The 3D structure electromagnetic computation presents several difficulties related to the volume mesh. In fact, the entire volume space must be taken into account even the smallest details. In this article, we propose a formulation based on the reciprocity theorem combined with the generalized equivalent circuit method to model a planar 3D structure with both coaxial and planar excitation. The major advantage of this formulation is the fact to reduce the computational volume into 2D ones in the discontinuity plane. In addition, we focused on the calculation of the discontinuity between the excitation source and the planar structure to determine the exact behavior of the electric coaxial excitation model. The obtained current density, electric field distributions, and the input impedance are presented and discussed in the following sections. An approximately good agreement of input impedance with those obtained by the simulator and measurement is shown.     

Design of a retention tank: comparison of stormwater quality models with various levels of complexity.

Stormwater quality simulation models are useful tools for the design and management of sewer systems. Modelling results are highly sensitive to experimental data used for calibration. This sensitivity is examined for three modelling approaches of various complexities (site mean concentration approach, event mean concentration approach and build-up, washoff and transport modelling approach) applied to a typical case study (design of a dry detention tank), accounting for the variability of calibration data and their effect on simulation results. Calibrated models with different calibration data sets were used to simulate 3 years of rainfall with different retention tank specific volumes. Annual pollutant load interception efficiencies were determined. Simulations results revealed (i) that there is no advantage in using the EMC model compared to the SMC model and (ii) that the BWT model resulted in higher design ratios than those given by the SMC/hydraulic approach. For both EMC and BWT models, using an increasing number n of events for calibration leads to narrower confidence intervals for the design ratios. It is crucial for design ratios to account for successive storm events in chronological order and to account for the maximum allowable flow to be transferred to the downstream WWTP.     

On the linear correlation between microhardness and mechanical properties in polar polymers and blends

The tensile elastic modulus (E), yield stress (σ_Y) and microhardness (MH) of neat and binary and ternary blends of glassy semicrystalline ethylene–vinyl alcohol copolymer (EVOH), a glassy amorphous polyamide and a semicrystalline nylon‐containing ionomer covering a broad range of properties were examined. The tests were carried out on dry and water‐equilibrated samples to produce stiffer and softer materials, respectively. From the results, more accurate linear correlations were found to describe adequately the microhardness, modulus and yield stress of these strongly self‐associated polymers through hydrogen bonding. Copyright © 2003 Society of Chemical Industry     

Cadaver lungs for transplantation. Effect of ventilation with alveolar gas

In an effort to increase the donor pool for lung transplantation (LTX), we have demonstrated the feasibility of LTX from circulation-arrested cadavers in a canine LTX model. We hypothesized that ventilation of the cadaver lung with alveolar gas (20% O2, 5% CO2, balance N2) (AG) would be superior to ventilation with 100% oxygen (O2) after circulatory arrest of the donor. Twelve mongrel dogs were intubated, heparinized and euthanized by pentothal injection and ventilated with AG (n=6) or O2 (n=6). Four hours later, donor animals underwent sternotomy, and the lungs were flushed with cold modified Euro-Collins solution, harvested, and stored inflated in ice slush. Left lung allotransplantation was performed, and recipients were made dependent o n the transplanted lung by occlusion of the contralateral bronchus and pulmonary artery. Recipient animals were ventilated with an FiO2 of 0.4 and followed for 8 hr. Total ischemic time was 7.9 hr for both groups. Pulmonary edema developed in all recipients of AG lungs; one recipient survived the 8-hr observation period with poor oxygenation. In contrast, three of six recipients of O2-ventilated lungs survived for 8-hr with excellent gas exchange. Specimens of donor lungs before and after transplant were evaluated histologically utilizing trypan blue exclusion as an indicator of cell viability. At the time of organ retrieval 4 hr after death, 6% of cells were nonviable in the O2-ventilated cadaver lungs. Circulation-arrested cadaver lungs ventilated with 100% O2 prior to organ retrieval have superior pulmonary function after transplant compared with lungs ventilated with AG. Ventilation of cadaver lungs with AG induces pulmonary injury in this model. retrieval of donor lungs from circulation-arrested cadavers has potential for increasing the pulmonary donor pool.     

Cardiac tamponade as a presentation of primary hypothyroidism in a young woman

Pericardial effusion (PE) as a hypothyroidism associated sign, is something that can be found with relative frequency; nevertheless, cardiac tamponade (CT) as the first sign of this disease may be considered exceptional especially in young patients. We report a 31 years old woman with clinical symptoms and signs of CT that in the forward workshop was diagnosed of primary hypothyroidism as cause of the CT. We shortly describe the case and review the literature, emphasizing the importance of the knowledge of CT trigger factors in myxedematous PE, as well as its usual benign evolution with hormonal treatment, without recurrences of the CT after pericardiocentesis is performed. This justify a conservative approach, in spite of the slow resolution of the PE what can take as long as 1.5 years.     

