Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites

The enhancement of the thermal conductivity, keeping the electrical insulation, of epoxy thermosets through the addition of pristine and oxidized carbon nanotubes (CNTs) and microplatelets of boron nitride (BN) was studied. Two different epoxy resins were selected: a cycloaliphatic (ECC) epoxy resin and a glycidylic (DGEBA) epoxy resin. The characteristics of the composites prepared were evaluated and compared in terms of thermal, thermomechanical, rheological and electrical properties. Two different dispersion methods were used in the addition of pristine and oxidized CNTs depending on the type of epoxy resin used. Slight changes in the kinetics of the curing reaction were observed in the presence of the fillers. The addition of pristine CNTs led to a greater enhancement of the mechanical properties of the ECC composite whereas the oxidized CNTs presented a greater effect in the DGEBA matrix. The addition of CNTs alone led to a marked decrease of the electrical resistivity of the composites. Nevertheless, in the presence of BN, which is an electrically insulating material, it was possible to increase the proportion of pristine CNTs to 0.25 wt% in the formulation without deterioration of the electrical resistivity. A small but significant synergic effect was determined when both fillers were added together. Improvements of about 750% and 400% in thermal conductivity were obtained in comparison to the neat epoxy matrix for the ECC and DGEBA composites, respectively. © 2019 Society of Chemical Industry     

Spatio-temporal evolution of the deformation around the Rio-Patras fault (Greece) observed by synthetic aperture radar interferometry from 1993 to 2017

We analysed the ground deformation across two blocks defined by the Rio-Patras fault from 1993 to 2017 using multi-temporal Synthetic Aperture Radar Interferometry (InSAR) techniques. Our main objective was to contribute to the assessment of seismic hazard near the large city of Patras. Multiple data-sets were used, each one covering different temporal periods. Descending and ascending acquisitions, providing different viewing geometries contribute to fully determine the ground displacement in 3D. The data-sets used are from the European Space Agency’s (ESA) European Remote Sensing (ERS), Environmental Satellite (ENVISAT) and SENTINEL-1 as well as German Aerospace Center (DLR) ’s TERRASAR-X missions. Considering ESA’s missions covering both acquisition geometries and long periods, the southern block, showing lack of a sufficient number of scatterers does not allow the displacement characterization. In contrary, the northern block is characterized by a high number of scatterers having values of maximum likehood ranging from ?3.5 to ?4.3 mm year^?1 for ascending geometry and from ?1.6 to ?2.7 mm year^?1 for the descending one. The fact that both geometries show negative values of displacements are consistent with downlift movement and at the same time the quantitative differentiation probably indicates an horizontal component as well.     

Multi-input,multi-output flight control system design for the YF-16 using nonlinear QFT and pilot compensation

Nonlinear quantitative feedback theory (QFT) and pilot compensation techniques are used to design a 2 × 2 flight control system for the YF-16 aircraft over a large range of plant uncertainty. The design is based on numerical input-output time histories generated with a FORTRAN implemented nonlinear simulation of the YF-16. The first step of the design process is the generation of a set of equivalent linear time-invariant (LTI) plant models to represent the actual nonlinear plant. It has been proven that the solution to the equivalent plant problem is guaranteed to solve the original nonlinear problem. Standard QFT techniques are then used in the design synthesis based on the equivalent plant models. A detailed mathematical development of the method used to develop these equivalent LTI plant models is provided. After this inner-loop design, pilot compensation is developed to reduce the pilot's workload. This outer-loop design is also based on a set of equivalent LTI plant models. This is accomplished by modelling the pilot with parameters that result in good handling qualities ratings, and developing the necessary compensation to force the desired system responses.     

On the formation and stability of dislocation patterns—I: One-dimensional considerations

By distinguishing among mobile and immobile dislocations and operating within the framework of continuum mechanics it is possible to derive a set of partial differential equations of the diffusion-reaction type for the evolution of dislocation species. On examining the competition between gradient dependent terms modelling the motion of dislocations and nonlinear terms modelling their interactions, it is shown that stable solutions are possible. The wavelength turns out to be a material property in agreement with observations. The discussion is limited to one dimension, that is to glide of straight dislocations in the slip direction, and the model corresponds physically to the ladder-like structure of persistent slip bands.     

The group lock and its applications

Parallel algorithms that use shared resources are notoriously difficult to write and verify, especially when properties such as fairness and efficiency are desired. This paper introduces a new synchronization method called the group lock. This method has some of the advantages of strict synchronization methods such as monitors; algorithms written using group lock are quite clear and easy to verify. At the same time, these algorithms generally make better use of parallelism than those written using stricter synchronization methods. In many cases we can obtain worst case time bounds that are constant or logarithmic in the number of processes, thus also insuring bounded fairness. The paper begins with a discussion of related synchronization methods and an introduction to the group lock. This is followed by some examples of applications in algorithms for a readers/writers problem, parallel stacks and queues, implementation of fetch- and-phi routines, and others. Finally, two implementations of group lock are described. A detailed implementation is given for the paracomputer, an idealized MIMD multiprocessor that supports the fetch-and-add synchronization instruction. An implementation is also outlined for general CREW multiprocessors using only reads and writes to shared memory.     

Transplantation for end stage liver disease related to alpha 1 antitrypsin

Alpha 1 antitrypsin deficiency (AT) is an autosomal recessive disease associated with chronic liver disease in adults and children and emphysema in adults. The disease is one of the most common inherited disorders of the Caucasian population of North Europe and North America and is the most common genetic reason for pediatric orthotopic liver transplantation (OLTx), although it is a rare indication in adults. The natural history of the disease is unpredictable and the pathogenesis of the liver injury unclear. Thirty-five patients with histologically apparent alpha 1 AT accumulation in the liver (22 adults, 13 children) have been transplanted in this center. Clinical features were correlated with the pretransplant phenotype, serum alpha 1 antitrypsin levels and potential precipitating factors. All children were PiZZ homozygotes, most of whom had presented with neonatal hepatitis. The majority of adult patients were heterozygotes presenting with portal hypertension and liver cirrhosis. Current one-year posttransplant survival figures are 73% for adults and 87.5% for children. Replacement of the cirrhotic liver results in acquisition of the donor phenotype, a rise in serum levels of alpha 1 antitrypsin, and apparent prevention of associated disease.     

Solar assisted cooling with sorption systems: status of the research in Mexico and Latin America

Solar refrigeration projects both national and international with sorption and other refrigeration systems have been developed in Mexico and other Latin American countries in the last 15 years. A review of the main projects, both for solar cooling and refrigeration and the results obtained are presented in this paper. A methodology where 19 solar technologies for cooling were identified is also presented. Although solar cooling is still not an economically viable technology, the advances made and the experience gained in the projects described and the improved systems envisaged, will make solar refrigeration systems play an important role in the future.     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.