An Efficient Modified Dragonfly Optimization Based MIMO-OFDM for Enhancing QoS in Wireless Multimedia Communication

Wireless Personal Communications - Multiple inputs multiple outputs (MIMO) is a reliable technique which can manage the increased wireless data traffic in the future generation of wireless...     

Kalman filtering with constrained output injection

In applications involving large scale systems such as discretized partial differential equations, it is often of interest to use data to estimate state variables associated with a subregion of the spatial domain. In this paper we derive an extension of the classical Kalman filter in which data injection is confined to a subspace of the system states.     

Thermal stability of natural fibers and their polymer composites

Natural fiber-based composites are applied in many structural engineered products from civil constructions to automobile manufacturing due to the properties such as low density, high aspect ratio, biodegradability and ease to work. During the past decades such composites have been thoroughly studied for their mechanical properties and failure behavior and their properties compared with those of synthetic fiber-based composites. Other properties, such as the thermal behavior of natural fibers and composites, have also been studied because they determine the performance of their products possible. It deals with the effect of temperature on adhesive curing, effect of high temperature and fire damage during fabrication. Further, the thermal properties have equal importance in structural applications such as temperature transfer from end to end, load capacity at specific temperature, material behavior and dimensional stability at high temperature. In this respect the isothermal and non-isothermal thermogravimatric analyses are discussed and the improtance of glass transition temperature is studied during prepapration of composites to ensure their ultimate properties. Although there are several works that have been done on thermal behavior, especially thermogravimetric analysis of natural fibers and their composites, there is no review article available specially focused on natural fiber-based composites, hybrid composites, and nanocomposites. The aim of this review was to focus on the advances in the comprehension of thermogravimetric behavior of natural fibers and compare the effect of natural fibers as reinforced materials in polymer composites.     

Inverted emulsion polymerization route to polyaniline‐3D nanofiber network using sulfonated‐p‐cresol as novel dopant

Sulfonated‐p‐cresol (SPC) was used as novel dopant for the first time in the synthesis of polyaniline in 3D nanofiber networks (PANI‐3D). Polyaniline in 3D nanofiber network was prepared using organic solvent soluble benzoyl peroxide as oxidizing agent in presence of SPC and sodium lauryl sulfate (SLS) surfactant via inverted emulsion polymerization pathway. The influence of synthesis conditions such as the concentration of the reactants, stirring/static condition, and temperature etc., on the properties and formation of polyaniline nanofiber network were investigated. Polyaniline in 3D nanofiber network with 40–160 nm (diameter), high yield (134 wt % with respect to aniline used), and reasonably good conductivity (0.1 S/cm) was obtained in 24 h time. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermal stability and strength of deformation microstructures in pure copper

The plastic flow field produced by machining is utilized to access a range of deformation parameters in pure copper: strains of 1–7, strain rates of 1–1000 s^?1 and temperatures as low as 77 K. The strength and stability of the severe plastic deformation microstructures including cellular, elongated, equiaxed and twinned types are characterized. Unique combinations of strengthening and stability are identified in the case of heavily twinned microstructures. These observations offer insights for improving the stability of both single-phase and multicomponent ultrafine-grained alloys.     

Synergetic effects of pulse constraints and additives in electrodeposition of nanocrystalline zinc: Corrosion,structural and textural characterization

Pulse electrodeposition was to produce nanocrystalline (nc) zinc from alkaline non-cyanide electrolyte with primary and secondary additives. The combined effect of pulse parameters (ON-time (T_ON), OFF-time (T_OFF), pulse peak current density (I_P)) and additives on the corrosion properties (evaluated using electrochemical techniques) of zinc electrodeposits are elucidated in terms of surface morphology (using scanning electron microscope), topography and root mean square (RMS) roughness (using atomic force microscope), crystallite size, its orientations and relative texture co-efficient (RTC, %) were evaluated using X-ray diffraction. The corrosion resistance of zinc electrodeposits obtained at constant T_ON and I_P enhanced (i.e., low I_corr and high R_ct values) with increased T_OFF. At constant T_OFF and I_P, the I_corr values increased and R_ct values decreased with T_ON while the former decreases and latter increases with I_P at constant T_ON and T_OFF. The inclusion of primary and secondary additives into the electrolyte produced nc zinc electrodeposits at 5 Adm^?2, showed enhanced protective properties (I_corr—16 μA cm^?2 and R_ct—481.8 Ω cm^?2). Fine grained due to high negative overpotential, reduced roughness and higher percentage of basal plane [0 0. 2] orientation have major impact for the enhanced corrosion resistances.     

Influence of processing parameters on wear resistance of nanostructured OFHC copper manufactured by large strain extrusion machining

The tribological behaviour of three ultra-fine grained oxygen-free high conductivity (OFHC) copper materials manufactured by large strain extrusion machining (LSEM), under variable shear strain, is studied under ball-on-flat reciprocating configuration and compared with that of conventional microstructured copper. The results are discussed as a function of microstructure and sliding direction. The lowest wear volume is obtained when the sliding takes place in the perpendicular direction to that of grain orientation. The highest wear resistance is observed for nanostructured copper material with an elongated grain structure in the extrusion direction. The wear resistance of this anisotropic material depends on the sliding direction. Wear mechanisms are discussed from scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) observations.     

Synthesis and Evaluation of a Nonsteroidal Anti-inflammatory Polymeric Prodrug for Sustained and Site-Specific Delivery

A new polymerizable drug derivative of diclofenac sodium was synthesized and characterized in terms of melting point, elemental analysis, and infrared spectroscopy. It was then polymerized to obtain a new polymeric prodrug. The prodrug was evaluated for its viscosity, drug content, and in vitro drug release behavior at pH 1.2 and 7.2. The in vitro studies showed that the drug release takes place predominantly at the higher pH and in a sustained manner, as hypothesized. Stability at room temperature, bioavailability, and ulcer-inducing effect of the polymeric prodrug were also studied. The investigations showed complete drug absorption from the polymeric prodrug with a statistically significant decrease in ulcer scoring effect, thus showing its potential for site-specific and sustained drug delivery.