Clinical chemistry of common apolipoprotein E isoforms

Apolipoprotein E plays a central role in clearance of lipoprotein remnants by serving as a ligand for low-density lipoprotein and apolipoprotein E receptors. Three common alleles (apolipoprotein E(2), E(3) and E(4)) give rise to six phenotypes. Apolipoprotein E(3) is the ancestral form. Common apolipoprotein E isoforms derive from nucleotide substitutions in codons 112 and 158. Resulting cysteine-arginine substitutions cause differences in: affinities for low-density lipoprotein and apolipoprotein E receptors, low-density lipoprotein receptor activities, distribution of apolipoprotein E among lipoproteins, low-density lipoprotein formation rate, and cholesterol absorption. Accompanying changes in triglycerides, cholesterol and low-density lipoprotein may promote atherosclerosis development. Over 90% of patients with familial dysbetalipoproteinaemia have apolipoprotein E(2)/E(2). Apolipoprotein E(4) may promote atherosclerosis by its low-density lipoprotein raising effect. Establishment of apolipoprotein E isoforms may be important for patients with diabetes mellitus and several non-atherosclerotic diseases. Apolipoprotein E phenotyping exploits differences in isoelectric points. Isoelectric focusing uses gels that contain pH 4-7 ampholytes and urea. Serum is directly applied, or prepurified by delipidation, lipoprotein precipitation or dialysation. Isoelectric focusing is followed by immunofixation/protein staining. Another approach is electro- or diffusion blotting, followed by protein staining or immunological detection with anti-apolipoprotein E antibodies and an enzyme-conjugated second antibody. Apolipoprotein E genotyping demonstrates underlying point mutations. Analyses of polymerase chain reaction products are done by allele-specific oligonucleotide probes, restriction fragment length polymorphism, single-stranded conformational polymorphism, the primer-guided nucleotide incorporation assay, or denaturating gradient gel electrophoresis. Detection with primers that either or not initiate amplification is performed with the amplification refractory mutation system. Disparities between phenotyping and genotyping may derive from isoelectric focusing methods that do not adequately separate apolipoprotein E posttranslational variants, storage artifacts or faint isoelectric focusing bands.     

Live animal performance, carcass traits, and meat palatability of calf- and yearling-fed cloned steers

Two groups of Brangus steers produced by nuclear transplantation cloning were used in parallel studies investigating the impact of calf- and yearling-feeding. The first group (n = 8) were fed as calves (CF; n = 4) or yearlings (YF; n = 4) to a constant age end point of 16 mo. The second group (n = 10) were fed as calves (CF; n = 5) or yearlings (YF; n = 5) to a constant live weight end point (530 kg). When slaughtered at the same age, CF and YF steers did not differ (P > .05) in feedlot ADG, but the CF steers were heavier and had higher dressing percentages, numeric yield grades, and quality grades (P < .05). Top loin steaks from the groups of steers did not differ (P > .05) in palatability traits. When fed to a constant live weight, the YF steers gained more rapidly (P < .05) and had lower (P < .05) numeric yield grades than did CF steers. Again CF steers had higher (P < .05) dressing percentages. There was no difference (P > .05) between the treatments in carcass quality grade or meat palatability characteristics. Thus, when finished to a constant weight end point, YF steers gained more rapidly, with no adverse effects on carcass quality grade or palatability traits; however, CF steers consistently produced higher dressing percentages, largely due to greater external fatness.     

Effects of clozapine and haloperidol on baseline levels of vacuous jaw movements in aged rats

BACKGROUND: IgE-mediated hypersensitivity to latex proteins has become a significant clinical problem over the last decade. Nursing and medical staff are at risk because of their occupational exposure to latex. AIMS: To determine the prevalence of type I hypersensitivity to latex allergens in the nursing staff of an Australian hospital. METHODS: A questionnaire which asked about symptoms associated with the use of latex gloves was completed by 140 nurses working in the Alfred Hospital (72 in general medical wards, 68 in intensive care units). Skin prick tests with eluates of five different types of latex glove as well as common aeroallergens (rye pollen and house dust mite) and banana extract were performed. RESULTS: Thirty-one nurses (22%) were skin prick test positive to at least one of the five latex glove eluates. All of these nurses were atopic, having positive skin prick tests to rye pollen or house dust mite. Symptoms of local dryness, itch and erythema associated with glove use were reported by more than half the study group, but not more frequently by those who were skin prick test positive to latex. Urticaria associated with glove use was reported more frequently by those with positive latex skin prick tests (13% vs 4%, p = 0.05). Eighty-seven per cent of the nurses who were latex skin test positive were also positive to banana extract. CONCLUSIONS: IgE-mediated hypersensitivity to latex is common in nurses working in an Australian hospital. Glove associated symptoms were frequently reported, but in most cases the symptoms were more typical of irritant or contact dermatitis rather than type I hypersensitivity reactions. However, the extent of subclinical sensitisation to latex found in this study suggests that symptomatic latex allergy is likely to emerge as an increasing problem for nursing staff in this country.