Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

The mechanical property and phase structures of wheat proteins/polyvinyl alcohol blends studied by high-resolution solid-state NMR

The phase structures of thermally processed wheat proteins (WP) and polyvinyl alcohol (PVOH) blends were studied by solid-state high-resolution NMR spectroscopy. The intermolecular interactions among the multi-component systems and the behavior of each component in the blends on scales of nanometers were examined. The mechanical properties of the blends were also measured and related to the phase structure studies. The results indicated that the polymer chains of WP could be homogeneously mobilized when thermally processed with glycerol and water as plasticisers, but the glycerol predominately associated with WP rather than PVOH in the blends. The intermolecular hydrogen bonding interactions between WP and PVOH caused some extent of miscibility in the system on scales of nanometers especially when the PVOH content was low. The tensile strength and modulus of the blends were improved as compared to WP. However, the intermolecular interactions were relatively weak and could not be further enhanced by increasing PVOH component in the blends. The particle miscible WP/PVOH blends contained plasticised WP and PVOH phases in conjunction with the miscible WP/PVOH phase. Increasing the PVOH content in the blends did not result in an increase of the percentage of the miscible phase and the blends tented to be immiscible while the elongation of the blends was reduced when increasing the PVOH content in the blends.     

A comprehensive study on RF MEMS switch

This paper emphasis on state-of-the-art of the earlier until the current trend and demand, principles, design considerations, key performance and fabrication technology of RF MEMS switch devices developed over the past few years. RF MEMS switch performance and features such as actuation voltage, insertion loss, isolation and ease with cost of fabrication and applications are compared and discussed.     

Fatal gastrointestinal haemorrhage due to coexisting primary aorto-enteric and aorto-colic fistulae. Complicating untreated atheromatous abdominal aortic aneurysm

We report a case of aorto-enteric and aorto-colonic fistulae in a 73 year old man with no previous abdominal surgery which resulted in massive gastrointestinal haemorrhage and death and was undiagnosed despite several hospital admissions and endoscopic examinations. This case serves to highlight an extremely rare but fatal condition, which is potentially treatable, if an early diagnosis is made.     

Physico-chemical properties of various palm-based diacylglycerol oils in comparison with their corresponding palm-based oils

Palm-based diacylglycerol (P-DAG) oils were produced through enzymatic glycerolysis of palm kernel oil (PKO), palm oil (PO), palm olein (POL), palm mid fraction (PMF) and palm stearin (PS). High purity DAG (83–90%, w/w) was obtained and compared to palm-based oils (P-oil) had significantly (P < 0.05) different fatty acid composition (FAC), iodine value (IV) and slip melting point (SMP). Solid fat content (SFC) profiles of P-DAG oils as compared to P-oils had less steep curves with lower SFC at low temperature range (5–10 °C) and the higher complete melting temperatures. Also, P-DAG oils in contrast with P-oils showed endothermic as well as exothermic peaks with higher transition temperatures and significantly (P < 0.05) higher crystallisation onsets, heats of fusion, and heats of crystallisation. Crystal forms for P-DAG oils were mostly in the β form.     

Investigation of the Microstructural,Mechanical and Corrosion Properties of Grade A Ship Steel-Duplex Stainless Steel Composites Produced <Emphasis Type="Italic">via</Emphasis> Explosive Welding

Grade A ship-building steel-AISI 2304 duplex stainless steel composite plates were manufactured via explosive welding. The AISI 2304 plates were used to clad the Grade A plates. Optical microscopy studies were conducted on the joining interface for characterization of the manufactured composite plates. Notch impact, tensile-shear, microhardness, bending and twisting tests were carried out to determine the mechanical properties of the composites. In addition, the surfaces of fractured samples were examined by scanning electron microscopy (SEM), and neutral salt spray (NSS) and potentiodynamic polarization tests were performed to examine corrosion behavior. Near the explosion zone, the interface was completely flat, but became wavy as the distance from the explosion zone increased. The notch impact tests indicated that the impact strength of the composites decreased with increasing distance from the explosion zone. The SEM studies detected brittle behavior below the impact transition temperature and ductile behavior above this temperature. Microhardness tests revealed that the hardness values increased with increasing distance from the explosion zone and mechanical tests showed that no visible cracking or separation had occurred on the joining interface. The NSS and potentiodynamic polarization tests determined that the AISI 2304 exhibited higher corrosion resistance than the Grade A steel.