An Efficient Modified Dragonfly Optimization Based MIMO-OFDM for Enhancing QoS in Wireless Multimedia Communication

Wireless Personal Communications - Multiple inputs multiple outputs (MIMO) is a reliable technique which can manage the increased wireless data traffic in the future generation of wireless...     

High slew-rate CMOS operational amplifier

A 0.8 /spl mu/m CMOS operational amplifier configuration with a slew rate in excess of 2 V/ns and a unity gain bandwidth of 55 MHz with a load capacitance of 15 pF is proposed. This employs a dynamic technique that turns on a large current source when the rate of change of input is larger than a pre-decided value.     

Control of polishing of diamond films using microactuation and an atmospheric pressure plasma

In this work, the diamond deposited by hot filament chemical vapor deposition (CVD) is polished using an atmospheric pressure plasma. In order to position the film relative to the plasma, a microactuator system is designed using a stack of domed piezoelectric actuators. A dynamic model based on the physical system is developed and the model parameters are measured experimentally. A system based on laser triangulation is used to measure the position of the diamond film relative to the plasma. Control techniques are used to reduce the oscillations during actuation and to eliminate the steady state positioning error. With the application of feedback control, the overshoot is reduced to 2% and the settling time is reduced to 0.3 s. A preliminary set of experiments is performed to relate process parameters to the final surface roughness of the diamond film. The parameters studied include the film's time of exposure to the plasma, the height of the film relative to the plasma, and the distance from the film to the center of the plasma. It is found that the optimum exposure time is 15 min and the reduction of surface roughness is greatest when the distance between the film and the plasma is at a minimum. The best results are obtained when the top of the film is even in elevation with the tip of the top electrode. The diamond film is translated laterally along the plasma. When feedback control is not used, there is no change in the surface roughness. With feedback control implemented, the surface roughness of the diamond film is reduced by 33%.     

A DNA-binding element for a steroid receptor-binding factor is flanked by dual nuclear matrix DNA attachment sites in the c-myc gene promoter

The receptor-binding factor (RBF) for the avian oviduct progesterone (Pg) receptor (PR) has previously been shown to be a unique 10-kDa nuclear matrix protein that generates high affinity PR-binding sites on avian DNA. This paper describes the use of Southwestern blot and DNA gel shift analyses with RBF protein to identify a minimal 54-base pair RBF-binding element in the matrix-associated region (MAR) of the Pg-regulated c-myc gene promoter. This element contains a 5'-GC-rich domain and a 3'-AT-rich domain, the latter of which has a homopurine/homopyrimidine structure. The gel shift assays required the generation of an RBF-maltose fusion protein (RBF-MBP), which specifically binds this element and is supershifted when the anti-RBF polyclonal antibody is added. Computer analysis of the full-length amino acid sequence for RBF predicts a DNA-binding motif involving a beta-sheet structure at the N-terminal domain. Southern blot analyses using nuclear matrix DNA suggests that there are dual MAR sites in the c-myc promoter, which flank an intervening domain containing the RBF element. The co-transfection of this MAR sequence, containing the RBF element and cloned into a luciferase reporter vector, together with an RBF expression vector construct, into steroid treated human MCF-7 cells, results in a decrease of the c-myc promoter activity relative to control transfections containing only the parent vector of the RBF expression construct. These data suggest that a unique chromatin/nuclear matrix structure, composed of the RBF-DNA element complex which is flanked by nuclear matrix attachment sites, serves to bind the PR and repress the c-myc promoter.     

Neuroanatomy in Rett syndrome: cerebral cortex and posterior fossa

Rett syndrome (RS), a neurodevelopmental disorder of unknown etiology occurring almost exclusively in females, is characterized by autistic-like behavior, motor dysfunction, loss of language skills, dementia, and microcephaly. This study is a follow-up and extension of a previously reported neuroimaging study of patients with RS. We replicated previously reported findings with a larger patient population, and the volumetric MRI analysis was extended to include an analysis of neuroanatomy of the posterior fossa. Twenty girls with RS were compared with individually age- and gender-matched normal controls. Patients with RS showed global reduction in gray- and white-matter volumes. The prefrontal, posterior-frontal, and anterior-temporal regions showed the largest bilateral decrease in gray-matter volume, whereas white-matter volume was uniformly reduced throughout the brain. We found confirmation for the preferential reduction in caudate nucleus volume. However, we observed no preferential reduction in midbrain volume despite a preferential reduction in the midsagittal area of this region. We also present an individual case comparison between monozygotic twins discordant for RS.     

