排序方式: 共有10条查询结果,搜索用时 99 毫秒
1
1.
2.
用电导法对十二烷基硫酸钠(SDS)的临界胶团浓度(CMC)进行了研究,考虑了温度、pH值、金属离子(Cd2+、Zn2+、Pb2+)浓度变化以及SDS和3种非离子表面活性剂(Brij35、TritonX-100、APG)的复配对溶液CMC值的影响。结果表明,随温度升高,pH值上升,金属离子浓度增加以及Brij35/SDS、TritonX-100/SDS、APG/SDS混合体系配比的增加,溶液CMC值减小。特别当复配比在0.13~1时,CMC值的下降趋势非常明显。这一结果为采用胶团强化超滤技术处理电解锌废水时SDS最佳添加量的确定提供了有效的依据。 相似文献
3.
采用胶团强化超滤(MEUF)-泡沫分离(FF)组合工艺,对含镉重金属废水进行深度处理.探讨了两种技术联用对分离效果的影响.结果表明,表面活性剂SDS和金属Cd2 离子浓度对分离效果有很大的影响.MEUF-FF联用后,大大降低了表面活性剂SDS用量,节省了经济成本.相比于单一的MEUF,MEUF-FF联用后能降低出水中SDS浓度,显著提高Cd2 分离效率.经过组合工艺处理后,Cd2 出水的浓度小于0.1mg/L,满足国家污水综合排放标准(GB8978-1996). 相似文献
4.
5.
6.
7.
8.
9.
开展了吸液材料的吸排液综合性能、导电性能、耐热性能及操作性能等材料性能试验,并对垫式柔性电解去污的电解参数进行了研究,通过电流密度和极间距,研究两者变化对电解参数的影响。结果表明:吸水纤维类是最适于垫式柔性电解去污的吸液材料;电流密度和极间距的变化,对金属腐蚀速率、电解液利用率、连续电解维持时间、电解起始电压等均有不同程度的影响。与吸液材料相匹配的电解参数建议为:电流密度不大于0.3 A/cm2,极间距不大于4 mm。 相似文献
10.
To sepantte zinc ions from aqueous solution efficiently, micellar-enhanced ultrafiltration(MEUF) of hollow ultrafiltration membrane was used with sodium dodecyl sulfate(SDS) as surfactant.The formation of micellar and the adsorption mechanism were investigated including the influence office ratio of SDS to zinc ions on the micelle quantity, the micelle ratio, the gross adsorptive capacity, the rejection of zinc ions and the adsorption isotherm law. The results show that the rejection rate of zinc ions reaches 97% and the adsorption of zinc ions on SDS conforms to the Langmuir adsorption isotherm and the adsorption is a chemical adsorption process. 相似文献
1