Thermal analysis of EAST neutral beam injectors for long-pulse beam operation

Two sets of neutral beam injectors(NBI-1 and NBI-2) have been mounted on the EAST tokamak since 2014. NBI-1 and NBI-2 are co-direction and counter-direction, respectively. As with indepth physics and engineering study of EAST, the ability of long pulse beam injection should be required in the NBI system. For NBIs, the most important and difficult thing that should be overcome is heat removal capacity of heat loaded components for long-pulse beam extraction. In this article, the thermal state of the components of EAST NBI is investigated using water flow calorimetry and thermocouple temperatures. Results show that(1) operation parameters have an obvious influence on the heat deposited on the inner components of the beamline,(2) a suitable operation parameter can decrease the heat loading effectively and obtain longer beam pulse length, and(3) under the cooling water pressure of 0.25 MPa, the predicted maximum beam pulse length will be up to 260 s with 50 keV beam energy by a duty factor of 0.5. The results present that, in this regard, the EAST NBI-1 system has the ability of long-pulse beam injection.     

射频负离子源关键参数测量系统研制

强流离子源是大功率中性束注入系统的关键部件之一,为了实现中性束注入系统的稳态运行,需要开展射频负离子源的实验研究。射频负离子源的负离子引出电流、引出总电流和引出电子流等关键参数的测量是射频离子源实验理论分析的基础,本系统通过信号调理隔离传输实现射频负离子源关键参数的测量。实验结果表明,系统测量采集数据精准可靠,运行稳定。     

EAST-NBI抑制极电源IGBT串联技术的研究

中性束注入器(Neutral Beam Injector,NBI)是东方超环(Experimental Advanced Superconducting Tokamak,EAST)核聚变实验装置辅助加热的重要组成部分。目前NBI离子源引出系统采用四电极结构,即加速电极、梯度电极、抑制电极和地电极。抑制极电源是为其中的抑制电极提供负电位的高压直流电源。根据抑制极电源输出特性的要求,输出端采用串联绝缘栅双极型晶体管(Insulated Gate Bipolar Transistor,IGBT)作为调制开关。为研究IGBT串联技术对均压效果和抑制极电源输出特性的影响,采用PSpice软件对IGBT开关进行了建模,并进行了不同电路参数下的仿真。仿真表明:一定条件下,电阻电容二极管(Resistance Capacitance Diode,RCD)缓冲电路中电容参数对动态均压效果和电源关断特性具有决定性影响,缓冲电阻影响电容的放电时间及放电电流峰值。最后给出了相应的实验测试结果。该研究结果可以明确缓冲电路参数与均压效果以及抑制极电源开关特性之间的定量关系,为抑制极电源开关特性的进一步优化及其与加速极电源的特性匹配提供数据指导,对于NBI离子源的安全稳定运行具有重要意义。     

The development of data acquisition and control system for extraction power supply of prototype RF ion source

A 16 kV/20 A power supply was developed for the extraction grid of prototype radio frequency (RF) ion source of neutral beam injector.To acquire the state signals of extraction grid power supply (EGPS) and control the operation of the EGPS,a data acquisition and control system has been developed.This system mainly consists of interlock protection circuit board,photoelectric conversion circuit,optical fibers,industrial compact peripheral component interconnect (CPCI) computer and host computer.The human machine interface of host computer delivers commands and data to program of the CPCI computer,as well as offers a convenient client for setting parameters and displaying EGPS status.The CPCI computer acquires the status of the power supply.The system can turn-off the EGPS quickly when the faults of EGPS occur.The system has been applied to the EGPS of prototype RF ion source.Test results show that the data acquisition and control system for the EGPS can meet the requirements of the operation of prototype RF ion source.     

R&D progress of high power ion source on EAST-NBI

The neutral beam injector(NBI) system was designed and developed mainly for the plasma heating on the Experimental Advanced Superconducting Tokamak(EAST). The high power ion source is the key part of the NBI. A hot cathode ion source was used on the EAST-NBI. The ion source was conditioned on the ion source test bed with hydrogen gas and achieved the designed parameters. The deuterium gas was used when it moved to the EAST-NBI. The main performance of the ion source on EAST is presented in this paper. The highest beam power of 4.5 MW in NBI-1 and 2.75 MW in NBI-2 was achieved. The total neutral beam power is about 4.5 MW. The long pulse beam of 100 s is injected into the EAST plasma too.     

Analysis of the characteristics of the plasma of an RF driven ion source for a neutral beam injector

A radio frequency(RF)driven ion source is a very important component of a neutral beam injector for large magnetic confinement fusion devices.In order to study the key technology and physics of an RF driven ion source for a neutral beam injector in China,an RF ion source test facility was developed at the Institute of Plasma Physics,Chinese Academy of Sciences.In this paper,a two-dimensional fluid model is used to simulate the fundamental physical characteristics of RF plasma discharge.Simulation results show the relationship of the characteristics of plasma(such as electron density and electron temperature)and RF power and gas pressure.In order to verify the effectiveness of the model,the characteristics of the plasma are investigated using a Langmuir probe.In this paper,experimental and simulation results are presented,and the possible reasons for the discrepancies between them are given.This paper can help us understand the characteristics of RF plasma discharge,and give a basis for further R&D for an RF ion source.     

基于CSS的NBI射频离子源控制程序设计

离子源是中性束注入器(Neutral Beam Injector,NBI)的关键子系统之一,根据射频离子源的实验和运行需求,本文设计了一套基于物理实验与工业控制系统(Experimental Physics and Industrial Control System,EPICS)架构的控制程序,实现对射频离子源实验和调试过程的远程监控功能。NBI射频离子源控制程序通过集成开发平台(Control System Studio,CSS)的交互界面开发模块(Best OPI Yet,BOY)实现友好的人机交互界面,使用Jython实现界面逻辑,支持服务器/客户端和EPICS两种通信架构。程序已经上线近半年,实验表明,射频离子源控制程序具备了放电模式设置、时序幅值设置、设备状态实时监控、采集数据实时波形显示等功能,满足了射频离子源实验的远程控制和数据可视化的需求。     

双潘宁离子源等离子体发生器电源系统

针对强流双潘宁离子源等离子体发生器电源系统的特殊要求,介绍了灯丝电源和弧电源的组成及其作用,并对其主电路设计思路进行了相关的分析。离子源等离子体放电实验结果表明,该套等离子体电源系统达到了设计指标要求。     

An analysis and preliminary experiment of the discharge characteristics of RF ion source with electromagnetic shielding

Combined with two-dimensional(2D) and three-dimensional(3D) finite element analysis and preliminary experimental tests, the effects of size and placement of the electromagnetic shield of the radio-frequency(RF) ion source with two drivers on plasma parameters and RF power transfer efficiency are analyzed. It is found that the same input direction of the current is better for the RF ion source with multiple drivers. The electromagnetic shield(EMS) should be placed symmetrically around the drivers...     

Hefei utility negative ions test equipment with RF source: commissioning and first results

In order to study the key technology and physics of RF driven negative ion source for neutral beam injector in China, the Hefei utility negative ions test equipment with RF source was developed at Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP). Its negative ion source can be equipped with single or double RF drivers. There is a plasma expansion chamber with depth of 19 mm and an enhanced filter field. A three electrodes negative ion accelerator was employed to extract and accelerate the negative ions, which are plasma grid, extraction grid and ground grid. And there are several diagnostic tools for the plasma and beam parameters measurement. The characteristics of plasma generation, negative ion production and extraction were studied on the test equipment. The negative ion beam was extracted from the RF driven negative ion source for the first time. The detailed structure and main results are presented in this article.