Comprehensive performance modeling and analysis of multicasting in optical networks

Multicasting is becoming increasingly important in today's networks. In optical networks, optical splitters facilitate the multicasting of optical signals. By eliminating the transmission of redundant traffic over certain links, multicasting can improve network performance. However, in a wavelength-division multiplexed (WDM) optical network, the lack of wavelength conversion necessitates the establishment of a single multicast circuit (light-tree) on a single wavelength. On the other hand, establishing several unicast connections (lightpaths) to satisfy a multicast request, while requiring more capacity, is less constrained in terms of wavelength assignment. The objective of the paper is to evaluate the tradeoff between capacity and wavelength continuity in the context of optical multicasting. To this end, we develop accurate analytical models with moderate complexity for computing the blocking probability of multicast requests realized using light-trees, lightpaths, and combinations of light-trees and lightpaths. Numerical results indicate that a suitable combination of light-trees and lightpaths performs best when no wavelength conversion is present.     

Finite-element simulation of induction heat treatment

An efficient finite-element procedure has been developed for the analysis of induction heat treatment problems involving nonisothermal phase changes. The finite-element procedure first simulates the magnetic field developed when currents flow through an induction coil by solving Maxwell’s electromagnetic field equations; at the following step, it calculates the temperature distribution in the workpiece due to eddy currents induced by the magnetic field. The final stage of the simulation involves the determination of the distributions of residual stress, hardness, and microstructure in the workpiece. The finite-element analysis includes temperature-dependent material properties, changes in permeability of the workpiece at the Curie temperature, a mixed hardening rule to describe the material constitutive model, and the incorporation of time-temperature-transformation (TTT) diagram. The procedure was applied to the simulation of the induction hardening of 1080 steel bar. Firstly, the magnetic field and temperatures developed in the workpiece during (a) the induction heating of an infinitely long 1080 steel cylinder by a single encircling coil and (b) the induction heating of a semi-infinite half-space by a single coil suspended above it were calculated using the finite-element procedures. These were validated by comparing them with analytical solutions derived for these configurations using a Green’s function method. Finally, to demonstrate the predictive capability and practical applicability of the current finite-element procedure, two examples pertaining to the induction heat treatment of an infinite 1080 steel bar of square cross section and a notched finite 1080 steel cylinder of circular cross section were analyzed to predict the magnetic field, temperature, and residual stress distributions. The current finite-element procedure could be used as a powerful design tool for linking induction heat treating parameters with the mechanical property attributes of the heat treated component.     

Finite-element simulation of moving induction heat treatment

An efficient finite-element procedure with a remesh scheme has been developed for the analysis of the moving induction heat treatment process, wherein relative motion occurs between the coil and the workpiece. In this procedure, the magnetic field is first simulated by using an updated mesh that tracks the moving coil position; the moving heat source within the workpiece material is derived from the magnetic field. The heat equation is then solved to obtain the temperature field created by the heat source. The procedure has been applied to calculate the temperature distributions in 1080 carbon steel cylinders during induction heating. The calculations have been validated by comparison with analytical solutions for the temperature distribution obtained using Green’s function methods. Finally, the temperature, residual stress, and microstructure distributions in quenched 1080 steel cylinders have been obtained using the finite-element procedure. Quenching of the heated cylinders, by both a moving cooling ring and a stationary liquid bath, has been analyzed. The finite-element procedure presented incorporates temperature-dependent material properties, phase transformations occurring in the 1080 steel, the change in magnetic permeability of the 1080 steel at the Curie temperature, and an elastoplastic stress model based on a mixed hardening rule. The simulation results demonstrate that the finite-element procedure could be applied to a variety of moving induction heat treatment problems to determine the residual stress and microstructure distributions in the heat-treated component. It also could be used in the design of process parameters and coils.     

Model-based test generation using extended symbolic grammars

A novel, model-based test case generation approach for validating reactive systems, especially those supporting richly structured data inputs and/or interactions, is presented. Given an executable system model and an extended symbolic grammar specifying plausible system inputs, the approach performs a model-based simulation to (i) ensure the consistency of the model with respect to the specified inputs, and (ii) generate corresponding test cases for validating the system. The model-based simulation produces a state transition diagram (STD) automatically justifying the model runtime behaviors within the test case coverage. The STD can further be transformed to produce an evolved symbolic grammar, which can then be used to incrementally generate a refined set of test cases. As a case study, we present a live sequence chart (LSC) model-based test generator, named LCT in short, for LSC simulation and consistency testing. The evolved symbolic grammar produced by the simulator can either be used to generate practical test cases for software testing, or be further refined by applying our model-based test generation approach again with additional test coverage criteria. We further show that LSCs can also be used to specify and test certain temporal system properties during the model simulation. Their satisfaction, reflected in the STD, can either be served as a directive for selective test generation, or a basis for further temporal property model checking.